Your message dated Thu, 27 Jun 2013 19:42:51 +0200 with message-id <20130627174251.GD4252@pisco.westfalen.local> and subject line Closing has caused the Debian Bug report #655944, regarding linux-image-3.1.0-1-amd64: Kernel threads use significant amount of CPU to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 655944: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=655944 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 3.1.8-2 Severity: normal On my laptop, kernel threads use somewhere between 25% - 80% of one of the CPUs, even on idle. At the suggestion of a friend, I looked at the contents of /sys/firmware/acpi/interrupts/, and noticed that gpe18 was rising at about 100000 a second. Searching through the standard logfiles didn't show anything related to gpe18, however looking through the installation logs, I found this line ACPI Error: No handler or method for GPE[18], disabling event (20090903/evgpe-706) which suggested that the issue was with ACPI. Decompiling the dsdt table and then recompiling according to http://en.gentoo- wiki.com/wiki/ACPI/Fix_common_problems in order to try to guess what hardware was the issue, gave me the three following errors: dsdt.dsl 2124: 0x00000000, // Length Error 4122 - ^ Invalid combination of Length and Min/Max fixed flags dsdt.dsl 2131: 0x07E00000, // Length Error 4118 - ^ Length is not equal to fixed Min/Max window dsdt.dsl 2138: 0x00000F00, // Length Error 4118 - ^ Length is not equal to fixed Min/Max window Is there any other information that would be useful in finding out why the CPU usage is so high? -- Package-specific info: ** Version: Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 05:01:58 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/pandora-root ro quiet ** Not tainted ** Kernel log: [ 5.369898] ATOM BIOS: Lenovo [ 5.369958] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 5.369962] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 5.377902] iwlagn 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 5.377906] iwlagn 0000:03:00.0: Device SKU: 0X50 [ 5.377909] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 5.381232] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 5.381236] [drm] Detected VRAM RAM=1024M, BAR=256M [ 5.381239] [drm] RAM width 128bits DDR [ 5.381294] [TTM] Zone kernel: Available graphics memory: 4089264 kiB. [ 5.381296] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 5.381298] [TTM] Initializing pool allocator. [ 5.381323] [drm] radeon: 1024M of VRAM memory ready [ 5.381325] [drm] radeon: 512M of GTT memory ready. [ 5.381342] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.381344] [drm] Driver supports precise vblank timestamp query. [ 5.381355] iwlagn 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 5.381434] radeon 0000:01:00.0: irq 44 for MSI/MSI-X [ 5.381442] radeon 0000:01:00.0: radeon: using MSI. [ 5.381489] [drm] radeon: irq initialized. [ 5.381495] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 5.382093] [drm] Loading REDWOOD Microcode [ 5.386113] iwlagn 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [ 5.386225] Registered led device: phy0-led [ 5.389763] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.393030] radeon 0000:01:00.0: WB enabled [ 5.398958] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8 [ 5.409318] [drm] ring test succeeded in 1 usecs [ 5.409449] [drm] radeon: ib pool ready. [ 5.409515] [drm] ib test succeeded in 0 usecs [ 5.409521] failed to evaluate ATIF got AE_BAD_PARAMETER [ 5.409913] [drm] Radeon Display Connectors [ 5.409916] [drm] Connector 0: [ 5.409918] [drm] LVDS [ 5.409921] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 5.409923] [drm] Encoders: [ 5.409925] [drm] LCD1: INTERNAL_UNIPHY [ 5.409927] [drm] Connector 1: [ 5.409929] [drm] HDMI-A [ 5.409931] [drm] HPD1 [ 5.409934] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 5.409936] [drm] Encoders: [ 5.409938] [drm] DFP1: INTERNAL_UNIPHY1 [ 5.409940] [drm] Connector 2: [ 5.409942] [drm] VGA [ 5.409945] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 5.409947] [drm] Encoders: [ 5.409949] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 5.419121] hda_codec: ALC272: BIOS auto-probing. [ 5.420993] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 5.423385] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.423457] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.791097] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input12 [ 5.890320] [drm] Radeon display connector LVDS-1: No monitor connected or invalid EDID [ 5.902185] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 5.913001] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [ 5.913050] [drm] Internal thermal controller with fan control [ 5.913097] [drm] radeon: power management initialized [ 6.557674] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04733/0xa40000/0xa0400 [ 6.596981] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 7.268467] [drm] fb mappable at 0xD0141000 [ 7.268470] [drm] vram apper at 0xD0000000 [ 7.268472] [drm] size 4325376 [ 7.268473] [drm] fb depth is 24 [ 7.268474] [drm] pitch is 5632 [ 7.268605] fbcon: radeondrmfb (fb0) is primary device [ 7.593749] Console: switching to colour frame buffer device 170x48 [ 7.597621] fb0: radeondrmfb frame buffer device [ 7.597623] drm: registered panic notifier [ 7.597633] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0 [ 7.597699] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.597811] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 7.597848] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 7.618259] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 7.618492] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 8.107705] EXT3-fs (dm-0): using internal journal [ 8.119007] loop: module loaded [ 9.759130] Adding 4317180k swap on /dev/mapper/pandora-swap_1. Priority:-1 extents:1 across:4317180k [ 9.804159] kjournald starting. Commit interval 5 seconds [ 9.804289] EXT3-fs (dm-2): using internal journal [ 9.804294] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 9.982187] fuse init (API version 7.17) [ 10.247572] lp: driver loaded but no devices found [ 10.249375] ppdev: user-space parallel port driver [ 10.301106] tg3 0000:05:00.0: irq 46 for MSI/MSI-X [ 10.312433] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.873796] tg3 0000:05:00.0: eth0: Link is down [ 11.140985] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 11.873520] tg3 0000:05:00.0: eth0: Link is down [ 14.872606] tg3 0000:05:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 14.872609] tg3 0000:05:00.0: eth0: Flow control is off for TX and off for RX [ 14.873042] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.092876] eth0: no IPv6 routers present [ 3484.148885] Bluetooth: Core ver 2.16 [ 3484.148904] NET: Registered protocol family 31 [ 3484.148906] Bluetooth: HCI device and connection manager initialized [ 3484.148909] Bluetooth: HCI socket layer initialized [ 3484.148911] Bluetooth: L2CAP socket layer initialized [ 3484.148919] Bluetooth: SCO socket layer initialized [ 5956.124165] reportbug[12086]: segfault at 4 ip 00007f9c51fb922e sp 00007f9c4b517a10 error 4 in libpango-1.0.so.0.2904.0[7f9c51fa7000+4b000] ** Model information sys_vendor: LENOVO product_name: IdeaPad Y560p product_version: Rev 1.0 chassis_vendor: LENOVO chassis_version: Rev 1.0 bios_vendor: LENOVO bios_version: 3FCN19WW board_vendor: LENOVO board_name: KL3 board_version: Rev 1.0 ** Loaded modules: bluetooth crc16 msr parport_pc ppdev lp parport acpi_cpufreq mperf cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace uinput fuse ext2 coretemp loop snd_hda_codec_hdmi joydev snd_hda_codec_realtek arc4 radeon snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq iwlagn snd_timer snd_seq_device ttm mac80211 drm_kms_helper drm uvcvideo snd cfg80211 videodev jmb38x_ms iTCO_wdt ideapad_laptop i2c_algo_bit media v4l2_compat_ioctl32 soundcore sparse_keymap pcspkr evdev psmouse serio_raw iTCO_vendor_support memstick i2c_i801 snd_page_alloc rfkill i2c_core wmi battery ac power_supply video button processor ext3 jbd mbcache dm_mod sr_mod cdrom sd_mod crc_t10dif ahci libahci libata scsi_mod broadcom ehci_hcd usbcore sdhci_pci sdhci mmc_core tg3 libphy thermal thermal_sys ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 60:eb:69:e8:0d:a7 brd ff:ff:ff:ff:ff:ff inet 192.168.1.134/24 brd 192.168.1.255 scope global eth0 inet6 fe80::62eb:69ff:fee8:da7/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 8c:a9:82:32:31:e8 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 10152 124 0 0 0 0 0 0 10152 124 0 0 0 0 0 0 eth0: 19948339 108125 0 0 0 0 0 1060 10065431 103987 0 0 0 0 0 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 105961 total packets received 5 with invalid addresses 0 forwarded 0 incoming packets discarded 105956 incoming packets delivered 103339 requests sent out 48 outgoing packets dropped Icmp: 56 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 56 56 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 56 IcmpMsg: InType3: 56 OutType3: 56 Tcp: 221 active connections openings 0 passive connection openings 4 failed connection attempts 14 connection resets received 5 connections established 5907 segments received 6097 segments send out 13 segments retransmited 0 bad segments received. 41 resets sent Udp: 99347 packets received 56 packets to unknown port received. 0 packet receive errors 97252 packets sent UdpLite: TcpExt: 138 TCP sockets finished time wait in fast timer 98 delayed acks sent 1 delayed acks further delayed because of locked socket Quick ack mode was activated 15 times 3764 packet headers predicted 676 acknowledgments not containing data payload received 904 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 5 other TCP timeouts 15 DSACKs sent for old packets 2 DSACKs received 3 connections reset due to unexpected data 14 connections reset due to early user close 2 connections aborted due to timeout TCPSackShiftFallback: 10 IpExt: InMcastPkts: 1078 OutMcastPkts: 443 InBcastPkts: 2313 InOctets: 17834312 OutOctets: 8099877 InMcastOctets: 175732 OutMcastOctets: 79202 InBcastOctets: 445389 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: cfe00000-cfefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8806800 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f8807000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f8800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f81fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: f8400000-f84fffff Prefetchable memory behind bridge: 00000000e0400000-00000000e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f8200000-f83fffff Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: f8500000-f85fffff Prefetchable memory behind bridge: 00000000e0100000-00000000e03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f8807400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) Subsystem: Lenovo Device [17aa:3975] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:3975] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 1818 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1810 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 1820 [size=32] Region 5: Memory at f8806000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Lenovo Device [17aa:3975] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f8807800 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1840 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [Mobility Radeon HD 5000 Series] [1002:68c0] (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:3978] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at cfee0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 2000 [size=256] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Audio device [0403]: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series] [1002:aa60] Subsystem: Lenovo Device [17aa:3978] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 45 Region 0: Memory at cfedc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01) Subsystem: Lenovo Device [17aa:3975] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f8400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 09:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2387] (rev 20) Subsystem: Lenovo Device [17aa:3921] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f8500000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at e0100000 [disabled] [size=64K] Capabilities: <access denied> 09:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2386] (rev 20) (prog-if 01) Subsystem: Lenovo Device [17aa:3922] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f8500400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 09:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2388] (rev 20) Subsystem: Lenovo Device [17aa:3923] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f8500800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: jmb38x_ms 09:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2389] (rev 20) Subsystem: Lenovo Device [17aa:3924] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at f8500c00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 064e:f207 Suyin Corp. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.1.0-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.1.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.1.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.1.0-1-amd64 suggests: pn grub-pc 1.99-14 pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi 0.34 pn firmware-linux 0.34 pn firmware-linux-nonfree 0.34 pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: * linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64: linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
--- End Message ---
--- Begin Message ---Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.x / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to cont...@bugs.debian.org with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---
