--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-34squeeze1
Severity: normal
after upgrading the kernel, my laptop seems to crash immediately after closing
the laptop screen. i've seen it happen both when running console (screen goes
black and stays black) or when running X (screen freezes, but whatever content
was there remains visible).
previous versions (including 2.6.32-31, just confirmed) worked fine, in that
closing the lid didn't really do anything.
so far, it seems to be completely repeatable.
live well,
vagrant
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-34squeeze1) (da...@debian.org) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 07:08:50 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/lilwalrus-rt ro keyboard=us
quiet
** Not tainted
** Kernel log:
[ 14.514303] nsc-ircc, chip->init
[ 14.514315] nsc-ircc, Found chip at base=0x02e
[ 14.514339] nsc-ircc, driver loaded (Dag Brattli)
[ 14.514544] nsc_ircc_open(), can't get iobase of 0x2f8
[ 14.514571] nsc-ircc, Found chip at base=0x02e
[ 14.514595] nsc-ircc, driver loaded (Dag Brattli)
[ 14.514601] nsc_ircc_open(), can't get iobase of 0x2f8
[ 14.515534] nsc-ircc 00:06: disabled
[ 14.614073] lib80211: common routines for IEEE802.11 drivers
[ 14.614079] lib80211_crypt: registered algorithm 'NULL'
[ 15.013847] [drm] Initialized drm 1.1.0 20060810
[ 15.038928] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 15.038935] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketr...@linux.intel.com>
[ 15.240345] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 15.240351] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 15.240803] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[ 15.240808] PCI: setting IRQ 5 as level-triggered
[ 15.240816] ipw2100 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 5 (level,
low) -> IRQ 5
[ 15.241488] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 15.241513] ipw2100 0000:02:04.0: firmware: requesting ipw2100-1.3.fw
[ 15.795771] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level,
low) -> IRQ 10
[ 15.795781] i915 0000:00:02.0: setting latency timer to 64
[ 15.801373] [drm] set up 7M of stolen space
[ 15.950305] [drm] initialized overlay support
[ 16.212227] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:0150]
[ 16.340844] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0018, PCI irq 10
[ 16.340851] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 16.340858] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02)
from #02 to #06
[ 16.340872] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O
window: 0x3000 - 0x3fff
[ 16.340878] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
clean.
[ 16.341260] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory
window: 0xe0200000 - 0xe02fffff
[ 16.341265] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory
window: 0x48000000 - 0x4fffffff
[ 16.352161] yenta_cardbus 0000:02:03.1: CardBus bridge found [1028:0150]
[ 16.752833] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0018, PCI irq 10
[ 16.752839] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[ 16.752845] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02)
from #06 to #0a
[ 16.752856] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O
window: 0x3000 - 0x3fff
[ 16.752862] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff:
clean.
[ 16.753241] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory
window: 0xe0200000 - 0xe02fffff
[ 16.753246] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory
window: 0x48000000 - 0x4fffffff
[ 16.932969] Console: switching to colour frame buffer device 128x48
[ 16.941850] fb0: inteldrmfb frame buffer device
[ 16.941853] registered panic notifier
[ 16.943520] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.943596] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 16.943622] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 16.948818] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 16.948856] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 17.537475] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
clean.
[ 17.538347] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x4d0-0x4d7
[ 17.538744] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
[ 17.539077] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
[ 17.539586] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[ 17.540188] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
clean.
[ 17.541053] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
excluding 0x4d0-0x4d7
[ 17.541451] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 17.541784] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 17.542301] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 17.776041] intel8x0_measure_ac97_clock: measured 55370 usecs (2668 samples)
[ 17.776047] intel8x0: clocking to 48000
[ 18.579297] EXT3 FS on dm-1, internal journal
[ 19.095737] loop: module loaded
[ 20.015677] Adding 1265656k swap on /dev/mapper/lilwalrus-sw. Priority:-1
extents:1 across:1265656k
[ 23.072236] kjournald starting. Commit interval 5 seconds
[ 23.072628] EXT3 FS on sda1, internal journal
[ 23.072636] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.125596] kjournald starting. Commit interval 5 seconds
[ 23.128376] EXT3 FS on dm-3, internal journal
[ 23.128382] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.176376] kjournald starting. Commit interval 5 seconds
[ 23.180375] EXT3 FS on dm-4, internal journal
[ 23.180381] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.847978] fuse init (API version 7.13)
[ 26.796614] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 28.761778] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 29.829748] ttyS1: LSR safety check engaged!
[ 32.624778] tun: Universal TUN/TAP device driver, 1.6
[ 32.624784] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 33.087397] apm: BIOS not found.
[ 33.872740] Bluetooth: Core ver 2.15
[ 33.873264] NET: Registered protocol family 31
[ 33.873268] Bluetooth: HCI device and connection manager initialized
[ 33.873275] Bluetooth: HCI socket layer initialized
[ 33.962996] Bluetooth: L2CAP ver 2.14
[ 33.963001] Bluetooth: L2CAP socket layer initialized
[ 34.145354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.145359] Bluetooth: BNEP filters: protocol multicast
[ 34.496795] Bridge firewalling registered
[ 34.664053] lp: driver loaded but no devices found
[ 34.704245] Bluetooth: SCO (Voice Link) ver 0.6
[ 34.704249] Bluetooth: SCO socket layer initialized
[ 34.731372] ppdev: user-space parallel port driver
[ 44.697936] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 44.697943] vboxdrv: Successfully done.
[ 44.697946] vboxdrv: Found 1 processor cores.
[ 44.699334] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 44.699339] vboxdrv: Successfully loaded version 3.2.10_OSE (interface
0x00140001).
[ 82.128777] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 92.888136] eth1: no IPv6 routers present
[ 167.034593] ipw2100: Fatal interrupt. Scheduling firmware restart.
** Model information
not available
** Loaded modules:
Module Size Used by
vboxnetadp 5118 0
vboxnetflt 12633 0
vboxdrv 126614 2 vboxnetadp,vboxnetflt
acpi_cpufreq 4915 0
cpufreq_conservative 4018 0
cpufreq_userspace 1444 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
parport_pc 15799 0
ppdev 4058 0
sco 5885 2
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
bridge 32883 0
stp 996 1 bridge
bnep 7384 2
l2cap 21709 3 bnep
crc16 1027 1 l2cap
bluetooth 36251 5 sco,bnep,l2cap
rfkill 10196 2 bluetooth
tun 8740 4
uinput 4796 1
fuse 44052 1
loop 9729 0
firewire_sbp2 9579 0
pcmcia 16194 0
snd_intel8x0 19595 0
snd_intel8x0m 8100 0
snd_ac97_codec 79148 2 snd_intel8x0,snd_intel8x0m
i915 222350 1
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 3 snd_intel8x0,snd_intel8x0m,snd_ac97_codec
yenta_socket 16403 2
snd_seq 35327 0
drm_kms_helper 18533 1 i915
ipw2100 53248 0
rsrc_nonstatic 7057 1 yenta_socket
pcmcia_core 20414 3 pcmcia,yenta_socket,rsrc_nonstatic
libipw 18403 1 ipw2100
snd_timer 12258 2 snd_pcm,snd_seq
drm 111844 2 i915,drm_kms_helper
lib80211 2834 1 libipw
snd_seq_device 3673 1 snd_seq
snd 34387 7
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
i2c_i801 6462 0
i2c_algo_bit 3497 1 i915
joydev 6739 0
rng_core 2178 0
shpchp 21220 0
snd_page_alloc 4977 3 snd_intel8x0,snd_intel8x0m,snd_pcm
pci_hotplug 18065 1 shpchp
i2c_core 12751 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
irda 75924 0
psmouse 44777 0
video 14605 1 i915
crc_ccitt 1039 1 irda
serio_raw 2916 0
evdev 5609 14
output 1204 1 video
container 1833 0
processor 26259 2 acpi_cpufreq
ac 1640 0
battery 3782 0
button 3598 1 i915
pcspkr 1207 0
dcdbas 3860 0
ext3 93944 4
jbd 31965 1 ext3
mbcache 3762 1 ext3
sha256_generic 10748 2
aes_i586 6816 2
aes_generic 25738 1 aes_i586
cbc 2047 1
dm_crypt 9196 1
dm_mod 45842 18 dm_crypt
sd_mod 25937 3
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
fan 2586 0
uhci_hcd 15989 0
ata_piix 17704 2
firewire_ohci 16693 0
thermal 9206 0
tg3 88137 0
libata 115513 2 ata_generic,ata_piix
ehci_hcd 28453 0
firewire_core 31107 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
thermal_sys 9378 4 video,processor,fan,thermal
libphy 11606 1 tg3
usbcore 98541 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
scsi_mod 104613 3 firewire_sbp2,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Dell Device [1028:0150]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Dell Device [1028:0150]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Dell Device [1028:0150]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM
Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated
Graphics Device [8086:3582] (rev 02)
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0150]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 48000000-4fffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 01)
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: Broadcom Corporation Device [14e4:4d64]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
02:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0212000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 48000000-4bfff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:03.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
Subsystem: Dell Device [1028:0150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e0213000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 4c000000-4ffff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:03.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller
[1180:0552] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0150]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e0211000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation Device [8086:2565]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0210000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
02:05.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M
Gigabit Ethernet [14e4:165d] (rev 01)
Subsystem: Dell Device [1028:2003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (210,
'proposed-updates'), (130, 'testing'), (120, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-34squeeze1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.28 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
