Your message dated Mon, 24 Jun 2013 20:11:15 +0200 with message-id <20130624181115.GB19955@pisco.westfalen.local> and subject line Closing has caused the Debian Bug report #626021, regarding linux-image-2.6.38-2-686: icebp (opcode 0xf1) no longer causing a SIGTRAP, breaks Wine to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 626021: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=626021 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.38-3 Severity: normal This is a bug in the kernel itself, there have been a few patches to the kernel, but it seems at least one patch is not in the vanilla kernel. Some other distributions are including this patch. See https://bugzilla.kernel.org/show_bug.cgi?id=16315 and http://bugs.winehq.org/show_bug.cgi?id=23323 for more info. -- Package-specific info: ** Version: Linux version 2.6.38-2-686 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=fc173ee2-9266-4bce-b5c3-ff468730f225 ro quiet ** Not tainted ** Kernel log: [ 0.664763] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.664919] Linux agpgart interface v0.103 [ 0.665034] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.665505] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.665516] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.665606] mousedev: PS/2 mouse device common for all mice [ 0.665792] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.665965] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.666036] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.666047] cpuidle: using governor ladder [ 0.666048] cpuidle: using governor menu [ 0.666192] TCP cubic registered [ 0.666292] NET: Registered protocol family 10 [ 0.666726] Mobile IPv6 [ 0.666730] NET: Registered protocol family 17 [ 0.666735] Registering the dns_resolver key type [ 0.666751] Using IPI No-Shortcut mode [ 0.666819] PM: Hibernation image not present or could not be loaded. [ 0.666826] registered taskstats version 1 [ 0.666928] rtc_cmos 00:01: setting system clock to 2011-05-06 19:42:14 UTC (1304710934) [ 0.666944] Initalizing network drop monitor service [ 0.666997] Freeing unused kernel memory: 392k freed [ 0.667098] Write protecting the kernel text: 2648k [ 0.667109] Write protecting the kernel read-only data: 1000k [ 0.679883] <30>udev[45]: starting version 167 [ 0.695518] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.695633] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.695654] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 [ 0.744936] FDC 0 is a S82078B [ 0.745467] 8139cp 0000:00:03.0: eth0: RTL-8139C+ at 0xc8806000, 52:54:00:12:34:56, IRQ 11 [ 0.745490] 8139cp 0000:00:03.0: setting latency timer to 64 [ 0.747229] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.748483] SCSI subsystem initialized [ 0.759932] libata version 3.00 loaded. [ 0.761768] ata_piix 0000:00:01.1: version 2.13 [ 0.761824] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.762212] scsi0 : ata_piix [ 0.762298] scsi1 : ata_piix [ 0.762328] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 0.762330] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 [ 0.916539] ata1.01: NODEV after polling detection [ 0.916751] ata2.01: NODEV after polling detection [ 0.916959] ata1.00: ATA-7: QEMU HARDDISK, 0.13.0, max UDMA/100 [ 0.916961] ata1.00: 20971520 sectors, multi 16: LBA48 [ 0.917096] ata2.00: ATAPI: QEMU DVD-ROM, 0.13.0, max UDMA/100 [ 0.917408] ata1.00: configured for MWDMA2 [ 0.917492] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.13 PQ: 0 ANSI: 5 [ 0.917864] ata2.00: configured for MWDMA2 [ 0.918137] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.13 PQ: 0 ANSI: 5 [ 0.928603] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 0.928628] sd 0:0:0:0: [sda] Write Protect is off [ 0.928630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.928641] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.929229] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray [ 0.929231] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.929407] sda: sda1 sda2 < sda5 > [ 0.929622] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.929692] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.937670] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.937936] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.081266] PM: Starting manual resume from disk [ 1.081268] PM: Hibernation image partition 8:5 present [ 1.081269] PM: Looking for hibernation image. [ 1.081464] PM: Image not found (code -22) [ 1.081466] PM: Hibernation image not present or could not be loaded. [ 1.098886] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.256117] Refined TSC clocksource calibration: 3208.200 MHz. [ 2.327907] <30>udev[221]: starting version 167 [ 2.866819] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 2.875538] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.875595] ACPI: Power Button [PWRF] [ 3.027189] ACPI: acpi_idle registered with cpuidle [ 3.034228] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 3.064355] parport_pc 00:05: reported by Plug and Play ACPI [ 3.064456] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3.413261] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 3.695100] Adding 242684k swap on /dev/sda5. Priority:-1 extents:1 across:242684k [ 3.697603] EXT4-fs (sda1): re-mounted. Opts: (null) [ 3.870966] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.936586] loop: module loaded [ 4.680018] RPC: Registered udp transport module. [ 4.680020] RPC: Registered tcp transport module. [ 4.680022] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.729342] FS-Cache: Loaded [ 4.788979] FS-Cache: Netfs 'nfs' registered for caching [ 4.811188] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 5.009417] fuse init (API version 7.16) [ 5.128988] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 8.738152] sshd (1211): /proc/1211/oom_adj is deprecated, please use /proc/1211/oom_score_adj instead. [ 15.440096] eth0: no IPv6 routers present [85213.445248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [85213.445254] ata1.00: failed command: WRITE DMA EXT [85213.445262] ata1.00: cmd 35/00:00:00:a8:3e/00:04:00:00:00/e0 tag 0 dma 524288 out [85213.445264] res 40/00:ff:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [85213.445267] ata1.00: status: { DRDY } [85213.447954] ata1: soft resetting link [85213.604314] ata1.01: NODEV after polling detection [85213.604870] ata1.00: configured for MWDMA2 [85213.604873] ata1.00: device reported invalid CHS sector 0 [85213.604882] ata1: EH complete ** Model information not available ** Loaded modules: Module Size Used by fuse 55640 1 nfsd 196206 2 exportfs 12527 1 nfsd nfs 214151 0 lockd 60890 2 nfsd,nfs fscache 31438 1 nfs nfs_acl 12463 2 nfsd,nfs auth_rpcgss 31739 2 nfsd,nfs sunrpc 136969 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss loop 17805 0 parport_pc 21895 0 tpm_tis 12949 0 tpm 17454 1 tpm_tis tpm_bios 12799 1 tpm i2c_piix4 12480 0 processor 26983 0 parport 27018 1 parport_pc i2c_core 18989 1 i2c_piix4 psmouse 45863 0 serio_raw 12758 0 button 12866 0 pcspkr 12515 0 evdev 13084 5 thermal_sys 17667 1 processor ext4 251726 1 mbcache 12810 1 ext4 jbd2 55701 1 ext4 crc16 12327 1 ext4 sg 21385 0 sr_mod 17418 0 sd_mod 34941 3 cdrom 34631 1 sr_mod crc_t10dif 12332 1 sd_mod ata_generic 12439 0 ata_piix 21079 2 libata 131904 2 ata_generic,ata_piix 8139too 21937 0 scsi_mod 134369 4 sg,sr_mod,sd_mod,libata floppy 47893 0 8139cp 22004 0 mii 12562 2 8139too,8139cp ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 brd 10.0.2.255 scope global eth0 inet6 fe80::5054:ff:fe12:3456/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 123056726 309302 0 0 0 0 0 0 123056726 309302 0 0 0 0 0 0 eth0: 136430495 117016 0 0 0 0 0 0 9223650 80741 0 0 0 0 0 0 *** Protocol statistics: Ip: 423769 total packets received 0 forwarded 3 with unknown protocol 0 incoming packets discarded 423766 incoming packets delivered 387273 requests sent out Icmp: 146 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 146 112 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 112 IcmpMsg: InType3: 146 OutType3: 112 Tcp: 8925 active connections openings 2382 passive connection openings 3133 failed connection attempts 739 connection resets received 0 connections established 422005 segments received 385498 segments send out 38 segments retransmited 0 bad segments received. 4572 resets sent Udp: 3773 packets received 112 packets to unknown port received. 0 packet receive errors 4119 packets sent UdpLite: TcpExt: 4273 TCP sockets finished time wait in fast timer 4387 delayed acks sent 93 delayed acks further delayed because of locked socket 64 times the listen queue of a socket overflowed 64 SYNs to LISTEN sockets dropped 33832 packets directly queued to recvmsg prequeue. 665447 bytes directly in process context from backlog 42938983 bytes directly received in process context from prequeue 79756 packet headers predicted 31735 packets header predicted and directly queued to user 140357 acknowledgments not containing data payload received 23470 predicted acknowledgments 34 other TCP timeouts 2 times receiver scheduled too late for direct processing 156 connections reset due to unexpected data 568 connections reset due to early user close 1 connections aborted due to timeout IpExt: InBcastPkts: 232 OutBcastPkts: 224 InOctets: 259310303 OutOctets: 130967241 InBcastOctets: 13496 OutBcastOctets: 10496 *** Device features: eth0: 0x180 lo: 0x13865 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master]) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c000 [size=16] Kernel driver in use: ata_piix 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 Kernel driver in use: piix4_smbus 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device [1af4:1100] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at f2010000 [disabled] [size=64K] 00:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20) Subsystem: Red Hat, Inc Device [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c100 [size=256] Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=256] Expansion ROM at f2030000 [disabled] [size=64K] Kernel driver in use: 8139cp ** Sound cards: -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-2-686 depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-686 recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.38-2-686 suggests: ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686: linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:
--- End Message ---
--- Begin Message ---Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.x / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to cont...@bugs.debian.org with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---
