Package: src:linux
Version: 3.9.6-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation? Update to this kernel version from previous
linux-image-3.2.0-4-amd64.
* What exactly did you do (or not do) that was effective (or
ineffective)? Start with the updated kernel.
* What was the outcome of this action? Fan never starts.
* What outcome did you expect instead? Fan starts depending on the cpu
temperature, as did with the previous kernel.
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64
root=UUID=0e6aeaa9-31fb-4c6c-adf4-e9b5770cf256 ro quiet
** Not tainted
** Kernel log:
[ 1.855166] ACPI: Battery Slot [C1B4] (battery present)
[ 1.855297] ACPI: Battery Slot [C1B3] (battery absent)
[ 1.855730] ACPI: AC Adapter [C1B2] (on-line)
[ 1.857083] wmi: Mapper loaded
[ 1.857724] hp_accel: laptop model unknown, using default axes configuration
[ 1.872053] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.878658] cfg80211: Calling CRDA to update world regulatory domain
[ 1.883976] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 1.884100] lis3lv02d: 12 bits sensor found
[ 1.920449] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 1.932697] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 1.967307] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection
driver for Linux, in-tree:s
[ 1.967314] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 1.984332] intel_rng: FWH not detected
[ 1.992088] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.002650] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.040279] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30b1]
[ 2.040309] yenta_cardbus 0000:02:06.0: Enabling burst memory read
transactions
[ 2.040317] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts
to PCI
[ 2.040322] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 2.040331] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[ 2.048088] usb 3-1: New USB device found, idVendor=046d, idProduct=c018
[ 2.048095] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.048100] usb 3-1: Product: USB Optical Mouse
[ 2.048104] usb 3-1: Manufacturer: Logitech
[ 2.094294] tpm_tis 00:01: Adjusting TPM timeout parameters.
[ 2.095296] [drm] Memory usable by graphics device = 256M
[ 2.095310] i915 0000:00:02.0: setting latency timer to 64
[ 2.114475] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.114480] [drm] Driver supports precise vblank timestamp query.
[ 2.114614] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.129165] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a
channels
[ 2.129173] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 2.129339] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X
[ 2.192351] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 2.194473] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 2.214403] cfg80211: World regulatory domain updated:
[ 2.214409] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 2.214414] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 2.214418] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 2.214422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 2.214426] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 2.214429] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 2.254985] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.260221] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input8
[ 2.272844] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[ 2.272854] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 2.272861] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02)
from #03 to #06
[ 2.272888] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window:
[io 0x5000-0x5fff]
[ 2.272894] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window:
[mem 0xf4200000-0xf45fffff]
[ 2.272900] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf4200000-0xf45fffff:
[ 2.272907] excluding 0xf4200000-0xf423ffff
[ 2.272929] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window:
[mem 0xa0000000-0xa3ffffff pref]
[ 2.272935] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa3ffffff:
[ 2.272954] excluding 0xa0000000-0xa3ffffff
[ 2.275209] usbcore: registered new interface driver usbhid
[ 2.275214] usbhid: USB HID core driver
[ 2.301021] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input9
[ 2.301375] hid-generic 0003:046D:C018.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.346797] [drm] initialized overlay support
[ 2.530838] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id:
0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 240405
[ 2.530856] psmouse serio4: synaptics: serio: Synaptics pass-through port at
isa0060/serio4/input0
[ 2.572942] fbcon: inteldrmfb (fb0) is primary device
[ 2.586768] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input10
[ 3.048104] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 3.244094] Console: switching to colour frame buffer device 128x48
[ 3.247322] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.247325] i915 0000:00:02.0: registered panic notifier
[ 3.247334] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.247451] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO
conflicts with Region \_SB_.C002.C003.C0BA 1 (20130117/utaddress-251)
[ 3.247459] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.247464] ACPI Warning: 0x0000000000001130-0x000000000000113f SystemIO
conflicts with Region \_SB_.C002.C003.C0CC 1 (20130117/utaddress-251)
[ 3.247470] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.247472] ACPI Warning: 0x0000000000001100-0x000000000000112f SystemIO
conflicts with Region \_SB_.C002.C003.C0CC 1 (20130117/utaddress-251)
[ 3.247478] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.247480] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.248497] leds_ss4200: no LED devices found
[ 3.255780] iTCO_vendor_support: vendor-support=0
[ 3.256466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.256529] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2,
TCOBASE=0x1060)
[ 3.256732] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.645714] Adding 1987580k swap on /dev/sda2. Priority:-1 extents:1
across:1987580k SSD
[ 3.663684] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.561021] EXT4-fs (sda1): re-mounted. Opts:
commit=600,discard,errors=remount-ro
[ 4.609791] fuse init (API version 7.21)
[ 4.631188] loop: module loaded
[ 5.571733] Bridge firewalling registered
[ 5.576919] device eth0 entered promiscuous mode
[ 5.579570] tg3 0000:08:00.0: irq 45 for MSI/MSI-X
[ 5.750675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.752422] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 5.907286] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 7.388446] tg3 0000:08:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 7.388455] tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX
[ 7.388488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.388524] br0: port 1(eth0) entered forwarding state
[ 7.388537] br0: port 1(eth0) entered forwarding state
[ 7.388565] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 8.525724] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio4/serio5/input/input11
[ 22.432041] br0: port 1(eth0) entered forwarding state
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq nc4400 (EY605EA#ABD)
product_version: F.0C
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68YHV Ver. F.0C
board_vendor: Hewlett-Packard
board_name: 30B1
board_version: KBC Version 59.35
** Loaded modules:
binfmt_misc
bridge
stp
llc
loop
fuse
iTCO_wdt
iTCO_vendor_support
tpm_infineon
hid_generic
pcmcia
joydev
usbhid
hid
arc4
hp_wmi
sparse_keymap
coretemp
kvm_intel
kvm
lpc_ich
mfd_core
psmouse
pcspkr
serio_raw
rng_core
evdev
snd_hda_codec_si3054
iwl3945
iwlegacy
snd_hda_codec_analog
mac80211
tpm_tis
yenta_socket
tifm_7xx1
tpm
tifm_core
pcmcia_rsrc
tpm_bios
pcmcia_core
i915
hp_accel
lis3lv02d
input_polldev
snd_hda_intel
cfg80211
rfkill
snd_hda_codec
video
snd_hwdep
snd_pcm
drm_kms_helper
wmi
snd_page_alloc
ac
snd_timer
battery
drm
snd
i2c_algo_bit
soundcore
acpi_cpufreq
mperf
i2c_core
button
processor
ext4
crc16
jbd2
mbcache
dm_mod
sg
sd_mod
crc_t10dif
ata_generic
microcode
sdhci_pci
ahci
libahci
ata_piix
tg3
ptp
sdhci
mmc_core
ehci_pci
uhci_hcd
ehci_hcd
thermal
pps_core
libphy
fan
thermal_sys
libata
usbcore
scsi_mod
usb_common
** Network interface configuration:
auto lo br0
iface lo inet loopback
iface eth0 inet manual
iface br0 inet static
bridge_ports eth0
address 192.168.2.23
broadcast 192.168.2.255
netmask 255.255.255.0
gateway 192.168.2.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state
UP qlen 1000
link/ether 00:16:d4:a4:9c:14 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:19:d2:25:ca:a2 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:16:d4:a4:9c:14 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.23/24 brd 192.168.2.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::216:d4ff:fea4:9c14/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
br0: 1061673 1051 0 0 0 0 0 0 54390
546 0 0 0 0 0 0
eth0: 1080567 1048 0 0 0 0 0 12 57447
551 0 0 0 0 0 0
lo: 577 9 0 0 0 0 0 0 577
9 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
794 total packets received
0 forwarded
0 incoming packets discarded
794 incoming packets delivered
525 requests sent out
Icmp:
3 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 3
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 3
IcmpMsg:
InType3: 3
OutType3: 3
Tcp:
6 active connections openings
0 passive connection openings
3 failed connection attempts
0 connection resets received
0 connections established
729 segments received
472 segments send out
0 segments retransmited
0 bad segments received.
4 resets sent
Udp:
21 packets received
0 packets to unknown port received.
0 packet receive errors
31 packets sent
UdpLite:
TcpExt:
5 delayed acks sent
608 packet headers predicted
15 acknowledgments not containing data payload received
TCPRcvCoalesce: 75
TCPOFOQueue: 76
IpExt:
InMcastPkts: 49
OutMcastPkts: 39
InBcastPkts: 7
OutBcastPkts: 7
InOctets: 1051999
OutOctets: 43587
InMcastOctets: 4113
OutMcastOctets: 3817
InBcastOctets: 328
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4600000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 4000 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f4680000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4700000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller [8086:27d8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f4780000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 000000009f800000-000000009f9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4000000-f40fffff
Prefetchable memory behind bridge: 000000009fa00000-000000009fbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 4020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f4784000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f4200000-f45fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 40a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family)
SATA Controller [AHCI mode] [8086:27c5] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 13f0 [size=8]
Region 1: I/O ports at 15f4 [size=4]
Region 2: I/O ports at 1370 [size=8]
Region 3: I/O ports at 1574 [size=4]
Region 4: I/O ports at 40d0 [size=16]
Region 5: Memory at f4785000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller
[104c:8039]
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: a0000000-a3ffffff (prefetchable)
Memory window 1: a4000000-a7ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4201000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
02:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard
Compliant SD Host Controller [104c:803c]
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f4202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore
based SmartCard controller [104c:803d]
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4203000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f4204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5753M
Gigabit Ethernet PCI Express [14e4:16fd] (rev 21)
Subsystem: Hewlett-Packard Company Device [103c:30b1]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Hewlett-Packard Company PRO/Wireless 3945ABG [Golan] Network
Connection [103c:135c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
** USB devices:
Bus 002 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u3
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20130623223826.3372.15005.reportbug@plas
