--- Begin Message ---
Package: linux-2.6
Version: 2.6.38-2
Severity: normal
Tags: sid
Usually as a last resort removing the pc speaker modules pcspkr and
snd_pscp effectively disables the error beep.
Not with this kernel.
In the according directories I removed `pcspkr.ko` and `snd_pcsp.ko`,
then executed `depmod -a`, then built initird with:
update-initramfs -u -k all.
Nevertheless the beep on error is still there...
-- Package-specific info:
** Version:
Linux version 2.6.38-2-686-bigmem (Debian 2.6.38-2) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 18:09:13 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-686-bigmem root=/dev/mapper/argon-root ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 14.002820] ext3_orphan_cleanup: deleting unreferenced inode 26983
[ 14.002840] ext3_orphan_cleanup: deleting unreferenced inode 26982
[ 14.002846] ext3_orphan_cleanup: deleting unreferenced inode 26981
[ 14.002859] ext3_orphan_cleanup: deleting unreferenced inode 26980
[ 14.002867] EXT3-fs (dm-1): 4 orphan inodes deleted
[ 14.002869] EXT3-fs (dm-1): recovery complete
[ 14.019147] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 15.783843] udev[387]: starting version 166
[ 16.117114] ACPI: acpi_idle registered with cpuidle
[ 16.119366] Monitor-Mwait will be used to enter C-1 state
[ 16.119397] Monitor-Mwait will be used to enter C-2 state
[ 16.119402] Marking TSC unstable due to TSC halts in idle
[ 16.120636] Switching to clocksource hpet
[ 16.367628] input: Ideapad extra buttons as
/devices/platform/ideapad/input/input4
[ 16.371209] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 16.396031] ACPI: Lid Switch [LID0]
[ 16.396107] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 16.396168] ACPI: Power Button [PWRB]
[ 16.396231] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 16.396269] ACPI: Sleep Button [SLPB]
[ 16.396339] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 16.396374] ACPI: Power Button [PWRF]
[ 16.721254] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ
19
[ 16.721260] ACPI: resource 0000:00:1f.3 [io 0x1c00-0x1c1f] conflicts with
ACPI region SMBI [io 0x1c00-0x1c0f]
[ 16.721263] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 16.807884] [drm] Initialized drm 1.1.0 20060810
[ 16.874109] ACPI: AC Adapter [ACAD] (on-line)
[ 17.382353] Linux video capture interface: v2.00
[ 17.463368] ACPI: Battery Slot [BAT1] (battery present)
[ 17.504494] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (064e:a127)
[ 17.547767] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9
[ 17.547845] usbcore: registered new interface driver uvcvideo
[ 17.547847] USB Video Class driver (v1.0.0)
[ 17.600722] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
[ 17.664668] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input11
[ 17.734412] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.734417] i915 0000:00:02.0: setting latency timer to 64
[ 17.773100] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 17.773106] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.773108] [drm] Driver supports precise vblank timestamp query.
[ 17.857757] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.858085] fixme: max PWM is zero.
[ 17.972152] Console: switching to colour frame buffer device 170x48
[ 17.976165] fb0: inteldrmfb frame buffer device
[ 17.976166] drm: registered panic notifier
[ 17.979330] acpi device:08: registered as cooling_device2
[ 17.979598] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 17.979713] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.979960] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.980068] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.980073] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.980088] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 17.980165] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 17.980197] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.175066] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input13
[ 18.176621] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 18.176715] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 18.176793] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 19.107854] EXT3-fs (dm-1): using internal journal
[ 19.327407] loop: module loaded
[ 19.819845] Adding 5963772k swap on /dev/mapper/argon-swap_1. Priority:-1
extents:1 across:5963772k
[ 21.664411] EXT3-fs: barriers not enabled
[ 21.803401] kjournald starting. Commit interval 5 seconds
[ 21.803482] EXT3-fs (dm-3): warning: maximal mount count reached, running
e2fsck is recommended
[ 21.814586] EXT3-fs (dm-3): using internal journal
[ 21.814588] EXT3-fs (dm-3): recovery complete
[ 21.815167] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 22.622147] fuse init (API version 7.16)
[ 24.317316] apm: BIOS not found.
[ 24.352594] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input17
[ 25.547729] lp: driver loaded but no devices found
[ 25.562750] ppdev: user-space parallel port driver
[ 28.419430] tg3 0000:07:00.0: irq 48 for MSI/MSI-X
[ 28.452417] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.739627] sshd (1606): /proc/1606/oom_adj is deprecated, please use
/proc/1606/oom_score_adj instead.
[ 28.961474] Disabling lock debugging due to kernel taint
[ 28.989790] vboxdrv: Found 2 processor cores.
[ 28.990232] vboxdrv: fAsync=0 offMin=0x16f offMax=0x61d
[ 28.990281] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 28.990283] vboxdrv: Successfully loaded version 4.0.4 (interface
0x00160000).
[ 29.571003] CPUFREQ: Per core ondemand sysfs interface is deprecated -
ignore_nice_load
[ 31.100870] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 31.100925] ehci_hcd 0000:00:1a.7: PME# enabled
[ 31.117107] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 31.332080] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xf4905800-0xf4905bff]
(PCI address [0xf4905800-0xf4905bff])
[ 31.332104] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was
0x300, writing 0x307)
[ 31.332135] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[ 31.332179] ehci_hcd 0000:00:1a.7: PME# disabled
[ 31.332194] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 31.332204] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 31.522093] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 31.522105] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 43.020105] tg3 0000:07:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 43.020112] tg3 0000:07:00.0: eth0: Flow control is on for TX and on for RX
[ 43.020359] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.016046] eth0: no IPv6 routers present
[ 257.452061] CE: hpet increased min_delta_ns to 20113 nsec
[ 816.937186] mail-notificati[2478]: segfault at 4d0 ip b77391d6 sp bfadf830
error 4 in libX11.so.6.3.0[b7716000+11c000]
[ 922.943465] warning: `VirtualBox' uses 32-bit capabilities (legacy support
in use)
[ 930.475228] device eth0 entered promiscuous mode
** Model information
not available
** Loaded modules:
Module Size Used by
vboxnetadp 13120 0
vboxnetflt 23683 2
vboxdrv 147237 3 vboxnetadp,vboxnetflt
cpufreq_userspace 12520 0
cpufreq_stats 12670 0
parport_pc 21895 0
ppdev 12621 0
lp 12858 0
parport 27018 3 parport_pc,ppdev,lp
cpufreq_conservative 13598 0
cpufreq_powersave 12422 0
acpi_cpufreq 12737 1
mperf 12387 1 acpi_cpufreq
uinput 12984 1
fuse 55640 1
ext2 53488 1
loop 17805 0
snd_hda_codec_conexant 35784 1
snd_hda_intel 21529 2
snd_hda_codec 57563 2 snd_hda_codec_conexant,snd_hda_intel
i915 276436 2
snd_hwdep 12906 1 snd_hda_codec
snd_pcm 52774 2 snd_hda_intel,snd_hda_codec
drm_kms_helper 26501 1 i915
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
uvcvideo 52490 0
joydev 16906 0
videodev 48418 1 uvcvideo
drm 128416 3 i915,drm_kms_helper
i2c_i801 12670 0
snd_seq_device 12995 1 snd_seq
battery 12926 0
ac 12552 0
i2c_algo_bit 12706 1 i915
i2c_core 18989 6
i915,drm_kms_helper,videodev,drm,i2c_i801,i2c_algo_bit
snd 38153 12
snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 12878 1 snd
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
power_supply 13283 2 battery,ac
psmouse 45863 0
button 12866 1 i915
ideapad_laptop 12772 0
tpm_tis 12949 0
tpm 17454 1 tpm_tis
tpm_bios 12799 1 tpm
evdev 13084 35
sparse_keymap 12680 1 ideapad_laptop
rfkill 18510 1 ideapad_laptop
video 17345 1 i915
processor 26983 3 acpi_cpufreq
serio_raw 12758 0
ext3 98001 2
jbd 40818 1 ext3
mbcache 12810 2 ext2,ext3
sha256_generic 16709 2
aes_i586 16608 4
aes_generic 37066 1 aes_i586
cbc 12659 2
dm_crypt 17809 1
dm_mod 56394 12 dm_crypt
sg 21385 0
hid_cherry 12447 0
usbhid 35168 0
hid 59736 2 hid_cherry,usbhid
sd_mod 34941 3
sr_mod 17418 0
crc_t10dif 12332 1 sd_mod
cdrom 34631 1 sr_mod
uhci_hcd 21850 0
ahci 20897 2
libahci 22161 1 ahci
libata 131904 2 ahci,libahci
ehci_hcd 34919 0
tg3 103807 0
scsi_mod 134369 4 sg,sd_mod,sr_mod,libata
usbcore 99058 5 uvcvideo,usbhid,uhci_hcd,ehci_hcd
thermal 13058 0
libphy 18279 1 tg3
thermal_sys 17667 3 video,processor,thermal
nls_base 12649 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 09)
Subsystem: Lenovo Device [17aa:3a00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:3a02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 09)
Subsystem: Lenovo Device [17aa:3a02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a09]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a0a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a0b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3a0c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: Memory at f4905800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:3a0d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f4700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0400000-c05fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f4500000-f45fffff
Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f3ffffff
Prefetchable memory behind bridge: 00000000f6000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f4600000-f46fffff
Prefetchable memory behind bridge: 00000000c0a00000-00000000c0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a14]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a15]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3a16]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3a17]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4905c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 03)
Subsystem: Lenovo Device [17aa:3a19]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:3a1a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f4905000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:3a1d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0c00000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9
Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Lenovo Device [17aa:3a1f]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f4704000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g
LP-PHY [14e4:4315] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:04b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f4500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Lenovo IdeaPad S10e [17aa:3a23]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f4600000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 064e:a127 Suyin Corp.
Bus 006 Device 002: ID 04d9:1135 Holtek Semiconductor, Inc.
Bus 006 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (1001, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-2-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-686-bigmem recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.38-2-686-bigmem suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-686-bigmem/postinst/ignoring-do-bootloader-2.6.38-2-686-bigmem:
linux-image-2.6.38-2-686-bigmem/postinst/depmod-error-initrd-2.6.38-2-686-bigmem:
false
* linux-image-2.6.38-2-686-bigmem/postinst/missing-firmware-2.6.38-2-686-bigmem:
linux-image-2.6.38-2-686-bigmem/prerm/removing-running-kernel-2.6.38-2-686-bigmem:
true
-- debsums errors found:
debsums: missing file
/lib/modules/2.6.38-2-686-bigmem/kernel/drivers/input/misc/pcspkr.ko (from
linux-image-2.6.38-2-686-bigmem package)
debsums: missing file
/lib/modules/2.6.38-2-686-bigmem/kernel/sound/drivers/pcsp/snd-pcsp.ko (from
linux-image-2.6.38-2-686-bigmem package)
--- End Message ---
