Package: src:linux
Version: 3.9.6-1
Severity: normal
File: linux-image-3.9
The system started to lock up recently with kernels like 3.7
There seems to be no memory or disk problem and it is possible to log
into the machine remotely. No updates on screen and no keyboard input
possible. So looks like X went south. No errors logged.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
initrd=/boot/initrd.img-3.9-1-amd64
root=UUID=3b8f6a64-5899-462a-aec0-6ddefd878ecf ro quiet fbcon=rotate:3
elevator=deadline console=tty0 console=ttyS0,115200n8
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[86653.264558] awimage[4496]: segfault at f75ca000 ip 000000000804e30c sp
00000000ffbd2748 error 7 in awimage[8048000+8000]
[86714.918743] awimage[4544]: segfault at f75b0000 ip 000000000804e2a3 sp
00000000ffa99958 error 7 in awimage[8048000+7000]
[86735.302246] awimage[4546]: segfault at f75fa000 ip 000000000804e2a3 sp
00000000ffb67438 error 7 in awimage[8048000+7000]
[87279.623603] awimage[5240]: segfault at 2a922000 ip 000000000804e2a3 sp
00000000ffa20f48 error 7 in awimage[8048000+7000]
[88410.636432] traps: midori[5405] general protection ip:7f7fb1eb4380
sp:7fffbaf643c8 error:0 in libwebkitgtk-1.0.so.0.13.2[7f7fb1ade000+1612000]
[92160.081339] awimage[7402]: segfault at 7d260af79008 ip 0000000000407eb0 sp
00007fff68c1d818 error 7 in awimage[400000+a000]
[93568.209953] sd 9:0:0:3: [sdd] 7744512 512-byte logical blocks: (3.96 GB/3.69
GiB)
[93568.219068] sd 9:0:0:3: [sdd] No Caching mode page present
[93568.224547] sd 9:0:0:3: [sdd] Assuming drive cache: write through
[93568.248572] sd 9:0:0:3: [sdd] No Caching mode page present
[93568.254046] sd 9:0:0:3: [sdd] Assuming drive cache: write through
[93568.274585] sdd: sdd1
[93789.249247] sd 9:0:0:3: [sdd] No Caching mode page present
[93789.254739] sd 9:0:0:3: [sdd] Assuming drive cache: write through
[93789.267242] sdd: unknown partition table
[93831.369126] sd 9:0:0:3: [sdd] No Caching mode page present
[93831.374611] sd 9:0:0:3: [sdd] Assuming drive cache: write through
[93831.395872] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 >
[95039.017271] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[95089.842729] EXT4-fs (sdd2): warning: mounting unchecked fs, running e2fsck
is recommended
[95089.845917] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts:
(null)
[95119.553615] EXT4-fs (sdd3): warning: mounting unchecked fs, running e2fsck
is recommended
[95119.557022] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts:
(null)
[95354.095404] EXT4-fs (sdd7): warning: mounting unchecked fs, running e2fsck
is recommended
[95354.098590] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts:
(null)
[95467.030048] sdd: detected capacity change from 3965190144 to 0
[156613.888043] usb 3-2: USB disconnect, device number 14
[156613.888048] usb 3-2.1: USB disconnect, device number 15
[156613.890733] wacom 3-2.3:1.1: wacom_sys_irq - usb_submit_urb failed with
result -19
[156613.894724] wacom 3-2.3:1.0: wacom_sys_irq - usb_submit_urb failed with
result -19
[156613.952039] usb 3-2.2: USB disconnect, device number 16
[156613.960450] usb 3-2.3: USB disconnect, device number 17
[156687.792027] usb 3-2: new full-speed USB device number 18 using uhci_hcd
[156687.973042] usb 3-2: New USB device found, idVendor=04b3, idProduct=301a
[156687.973047] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156687.973050] usb 3-2: Product: USB 1.1 2port downstream low power hub
[156687.973053] usb 3-2: Manufacturer: Lite-On Technology
[156687.981061] hub 3-2:1.0: USB hub found
[156687.982042] hub 3-2:1.0: 3 ports detected
[156688.261041] usb 3-2.1: new full-speed USB device number 19 using uhci_hcd
[156688.409039] usb 3-2.1: New USB device found, idVendor=04b3, idProduct=301b
[156688.409044] usb 3-2.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[156688.409047] usb 3-2.1: Product: USB Productivity Option Keyboard( has the
hub in # 1 )
[156688.409050] usb 3-2.1: Manufacturer: Lite-On Technology
[156688.419364] input: Lite-On Technology USB Productivity Option Keyboard( has
the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input31
[156688.419497] hid-generic 0003:04B3:301B.000D: input,hidraw0: USB HID v1.10
Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 )] on usb-0000:00:1a.0-2.1/input0
[156688.424113] input: Lite-On Technology USB Productivity Option Keyboard( has
the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input32
[156688.424239] hid-generic 0003:04B3:301B.000E: input,hidraw1: USB HID v1.10
Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1
)] on usb-0000:00:1a.0-2.1/input1
[156688.497042] usb 3-2.2: new low-speed USB device number 20 using uhci_hcd
[156688.635039] usb 3-2.2: New USB device found, idVendor=046d, idProduct=c063
[156688.635044] usb 3-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156688.635047] usb 3-2.2: Product: DELL USB Laser Mouse
[156688.635050] usb 3-2.2: Manufacturer: DELL
[156688.653339] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input33
[156688.653500] hid-generic 0003:046D:C063.000F: input,hidraw2: USB HID v1.10
Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.0-2.2/input0
[156688.857043] usb 3-2.3: new full-speed USB device number 21 using uhci_hcd
[156688.987042] usb 3-2.3: New USB device found, idVendor=056a, idProduct=00d1
[156688.987047] usb 3-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156688.987050] usb 3-2.3: Product: CTH-460
[156688.987053] usb 3-2.3: Manufacturer: Wacom Co.,Ltd.
[156688.995110] input: Wacom Bamboo 2FG 4x5 Pen as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input34
[156688.999094] input: Wacom Bamboo 2FG 4x5 Finger as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input35
[156702.176043] usb 3-2: USB disconnect, device number 18
[156702.176049] usb 3-2.1: USB disconnect, device number 19
[156702.216047] usb 3-2.2: USB disconnect, device number 20
[156702.224507] usb 3-2.3: USB disconnect, device number 21
[156859.340019] usb 3-2: new full-speed USB device number 22 using uhci_hcd
[156859.725039] usb 3-2: New USB device found, idVendor=04b3, idProduct=301a
[156859.725043] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156859.725047] usb 3-2: Product: USB 1.1 2port downstream low power hub
[156859.725050] usb 3-2: Manufacturer: Lite-On Technology
[156859.733059] hub 3-2:1.0: USB hub found
[156859.734036] hub 3-2:1.0: 3 ports detected
[156860.013038] usb 3-2.1: new full-speed USB device number 23 using uhci_hcd
[156860.161040] usb 3-2.1: New USB device found, idVendor=04b3, idProduct=301b
[156860.161045] usb 3-2.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[156860.161049] usb 3-2.1: Product: USB Productivity Option Keyboard( has the
hub in # 1 )
[156860.161052] usb 3-2.1: Manufacturer: Lite-On Technology
[156860.171363] input: Lite-On Technology USB Productivity Option Keyboard( has
the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input36
[156860.171494] hid-generic 0003:04B3:301B.0010: input,hidraw0: USB HID v1.10
Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 )] on usb-0000:00:1a.0-2.1/input0
[156860.176113] input: Lite-On Technology USB Productivity Option Keyboard( has
the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input37
[156860.176243] hid-generic 0003:04B3:301B.0011: input,hidraw1: USB HID v1.10
Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1
)] on usb-0000:00:1a.0-2.1/input1
[156860.249046] usb 3-2.2: new low-speed USB device number 24 using uhci_hcd
[156860.387038] usb 3-2.2: New USB device found, idVendor=046d, idProduct=c063
[156860.387042] usb 3-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156860.387045] usb 3-2.2: Product: DELL USB Laser Mouse
[156860.387048] usb 3-2.2: Manufacturer: DELL
[156860.405328] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input38
[156860.405506] hid-generic 0003:046D:C063.0012: input,hidraw2: USB HID v1.10
Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.0-2.2/input0
[156860.609041] usb 3-2.3: new full-speed USB device number 25 using uhci_hcd
[156860.739036] usb 3-2.3: New USB device found, idVendor=056a, idProduct=00d1
[156860.739040] usb 3-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[156860.739043] usb 3-2.3: Product: CTH-460
[156860.739046] usb 3-2.3: Manufacturer: Wacom Co.,Ltd.
[156860.747096] input: Wacom Bamboo 2FG 4x5 Pen as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input39
[156860.751094] input: Wacom Bamboo 2FG 4x5 Finger as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input40
[156879.744043] usb 3-2: USB disconnect, device number 22
[156879.744048] usb 3-2.1: USB disconnect, device number 23
[156879.772060] usb 3-2.2: USB disconnect, device number 24
[156879.780369] usb 3-2.3: USB disconnect, device number 25
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 960
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0Y958C
board_version: A00
** Loaded modules:
nls_utf8
nls_cp437
vfat
fat
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
bridge
stp
llc
xt_tcpudp
xt_conntrack
xt_state
xt_dscp
xt_DSCP
xt_CLASSIFY
xt_LOG
ipt_REJECT
xt_owner
nf_conntrack_tftp
nf_nat_ftp
nf_conntrack_ftp
nf_nat_sip
nf_conntrack_sip
nf_nat_h323
nf_conntrack_h323
nf_nat_pptp
nf_nat_proto_gre
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_nat_irc
nf_conntrack_irc
iptable_filter
iptable_nat
nf_nat_ipv4
ipt_MASQUERADE
nf_nat
xt_multiport
xt_iprange
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
ip_tables
x_tables
tun
ext4
crc16
jbd2
dm_snapshot
snd_pcm_oss
snd_mixer_oss
loop
fuse
snd_hda_codec_hdmi
snd_hda_codec_analog
coretemp
kvm_intel
kvm
joydev
wacom
acpi_cpufreq
mperf
dell_wmi
sparse_keymap
evdev
iTCO_wdt
iTCO_vendor_support
dcdbas
parport_pc
parport
microcode
psmouse
pcspkr
serio_raw
snd_hda_intel
wmi
snd_hda_codec
button
snd_hwdep
snd_pcm
i2c_i801
snd_page_alloc
processor
snd_timer
snd
soundcore
thermal_sys
lpc_ich
mei
mfd_core
ext3
mbcache
jbd
btrfs
xor
zlib_deflate
raid6_pq
crc32c
libcrc32c
dm_mod
sg
sd_mod
crc_t10dif
hid_generic
usbhid
hid
usb_storage
radeon
i2c_algo_bit
drm_kms_helper
ttm
drm
i2c_core
ahci
libahci
e1000e
ptp
pps_core
sata_sil24
uhci_hcd
ata_generic
ehci_pci
ehci_hcd
usbcore
usb_common
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset
HECI Controller [8086:2e14] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f0400800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER
Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT
Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at febd8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at febd9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at febda000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at febdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family)
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 50
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at f0400000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febdb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00
[VGA controller])
Subsystem: PC Partner Limited Device [174b:e164]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at dc00 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI
Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: PC Partner Limited Device [174b:aa68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 53
Region 0: Memory at fe9dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3531
[SATALink/SATARaid] Serial ATA Controller [1095:3531] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA
Controller [1095:3531]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe7fd000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at fe7fe000 (64-bit, non-prefetchable) [size=8K]
Region 4: I/O ports at cc80 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
** USB devices:
Bus 002 Device 002: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader
CA200/B/S
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (910, 'testing'), (900, 'stable'), (610, 'oldstable'), (410,
'unstable'), (200, 'experimental'), (150, 'precise-updates'), (150,
'precise-security'), (150, 'precise')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u3
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130621072510.23111.1827.report...@optiplex960.ruk.cuni.cz
