--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-30
Severity: normal
Hello,
I'm using MSA110P 3G modem with usb-modeswitch (if I don't, the devices are not
created). So I have 4 devices, as you can see in kernel.log
The only configuration I've made in usb-modeswitch is:
- Edited /etc/usb_modeswitch.d/19d2\:2000, adding 0091 to
'TargetProductList
I'm also using wvdial to connect.
The problem, as you can see in kernel.log, is that after some time (minutes or
hours), I receive ten "option: option_instat_callback: error -84" and my
devices are disconnected.
Thanks in advance.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=dcf7ec90-4441-4df9-a850-6ca0ffedf17d ro quiet
** Not tainted
** Kernel log:
[ 11.391409] usbcore: registered new interface driver usbserial_generic
[ 11.391418] usbserial: USB Serial Driver core
[ 11.434581] [drm] nouveau 0000:01:00.0: No TV encoders found.
[ 11.441675] [TTM] Zone kernel: Available graphics memory: 387228 kiB.
[ 11.441705] [drm] nouveau 0000:01:00.0: 16 MiB VRAM
[ 11.441849] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 11.441879] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 11.441951] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 11.441959] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 11.442266] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 11.445552] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 0
[ 11.445640] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 11.474397] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 11.475199] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 11.590644] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x45000, bo
ee9fec00
[ 11.726157] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 11.726171] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0
using output @
[ 11.729811] Console: switching to colour frame buffer device 160x64
[ 11.735293] fb0: nouveaufb frame buffer device
[ 11.735298] registered panic notifier
[ 11.735313] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on
minor 0
[ 12.028327] USB Serial support registered for GSM modem (1-port)
[ 12.030144] usbcore: registered new interface driver option
[ 12.030153] option: v0.7.2:USB Driver for GSM modems
[ 12.095555] option 1-2:1.0: GSM modem (1-port) converter detected
[ 12.098090] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 12.098277] option 1-2:1.1: GSM modem (1-port) converter detected
[ 12.101049] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 12.101236] option 1-2:1.2: GSM modem (1-port) converter detected
[ 12.103653] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 12.103866] option 1-2:1.4: GSM modem (1-port) converter detected
[ 12.107096] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 12.381050] ENS1371 0000:00:04.0: PCI INT A -> Link[LNKC] -> GSI 10 (level,
low) -> IRQ 10
[ 14.887102] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 15.444543] EXT3 FS on sda1, internal journal
[ 15.927327] loop: module loaded
[ 16.904924] fuse init (API version 7.13)
[ 17.318811] kjournald starting. Commit interval 5 seconds
[ 17.319343] EXT3 FS on sda3, internal journal
[ 17.319356] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.176548] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 29.364101] eth0: no IPv6 routers present
[ 43.194525] bttv0: PLL can sleep, using XTAL (28636363).
[ 57.845188] Bluetooth: Core ver 2.15
[ 57.845408] NET: Registered protocol family 31
[ 57.845413] Bluetooth: HCI device and connection manager initialized
[ 57.845422] Bluetooth: HCI socket layer initialized
[ 59.135389] Bluetooth: L2CAP ver 2.14
[ 59.135399] Bluetooth: L2CAP socket layer initialized
[ 59.474393] Bluetooth: RFCOMM TTY layer initialized
[ 59.474409] Bluetooth: RFCOMM socket layer initialized
[ 59.474414] Bluetooth: RFCOMM ver 1.11
[ 60.332696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 60.332707] Bluetooth: BNEP filters: protocol multicast
[ 60.461749] Bridge firewalling registered
[ 62.081426] Bluetooth: SCO (Voice Link) ver 0.6
[ 62.081435] Bluetooth: SCO socket layer initialized
[ 78.808213] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 78.810496] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 87.544782] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 88.078861] nf_conntrack version 0.5.0 (12100 buckets, 48400 max)
[ 88.083273] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 88.083286] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 88.083292] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 91.261014] PPP generic driver version 2.4.2
[ 92.054151] PPP BSD Compression module registered
[ 92.427962] PPP Deflate Compression module registered
[ 253.473942] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
[ 2072.008189] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder
(output 0)
[105852.835691] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[107706.752992] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder
(output 0)
[191444.509157] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[193544.408185] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder
(output 0)
[222393.073561] option: option_instat_callback: error -84
[222393.085555] option: option_instat_callback: error -84
[222393.097525] option: option_instat_callback: error -84
[222393.109554] option: option_instat_callback: error -84
[222393.121538] option: option_instat_callback: error -84
[222393.133547] option: option_instat_callback: error -84
[222393.145513] option: option_instat_callback: error -84
[222393.157525] option: option_instat_callback: error -84
[222393.169525] option: option_instat_callback: error -84
[222393.176110] usb 1-2: USB disconnect, address 2
[222393.181527] option: option_instat_callback: error -84
[222393.181940] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
[222393.182040] option 1-2:1.0: device disconnected
[222393.182422] option1 ttyUSB1: GSM modem (1-port) converter now disconnected
from ttyUSB1
[222393.182464] option 1-2:1.1: device disconnected
[222393.182671] option1 ttyUSB2: GSM modem (1-port) converter now disconnected
from ttyUSB2
[222393.182710] option 1-2:1.2: device disconnected
[222393.193738] option1 ttyUSB3: GSM modem (1-port) converter now disconnected
from ttyUSB3
[222393.193778] option 1-2:1.4: device disconnected
[222393.912183] usb 1-2: new full speed USB device using uhci_hcd and address 3
[222394.065442] usb 1-2: New USB device found, idVendor=19d2, idProduct=0018
[222394.065455] usb 1-2: New USB device strings: Mfr=3, Product=2,
SerialNumber=0
[222394.065463] usb 1-2: Product: ZTE WCDMA Technologies MSM
[222394.065470] usb 1-2: Manufacturer: ZTE, Incorporated
[222394.067319] usb 1-2: configuration #1 chosen from 1 choice
[222394.074259] option 1-2:1.0: GSM modem (1-port) converter detected
[222394.074927] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
** Model information
not available
** Loaded modules:
Module Size Used by
ppp_deflate 2790 0
zlib_deflate 15822 1 ppp_deflate
bsd_comp 4120 0
ppp_async 5305 0
crc_ccitt 1039 1 ppp_async
ppp_generic 16359 3 ppp_deflate,bsd_comp,ppp_async
xt_tcpudp 1743 2
slhc 3691 1 ppp_generic
xt_limit 1088 3
xt_multiport 1775 3
xt_state 927 1
iptable_mangle 2325 0
iptable_nat 3551 0
nf_nat 10568 1 iptable_nat
nf_conntrack_ipv4 7597 4 iptable_nat,nf_nat
nf_conntrack 38075 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
iptable_filter 1790 1
ip_tables 7690 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 8327 6
xt_tcpudp,xt_limit,xt_multiport,xt_state,iptable_nat,ip_tables
sco 5857 0
bridge 33019 0
stp 996 1 bridge
bnep 7444 0
rfcomm 25171 0
l2cap 21705 4 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 4 sco,bnep,rfcomm,l2cap
speedstep_lib 2468 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 0
fuse 44033 1
firewire_sbp2 9647 0
loop 9765 0
snd_ens1371 13570 0
gameport 6061 1 snd_ens1371
snd_seq_midi 3576 0
snd_seq_midi_event 3684 1 snd_seq_midi
snd_rawmidi 12513 2 snd_ens1371,snd_seq_midi
option 12438 0
usb_wwan 6464 1 option
snd_ac97_codec 79148 1 snd_ens1371
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 2 snd_ens1371,snd_ac97_codec
usbserial 21847 2 option,usb_wwan
nouveau 314892 1
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
bttv 88173 1
ttm 33386 1 nouveau
drm_kms_helper 18309 1 nouveau
v4l2_common 9820 1 bttv
drm 112088 3 nouveau,ttm,drm_kms_helper
rndis_wlan 15988 0
snd_timer 12258 2 snd_pcm,snd_seq
videodev 25545 3 bttv,v4l2_common
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 87661 1 rndis_wlan
v4l1_compat 10250 1 videodev
rfkill 10264 2 bluetooth,cfg80211
rndis_host 4359 1 rndis_wlan
ir_common 22187 1 bttv
shpchp 21220 0
i2c_algo_bit 3497 2 nouveau,bttv
cdc_phonet 3118 0
cdc_ether 2633 1 rndis_host
snd 34375 7
snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
pci_hotplug 18065 1 shpchp
via686a 7301 0
videobuf_dma_sg 7203 1 bttv
i2c_viapro 4419 0
videobuf_core 10476 2 bttv,videobuf_dma_sg
btcx_risc 2499 1 bttv
tveeprom 9393 1 bttv
soundcore 3450 1 snd
joydev 6739 0
phonet 12640 1 cdc_phonet
usbnet 9527 3 rndis_wlan,rndis_host,cdc_ether
cdc_acm 12498 0
parport_pc 15799 0
i2c_core 12696 9
nouveau,bttv,drm_kms_helper,v4l2_common,drm,videodev,i2c_algo_bit,i2c_viapro,tveeprom
evdev 5609 8
parport 22554 1 parport_pc
processor 26327 1
snd_page_alloc 5045 1 snd_pcm
psmouse 44657 0
serio_raw 2916 0
pcspkr 1207 0
button 3598 1 nouveau
ext3 94212 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
usbhid 28008 0
hid 50893 1 usbhid
sg 15968 0
sd_mod 25977 4
sr_mod 10770 0
cdrom 26487 1 sr_mod
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
usb_storage 30585 0
pata_via 5701 3
firewire_ohci 16725 0
libata 115753 2 ata_generic,pata_via
thermal 9206 0
uhci_hcd 16057 0
firewire_core 31243 2 firewire_sbp2,firewire_ohci
ehci_hcd 27851 0
8139too 14949 0
floppy 40923 0
scsi_mod 101429 6
firewire_sbp2,sg,sd_mod,sr_mod,usb_storage,libata
thermal_sys 9378 2 processor,thermal
crc_itu_t 1035 1 firewire_core
usbcore 98453 14
option,usb_wwan,usbserial,rndis_wlan,rndis_host,cdc_phonet,cdc_ether,usbnet,cdc_acm,usbhid,usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
mii 2714 2 usbnet,8139too
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] [1106:0691] (rev c4)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16
Region 0: Memory at 50000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: 40000000-40ffffff
Prefetchable memory behind bridge: 42000000-43ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97]
[1274:1371] (rev 09)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
[1274:1371]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1400 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ENS1371
00:05.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video
Capture [109e:036e] (rev 11)
Subsystem: Device [aa00:1430]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 44100000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
No end tag found
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: bttv
00:05.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture
[109e:0878] (rev 11)
Subsystem: Device [aa00:1430]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 44200000 (32-bit, prefetchable) [disabled] [size=4K]
Capabilities: [44] Vital Product Data
No end tag found
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Ethernet controller [0200]: Accton Technology Corporation SMC2-1211TX
[1113:1211] (rev 10)
Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet Adapter
[1113:1211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at 44000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
00:07.0 Modem [0703]: PCTel Inc HSP MicroModem 56 [134d:7897] (rev 02) (prog-if
01 [Hayes/16450])
Subsystem: PCTel Inc Device [134d:0001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 1440 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV23 IEEE-1394
Controller [104c:8019] (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Device [0e11:b11f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 41100000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 41000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: firewire_ohci
00:14.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South]
[1106:0686] (rev 22)
Subsystem: Device [0011:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: parport_pc
00:14.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at 14c0 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:14.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 10) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1480 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:14.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 10) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 14a0 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:14.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] [10de:002d] (rev 15) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0017]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 42000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Kernel driver in use: nouveau
** USB devices:
Bus 002 Device 003: ID 10d5:5a08 Uni Class Technology Co., Ltd
Bus 002 Device 002: ID 0421:034c Nokia Mobile Phones
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 19d2:0018 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=pt_BR.UTF-8, LC_CTYPE=pt_BR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-30 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
