--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-20
Severity: normal
I'm trying to play a commercial DVD, using totem or vlc on a squeeze system.
with 2.6.32-19, i can play it successfully in both players.
when i upgrade to 2.6.32-20, totem simply crashes, while vlc can play the
audio, but no video is rendered.
The Totem crash emits these errors to ~/.xsession-errors:
The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 124 error_code 11 request_code 132 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
maybe this has to do with the recent kernel fix mentioned in
http://lwn.net/Articles/400746/ ?
Thanks for keeping the linux kernel in good shape in debian! let me know if
you need any additional information.
--dkg
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-20) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:38:27 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=b9ddc8b0-e070-43f2-83b9-b3209ae8e3c3 ro quiet
** Not tainted
** Kernel log:
[ 2.084371] ata2.00: configured for UDMA/33
[ 2.084595] ata1.00: configured for UDMA/100
[ 2.084797] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10
PQ: 0 ANSI: 5
[ 2.086333] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501
PQ: 0 ANSI: 5
[ 2.246943] ata3: SATA link down (SStatus 0 SControl 310)
[ 2.456018] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.574937] ata4: SATA link down (SStatus 0 SControl 310)
[ 2.707385] usb 2-1: New USB device found, idVendor=1241, idProduct=1603
[ 2.707391] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.707395] usb 2-1: Product: USB Keyboard
[ 2.707399] usb 2-1: Manufacturer:
[ 2.707547] usb 2-1: configuration #1 chosen from 1 choice
[ 2.796698] usbcore: registered new interface driver hiddev
[ 2.800169] [drm] Initialized drm 1.1.0 20060810
[ 2.827632] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149
GiB)
[ 2.827724] sd 0:0:0:0: [sda] Write Protect is off
[ 2.827730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.827768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.828053] sda: sda1 sda2 <
[ 2.843055] input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 2.843249] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10
Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 2.861556] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.861568] i915 0000:00:02.0: setting latency timer to 64
[ 2.865482] sda5
[ 2.869231] [drm] set up 7M of stolen space
[ 2.873665] sda6 sda7
[ 2.893714] [drm] initialized overlay support
[ 2.915646] sda8 sda9 >
[ 2.935511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.941862] input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 2.941973] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10
Device [ USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 2.942023] usbcore: registered new interface driver usbhid
[ 2.942028] usbhid: v2.6:USB HID core driver
[ 3.048057] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 3.055481] sr0: scsi3-mmc drive: 6x/48x cd/rw xa/form2 cdda tray
[ 3.055488] Uniform CD-ROM driver Revision: 3.20
[ 3.056250] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.091806] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.092299] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.237563] Console: switching to colour frame buffer device 160x64
[ 3.237588] usb 4-2: New USB device found, idVendor=05fe, idProduct=0011
[ 3.237593] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.237597] usb 4-2: Product: PS2/USB Browser Combo Mouse
[ 3.237601] usb 4-2: Manufacturer: Cypress Sem
[ 3.237796] usb 4-2: configuration #1 chosen from 1 choice
[ 3.247496] fb0: inteldrmfb frame buffer device
[ 3.247499] registered panic notifier
[ 3.247533] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.279294] input: Cypress Sem PS2/USB Browser Combo Mouse as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 3.279470] generic-usb 0003:05FE:0011.0003: input,hidraw2: USB HID v1.00
Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.2-2/input0
[ 3.746330] PM: Starting manual resume from disk
[ 3.746338] PM: Resume from partition 8:5
[ 3.746341] PM: Checking hibernation image.
[ 3.746658] PM: Error -22 checking image file
[ 3.746661] PM: Resume from disk failed.
[ 3.792943] kjournald starting. Commit interval 5 seconds
[ 3.792962] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.720111] udev: starting version 160
[ 6.309893] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.586598] processor LNXCPU:00: registered as cooling_device0
[ 6.710431] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 6.719818] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.719878] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.739546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.787289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.796126] intel_rng: FWH not detected
[ 7.023460] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 8.481983] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 8.482063] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 8.852018] intel8x0_measure_ac97_clock: measured 54800 usecs (2640 samples)
[ 8.852025] intel8x0: clocking to 48000
[ 9.587098] Adding 3405816k swap on /dev/sda5. Priority:-1 extents:1
across:3405816k
[ 9.884387] EXT3 FS on sda1, internal journal
[ 10.756637] kjournald starting. Commit interval 5 seconds
[ 10.756810] EXT3 FS on sda6, internal journal
[ 10.756819] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.109723] fuse init (API version 7.13)
[ 16.257621] e100 0000:01:07.0: firmware: requesting e100/d101m_ucode.bin
[ 16.424404] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.428291] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 16.428960] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.326171] Bluetooth: Core ver 2.15
[ 21.326289] NET: Registered protocol family 31
[ 21.326293] Bluetooth: HCI device and connection manager initialized
[ 21.326300] Bluetooth: HCI socket layer initialized
[ 21.408837] Bluetooth: L2CAP ver 2.14
[ 21.408843] Bluetooth: L2CAP socket layer initialized
[ 21.552090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.552097] Bluetooth: BNEP filters: protocol multicast
[ 21.795528] Bridge firewalling registered
[ 22.024789] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.024796] Bluetooth: SCO socket layer initialized
[ 22.604300] lp0: using parport0 (interrupt-driven).
[ 22.632529] ppdev: user-space parallel port driver
[ 23.930797] render error detected, EIR: 0x00000010
[ 23.930808] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 23.930827] render error detected, EIR: 0x00000010
[ 26.768011] eth0: no IPv6 routers present
[ 44.720781] UDF-fs: Partition marked readonly; forcing readonly mount
[ 44.739248] UDF-fs INFO UDF: Mounting volume 'BATTLESTAR_GALACTICA_25',
timestamp 2006/07/18 23:19 (1000)
** Model information
not available
** Loaded modules:
Module Size Used by
isofs 24608 0
udf 62930 1
crc_itu_t 1035 1 udf
speedstep_lib 2468 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
l2cap 21705 3 bnep
crc16 1027 1 l2cap
bluetooth 36327 5 sco,bnep,l2cap
rfkill 10264 3 bluetooth
binfmt_misc 4907 1
fuse 43758 1
snd_intel8x0 19523 1
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 11
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
i2c_i801 6462 0
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
shpchp 21220 0
rng_core 2178 0
pci_hotplug 18065 1 shpchp
parport_pc 15799 1
dcdbas 3892 0
psmouse 44657 0
parport 22554 3 ppdev,lp,parport_pc
processor 26615 0
evdev 5609 13
pcspkr 1207 0
serio_raw 2916 0
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
sg 15968 0
sr_mod 10770 1
i915 221415 2
cdrom 26487 1 sr_mod
sd_mod 25869 4
crc_t10dif 1012 1 sd_mod
drm_kms_helper 18305 1 i915
drm 112020 3 i915,drm_kms_helper
usbhid 27980 0
i2c_algo_bit 3497 1 i915
ata_generic 2019 0
hid 50645 1 usbhid
uhci_hcd 16057 0
i2c_core 12696 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
sata_via 5537 0
thermal 9206 0
e100 22317 0
video 14605 1 i915
ata_piix 17640 4
ehci_hcd 27851 0
libata 115721 3 ata_generic,sata_via,ata_piix
button 3598 1 i915
thermal_sys 9378 3 processor,thermal,video
mii 2714 1 e100
output 1204 1 video
usbcore 98386 4 usbhid,uhci_hcd,ehci_hcd
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
nls_base 4541 3 isofs,udf,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:d0:b7:b1:b6:b6 brd ff:ff:ff:ff:ff:ff
inet 192.168.13.36/24 brd 192.168.13.255 scope global eth0
inet6 fe80::2d0:b7ff:feb1:b6b6/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 2a:dd:61:05:43:b0 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 560 8 0 0 0 0 0 0 560
8 0 0 0 0 0 0
eth0: 129557 149 0 0 0 0 0 0 15017
144 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
163 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
161 incoming packets delivered
126 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
104 segments received
88 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
35 packets received
0 packets to unknown port received.
0 packet receive errors
36 packets sent
UdpLite:
TcpExt:
4 delayed acks sent
78 packet headers predicted
9 acknowledgments not containing data payload received
2 predicted acknowledgments
IpExt:
InMcastPkts: 12
OutMcastPkts: 14
InBcastPkts: 21
InOctets: 130258
OutOctets: 9904
InMcastOctets: 2503
OutMcastOctets: 2583
InBcastOctets: 3528
*** Device features:
eth0: 0x0
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface [8086:2560] (rev 01)
Subsystem: Dell Device [1028:0127]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev
01) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa00000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00
[UHCI])
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0127]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff700000-ff9fffff
Prefetchable memory behind bridge: 48000000-481fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge [8086:24c0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller
[8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 48200000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 01)
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at dc80 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: Dell Device [1028:0127]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc40 [size=64]
Region 2: Memory at ffa80400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa80000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:07.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 [8086:1229] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
with Alert On LAN* [8086:000e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ecc0 [size=64]
Region 2: Memory at ff700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at 48000000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
01:08.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID
Controller [1106:3249] (rev 50)
Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ecb0 [size=16]
Region 1: I/O ports at ec90 [size=16]
Region 2: I/O ports at ec70 [size=16]
Region 3: I/O ports at ec50 [size=16]
Region 4: I/O ports at ec20 [size=32]
Region 5: I/O ports at e800 [size=256]
Expansion ROM at 48100000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sata_via
** USB devices:
Bus 004 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1241:1603 Belkin Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs
ii linux-base 2.6.32-20 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
