--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-8
Severity: normal
While I am currently running 2.6.33-2, I also have this problem with
2.6.32-8. The issue is that when I switch from Xorg to a virtual
console, wait some seconds and then switch back to Xorg, for about 0.5
seconds I see what was on the screen before I switched away from Xorg,
then the screen flashes and gets updated by Xorg. Usually when it gets
updated the screensaver has kicked in. I would expect that when
switching back to Xorg I'd see the screensaver instead of a flash of my
desktop. I also wonder if this could be a minor information disclosure
security issue. As you can see below, I have an i915-based Intel GPU,
which defaults to using KMS. I didn't have this issue before i915 was
switched to using KMS by default.
-- Package-specific info:
** Version:
Linux version 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.2) (m...@debian.org)
(gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Sun Feb 28 18:30:42 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.33-2-amd64 root=/dev/mapper/chianamo-root ro quiet
loglevel=0
** Not tainted
** Kernel log:
[ 35.341989] udev: starting version 151
[ 36.325795] ACPI: WMI: Mapper loaded
[ 36.341383] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 36.540780] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 36.577084] ACPI: SSDT 000000005f6d4134 00244 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 36.577555] ACPI: SSDT 000000005f6d3ee9 001C6 (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 36.578516] ACPI: SSDT 000000005f6d4378 000C4 (v01 PmRef Cpu1Ist 00003000
INTL 20050624)
[ 36.578929] ACPI: SSDT 000000005f6d40af 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20050624)
[ 36.620815] ACPI: Battery Slot [BAT0] (battery present)
[ 36.626575] ACPI: AC Adapter [AC] (on-line)
[ 37.225503] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps:
0xa04713/0x200000
[ 37.261157] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input10
[ 37.379467] cfg80211: Using static regulatory domain info
[ 37.379470] cfg80211: Regulatory domain: 00
[ 37.379473] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 37.379476] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 37.379480] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 37.379483] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 37.379486] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 37.379489] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 37.379900] cfg80211: Calling CRDA to update world regulatory domain
[ 37.380702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 37.381747] leds_ss4200: no LED devices found
[ 38.165282] intel_rng: FWH not detected
[ 39.058204] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection
driver for Linux, 2.6.33-2-amd64-ks
[ 39.058208] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 39.058332] iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 39.058348] iwl3945 0000:0b:00.0: setting latency timer to 64
[ 39.112192] iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 4 802.11a
channels
[ 39.112197] iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 39.112314] alloc irq_desc for 26 on node -1
[ 39.112317] alloc kstat_irqs on node -1
[ 39.112353] iwl3945 0000:0b:00.0: irq 26 for MSI/MSI-X
[ 39.612674] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 39.751273] Bluetooth: Core ver 2.15
[ 39.751343] NET: Registered protocol family 31
[ 39.751345] Bluetooth: HCI device and connection manager initialized
[ 39.751349] Bluetooth: HCI socket layer initialized
[ 40.332578] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 40.332718] usbcore: registered new interface driver btusb
[ 40.333302] usbcore: registered new interface driver cdc_ether
[ 40.637584] rndis_host 1-3:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47
[ 40.654363] eth1: register 'rndis_host' at usb-0000:00:1d.7-3, RNDIS device,
80:00:60:0f:e8:00
[ 40.654400] usbcore: registered new interface driver rndis_host
[ 40.840238] usbcore: registered new interface driver rndis_wlan
[ 41.239498] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 41.239585] alloc irq_desc for 27 on node -1
[ 41.239588] alloc kstat_irqs on node -1
[ 41.239604] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X
[ 41.239644] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 41.696494] input: HDA Intel Mic at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 41.696606] input: HDA Intel HP Out at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 42.761426] cfg80211: World regulatory domain updated:
[ 42.761430] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 42.761434] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 42.761437] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 42.761440] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 42.761444] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 42.761447] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 44.295953] EXT3-fs (dm-1): using internal journal
[ 44.750644] loop: module loaded
[ 46.497344] Adding 4607992k swap on /dev/mapper/chianamo-swap. Priority:-1
extents:1 across:4607992k
[ 55.063348] fuse init (API version 7.13)
[ 56.884823] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 85.467832] Bluetooth: L2CAP ver 2.14
[ 85.467838] Bluetooth: L2CAP socket layer initialized
[ 85.560643] Bluetooth: RFCOMM TTY layer initialized
[ 85.560650] Bluetooth: RFCOMM socket layer initialized
[ 85.560655] Bluetooth: RFCOMM ver 1.11
[ 85.668888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 85.668895] Bluetooth: BNEP filters: protocol multicast
[ 85.937013] Bridge firewalling registered
[ 86.099992] Bluetooth: SCO (Voice Link) ver 0.6
[ 86.099998] Bluetooth: SCO socket layer initialized
[ 91.414318] iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 91.742964] iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9
[ 91.822221] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 91.917696] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 94.805250] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 94.805258] b44: eth0: Flow control is off for TX and off for RX.
[ 94.805977] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 101.961073] eth1: no IPv6 routers present
** Model information
sys_vendor: Dell Inc.
product_name: MM061
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A14
board_vendor: Dell Inc.
board_name: 0KD882
board_version:
** Loaded modules:
Module Size Used by
sco 7257 2
bridge 39813 0
stp 1440 1 bridge
bnep 9722 2
rfcomm 29762 4
l2cap 25274 16 bnep,rfcomm
crc16 1319 1 l2cap
acpi_cpufreq 5787 0
cpufreq_conservative 7910 0
cpufreq_stats 2659 0
cpufreq_userspace 2024 0
cpufreq_powersave 902 0
uinput 6687 1
fuse 50478 3
ext2 53966 1
loop 11902 0
snd_hda_codec_idt 43268 1
snd_hda_intel 20179 5
snd_hda_codec 57782 2 snd_hda_codec_idt,snd_hda_intel
rndis_wlan 18502 0
snd_hwdep 5428 1 snd_hda_codec
rndis_host 5235 1 rndis_wlan
btusb 9785 2
cdc_ether 3642 1 rndis_host
snd_pcm_oss 32790 0
usbnet 13073 3 rndis_wlan,rndis_host,cdc_ether
snd_mixer_oss 12654 1 snd_pcm_oss
snd_pcm 61254 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4432 0
bluetooth 42103 9 sco,bnep,rfcomm,l2cap,btusb
arc4 1274 2
snd_rawmidi 15810 1 snd_seq_midi
ecb 1841 2
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 43279 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15749 2 snd_pcm,snd_seq
iwl3945 52987 0
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
iwlcore 81927 1 iwl3945
snd 47090 20
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rng_core 3158 0
soundcore 4822 1 snd
mac80211 140504 2 iwl3945,iwlcore
snd_page_alloc 6313 2 snd_hda_intel,snd_pcm
joydev 8546 0
i2c_i801 7814 0
cfg80211 105832 4 rndis_wlan,iwl3945,iwlcore,mac80211
dell_laptop 2065 0
rfkill 13164 4 bluetooth,cfg80211,dell_laptop
tpm_tis 7336 0
ac 2192 0
tpm 9933 1 tpm_tis
psmouse 45587 0
battery 4998 0
processor 29489 3 acpi_cpufreq
dcdbas 5080 1 dell_laptop
tpm_bios 4521 1 tpm
dell_wmi 2587 0
wmi 5461 1 dell_wmi
serio_raw 3960 0
evdev 7384 29
ext3 107181 1
jbd 37789 1 ext3
mbcache 5050 2 ext2,ext3
sha256_generic 8692 2
cryptd 5504 0
aes_x86_64 7340 4
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10744 1
dm_mod 55446 9 dm_crypt
sg 18959 0
usbhid 33411 0
hid 63497 1 usbhid
sr_mod 12602 0
cdrom 29358 1 sr_mod
sd_mod 30459 3
crc_t10dif 1276 1 sd_mod
usb_storage 38425 2
ata_generic 3015 0
b44 21732 0
ssb 38363 1 b44
i915 249816 2
drm_kms_helper 20097 1 i915
sdhci_pci 6218 0
sdhci 14030 1 sdhci_pci
pcmcia 17957 1 ssb
uhci_hcd 18585 0
ata_piix 20477 0
ehci_hcd 31298 0
drm 143558 3 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
i2c_core 15385 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
mmc_core 46156 2 ssb,sdhci
ricoh_mmc 3101 0
led_class 2417 1 sdhci
pcmcia_core 24631 1 pcmcia
mii 3210 2 usbnet,b44
intel_agp 25641 1
libata 133993 2 ata_generic,ata_piix
scsi_mod 123365 5 sg,sr_mod,sd_mod,usb_storage,libata
usbcore 126389 10
rndis_wlan,rndis_host,btusb,cdc_ether,usbnet,usbhid,usb_storage,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
button 4634 1 i915
video 18001 1 i915
output 1692 1 video
thermal 11889 0
fan 3266 0
thermal_sys 11990 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: efd00000-efdfffff
Prefetchable memory behind bridge: 0000000060000000-00000000601fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efa00000-efcfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ef900000-ef9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX
[14e4:170c] (rev 02)
Subsystem: Dell Inspiron 6400 [1028:01af]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 19) (prog-if 01)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller
[1180:0843] (rev 0a)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 05)
Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 005: ID 0a5c:4503 Broadcom Corp.
Bus 005 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface
Subclass)
Bus 005 Device 003: ID 413c:8126 Dell Computer Corp. Wireless 355 Bluetooth
Bus 005 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (700, 'testing'), (600, 'unstable'), (550, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.33-2-amd64 depends on:
ii debconf [debconf 1.5.28 Debian configuration management sy
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-base 2.6.33-1~experimental.2 Linux image base package
ii module-init-tool 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.33-2-amd64 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
Versions of packages linux-image-2.6.33-2-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.33 <none> (no description available)
Versions of packages linux-image-2.6.33-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.22 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.33-2-amd64/prerm/removing-running-kernel-2.6.33-2-amd64: true
linux-image-2.6.33-2-amd64/postinst/depmod-error-initrd-2.6.33-2-amd64: false
linux-image-2.6.33-2-amd64/postinst/bootloader-error-2.6.33-2-amd64:
linux-image-2.6.33-2-amd64/prerm/would-invalidate-boot-loader-2.6.33-2-amd64:
true
linux-image-2.6.33-2-amd64/postinst/bootloader-test-error-2.6.33-2-amd64:
linux-image-2.6.33-2-amd64/postinst/missing-firmware-2.6.33-2-amd64:
--
bye,
pabs
http://wiki.debian.org/PaulWise
signature.asc
Description: This is a digitally signed message part
--- End Message ---
