Your message dated Wed, 5 Jun 2013 19:12:17 +0200
with message-id <20130605171217.ga15...@inutil.org>
and subject line Re: Bug#579332: linux-image-2.6.32-3-686: module sn9c102 over
gspca_sonixb
has caused the Debian Bug report #579332,
regarding linux-image-2.6.32-3-686: module sn9c102 over gspca_sonixb
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
579332: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=579332
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-9
Severity: normal
Tags: sid
The webcam genius videocam messenger (ID 0c45:602e Microdia VideoCAM Messenger)
works with the gspca_sonixb module, not with the sn9c102 module. The image with
the sn9c102 module is really dark. Is not posible to enable the gspca_sonixb
module because is disabled from kernel source as i can see in sonixb.c #if
!defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, #endif
-- Package-specific info:
** Version:
Linux version 2.6.32-3-686 (Debian 2.6.32-9) (m...@debian.org) (gcc version
4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=/dev/hda1 ro
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 3730.939417] usb 1-2: V4L2 device /dev/video0 deregistered
[ 3750.111544] gspca: main v2.7.0 registered
[ 3750.175923] usbcore: registered new interface driver sonixb
[ 3750.177101] sonixb: registered
[ 4133.763174] usbcore: deregistering interface driver sonixb
[ 4133.764795] sonixb: deregistered
[ 4133.766358] gspca: main deregistered
[ 4161.184700] gspca: main v2.7.0 registered
[ 4161.186260] gspca_sonixb: Unknown parameter `help'
[ 4180.152724] sn9c102: Unknown parameter `help'
[ 4187.176585] sn9c102: Unknown parameter `gamma'
[ 4282.740797] sn9c102: Unknown parameter `--help'
[ 4361.241805] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers
v1:1.47pre49
[ 4361.243801] usb 1-2: SN9C10[12] PC Camera Controller detected (vid:pid
0x0C45:0x602E)
[ 4361.396768] usb 1-2: [sn9c102_i2c_try_raw_write:468] I2C write failed for
MT9V111 image sensor
[ 4361.531769] usb 1-2: OV7630 image sensor detected
[ 4361.531780] usb 1-2: [sn9c102_usb_probe:3311] Support for OV7630 maintained
by Luca Risolia <luca.riso...@studio.unibo.it>
[ 4361.816714] usb 1-2: [sn9c102_init:1684] Compressed video format is active,
quality 1
[ 4361.831721] usb 1-2: [sn9c102_init:1707] Image sensor supports 'global gain'
control
[ 4361.840706] usb 1-2: [sn9c102_init:1707] Image sensor supports 'exposure'
control
[ 4361.849702] usb 1-2: [sn9c102_init:1707] Image sensor supports 'white
balance background: red' control
[ 4361.858702] usb 1-2: [sn9c102_init:1707] Image sensor supports 'white
balance background: blue' control
[ 4361.861703] usb 1-2: [sn9c102_init:1707] Image sensor supports 'red balance'
control
[ 4361.864701] usb 1-2: [sn9c102_init:1707] Image sensor supports 'blue
balance' control
[ 4361.873700] usb 1-2: [sn9c102_init:1707] Image sensor supports 'auto adjust'
control
[ 4361.882710] usb 1-2: [sn9c102_init:1707] Image sensor supports 'vertical
flip' control
[ 4361.885701] usb 1-2: [sn9c102_init:1707] Image sensor supports 'green
balance' control
[ 4361.894706] usb 1-2: [sn9c102_init:1707] Image sensor supports 'band filter'
control
[ 4361.903699] usb 1-2: [sn9c102_init:1707] Image sensor supports 'rgb gamma'
control
[ 4361.903712] usb 1-2: Initialization succeeded
[ 4361.903901] usb 1-2: V4L2 device registered as /dev/video0
[ 4361.903905] usb 1-2: Optional device control through 'sysfs' interface
disabled
[ 4361.903909] usb 1-2: [sn9c102_usb_probe:3368] Compile the kernel with the
'CONFIG_VIDEO_ADV_DEBUG' configuration option to enable it.
[ 4361.903945] usbcore: registered new interface driver sn9c102
[ 4361.913828] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open
[ 4361.913849] sn9c102: VIDIOC_QUERYCAP
[ 4361.917763] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed
[ 4361.969941] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open
[ 4361.969961] sn9c102: VIDIOC_QUERYCAP
[ 4361.974856] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed
[ 4394.743263] usbcore: deregistering interface driver sn9c102
[ 4394.743307] usb 1-2: Disconnecting SN9C1xx PC Camera...
[ 4394.743311] usb 1-2: V4L2 device /dev/video0 deregistered
[ 4400.941855] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers
v1:1.47pre49
[ 4400.943792] usb 1-2: SN9C10[12] PC Camera Controller detected (vid:pid
0x0C45:0x602E)
[ 4401.231761] usb 1-2: OV7630 image sensor detected
[ 4401.603698] usb 1-2: Initialization succeeded
[ 4401.605496] usb 1-2: V4L2 device registered as /dev/video0
[ 4401.605506] usb 1-2: Optional device control through 'sysfs' interface
disabled
[ 4401.605588] usbcore: registered new interface driver sn9c102
[ 4410.723191] usbcore: deregistering interface driver sn9c102
[ 4410.723235] usb 1-2: Disconnecting SN9C1xx PC Camera...
[ 4410.723239] usb 1-2: V4L2 device /dev/video0 deregistered
[ 4520.544334] gspca: main deregistered
[ 5684.033193] gspca: main v2.7.0 registered
[ 5684.035845] usbcore: registered new interface driver sonixb
[ 5684.036879] sonixb: registered
[ 5706.032048] usbcore: deregistering interface driver sonixb
[ 5706.033479] sonixb: deregistered
[ 5706.034758] gspca: main deregistered
[ 6331.615166] usb 1-2: USB disconnect, address 2
[ 6338.372037] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 6338.552039] usb 1-2: device descriptor read/64, error -62
[ 6338.836029] usb 1-2: device descriptor read/64, error -62
[ 6339.116036] usb 1-2: new full speed USB device using ohci_hcd and address 4
[ 6339.296043] usb 1-2: device descriptor read/64, error -62
[ 6339.580047] usb 1-2: device descriptor read/64, error -62
[ 6339.860029] usb 1-2: new full speed USB device using ohci_hcd and address 5
[ 6340.268022] usb 1-2: device not accepting address 5, error -62
[ 6340.444030] usb 1-2: new full speed USB device using ohci_hcd and address 6
[ 6340.852021] usb 1-2: device not accepting address 6, error -62
[ 6340.852060] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 6360.884030] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 6361.064041] usb 3-1: device descriptor read/64, error -62
[ 6361.348033] usb 3-1: device descriptor read/64, error -62
[ 6361.628040] usb 3-1: new full speed USB device using ohci_hcd and address 3
[ 6361.808282] usb 3-1: device descriptor read/64, error -62
[ 6362.092031] usb 3-1: device descriptor read/64, error -62
[ 6362.372033] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 6362.780040] usb 3-1: device not accepting address 4, error -62
[ 6362.956035] usb 3-1: new full speed USB device using ohci_hcd and address 5
[ 6363.364025] usb 3-1: device not accepting address 5, error -62
[ 6363.364063] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 6383.500048] usb 1-2: new full speed USB device using ohci_hcd and address 7
[ 6383.709971] usb 1-2: New USB device found, idVendor=0c45, idProduct=602e
[ 6383.709980] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6383.709983] usb 1-2: Product: USB camera
[ 6383.710203] usb 1-2: configuration #1 chosen from 1 choice
[ 6383.765147] gspca: main v2.7.0 registered
[ 6383.767726] usbcore: registered new interface driver sonixb
[ 6383.768859] sonixb: registered
[ 6446.595276] usbcore: deregistering interface driver sonixb
[ 6446.596969] sonixb: deregistered
[ 6446.598487] gspca: main deregistered
[ 7148.244281] gspca: main v2.7.0 registered
[ 7148.247045] usbcore: registered new interface driver sonixb
[ 7148.247727] sonixb: registered
[ 7159.924981] usbcore: deregistering interface driver sonixb
[ 7159.925841] sonixb: deregistered
[ 7159.926946] gspca: main deregistered
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
fuse 43750 1
loop 9753 0
tuner_simple 9694 1
tuner_types 7537 1 tuner_simple
snd_intel8x0 19523 2
tea5767 4529 0
snd_ac97_codec 79140 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
tuner 14428 1
snd_pcm_oss 28671 0
snd_mixer_oss 10461 2 snd_pcm_oss
snd_pcm 47362 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event
saa7134 119996 0
ir_common 22187 1 saa7134
snd_timer 12258 2 snd_pcm,snd_seq
v4l2_common 9816 2 tuner,saa7134
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
videodev 25541 3 tuner,saa7134,v4l2_common
snd 34363 11
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
v4l1_compat 10250 1 videodev
videobuf_dma_sg 7199 1 saa7134
videobuf_core 10476 2 saa7134,videobuf_dma_sg
ns558 1599 0
tveeprom 9393 1 saa7134
psmouse 44413 0
evdev 5609 9
gameport 6057 2 ns558
serio_raw 2916 0
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
soundcore 3450 2 snd
i2c_sis96x 2553 0
processor 26571 0
shpchp 21220 0
pcspkr 1207 0
pci_hotplug 18065 1 shpchp
snd_page_alloc 5041 2 snd_intel8x0,snd_pcm
ext4 254909 1
mbcache 3762 1 ext4
jbd2 56059 1 ext4
crc16 1027 1 ext4
ide_cd_mod 21076 0
cdrom 26487 1 ide_cd_mod
ide_gd_mod 17171 3
ide_pci_generic 1924 0
ata_generic 2015 0
libata 114408 1 ata_generic
scsi_mod 101297 1 libata
ohci_hcd 16904 0
ehci_hcd 27574 0
nvidia 8783321 28
sis900 13795 0
sis5513 4888 2
sis_agp 3145 1
floppy 40923 0
i2c_core 12648 9
tuner_simple,tea5767,tuner,saa7134,v4l2_common,videodev,tveeprom,i2c_sis96x,nvidia
button 3598 0
mii 2714 1 sis900
usbcore 98126 3 ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
ide_core 64146 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,sis5513
agpgart 19516 2 nvidia,sis_agp
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 741/741GX/M741
Host [1039:0741] (rev 03)
Subsystem: ASRock Incorporation Device [1849:0741]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
Memory behind bridge: cbd00000-cfefffff
Prefetchable memory behind bridge: aba00000-cbbfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL
Media IO] [1039:0963] (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (prog-if 80 [Master])
Subsystem: ASRock Incorporation Device [1849:5513]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: SIS_IDE
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS]
AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: ASRock Incorporation Device [1849:7012]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0
Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:7002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet [1039:0900] (rev 90)
Subsystem: ASRock Incorporation Device [1849:0900]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at cfffc000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sis900
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video
Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Device [1a7f:2004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at cfffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44A [GeForce
6200] [10de:0221] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2156]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at cfee0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0c45:602e Microdia VideoCAM Messenger
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core)
Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-3-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-686 recommends:
pn firmware-linux-free <none> (no description available)
pn libc6-i686 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information excluded
--- End Message ---
--- Begin Message ---
Version: 2.6.35-1
On Sat, May 01, 2010 at 01:25:31PM +0200, Jean-Francois Moine wrote:
> On Tue, 27 Apr 2010 07:40:01 +0200
> maximilian attems <m...@stro.at> wrote:
>
> > On Mon, Apr 26, 2010 at 11:09:07PM -0500, bedorlan wrote:
> > > Package: linux-2.6
> > > Version: 2.6.32-9
> > > Severity: normal
> > > Tags: sid
> > >
> > > The webcam genius videocam messenger (ID 0c45:602e Microdia
> > > VideoCAM Messenger) works with the gspca_sonixb module, not with
> > > the sn9c102 module. The image with the sn9c102 module is really
> > > dark. Is not posible to enable the gspca_sonixb module because is
> > > disabled from kernel source as i can see in sonixb.c #if !defined
> > > CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
> > > {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, #endif
> >
> > defaults were set in July 2008, please report upstream on
> > bugzilla.kernel.org so that upstream hears about aboves situation.
> > and let us know the bug report so that we can track it.
> > thanks
>
> I am the gspca maintainer and I found this bug report in usenet.
>
> I will move the 0c45:602e webcam from sn9c102 to sonixb. This should go
> to the next Linux kernel (2.6.35).
Closing the bug.
Cheers,
Moritz
--- End Message ---
