Package: src:linux
Version: 3.2.41-2+deb7u2
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
The openafs fileserver, under normal workload, the kernel says:
Jun 4 13:33:25 tania kernel: e1000e 0000:06:00.0: eth0: Detected Hardware Unit
Hang:
Jun 4 13:33:25 tania kernel: TDH <93>
Jun 4 13:33:25 tania kernel: TDT <96>
Jun 4 13:33:25 tania kernel: next_to_use <96>
Jun 4 13:33:25 tania kernel: next_to_clean <92>
Jun 4 13:33:25 tania kernel: buffer_info[next_to_clean]:
Jun 4 13:33:25 tania kernel: time_stamp <10532d958>
Jun 4 13:33:25 tania kernel: next_to_watch <93>
Jun 4 13:33:25 tania kernel: jiffies <10532db0b>
Jun 4 13:33:25 tania kernel: next_to_watch.status <0>
Jun 4 13:33:25 tania kernel: MAC Status <80080783>
Jun 4 13:33:25 tania kernel: PHY Status <796d>
Jun 4 13:33:25 tania kernel: PHY 1000BASE-T Status <7800>
Jun 4 13:33:25 tania kernel: PHY Extended Status <3000>
Jun 4 13:33:25 tania kernel: PCI Status <10>
Jun 4 13:33:27 tania kernel: e1000e 0000:06:00.0: eth0: Detected Hardware Unit
Hang:
Jun 4 13:33:27 tania kernel: TDH <93>
Jun 4 13:33:27 tania kernel: TDT <96>
Jun 4 13:33:27 tania kernel: next_to_use <96>
Jun 4 13:33:27 tania kernel: next_to_clean <92>
Jun 4 13:33:27 tania kernel: buffer_info[next_to_clean]:
Jun 4 13:33:27 tania kernel: time_stamp <10532d958>
Jun 4 13:33:27 tania kernel: next_to_watch <93>
Jun 4 13:33:27 tania kernel: jiffies <10532dcff>
Jun 4 13:33:27 tania kernel: next_to_watch.status <0>
Jun 4 13:33:27 tania kernel: MAC Status <80080783>
Jun 4 13:33:27 tania kernel: PHY Status <796d>
Jun 4 13:33:27 tania kernel: PHY 1000BASE-T Status <7800>
Jun 4 13:33:27 tania kernel: PHY Extended Status <3000>
Jun 4 13:33:27 tania kernel: PCI Status <10>
Jun 4 13:33:29 tania kernel: e1000e 0000:06:00.0: eth0: Detected Hardware Unit
Hang:
Jun 4 13:33:29 tania kernel: TDH <93>
Jun 4 13:33:29 tania kernel: TDT <96>
Jun 4 13:33:29 tania kernel: next_to_use <96>
Jun 4 13:33:29 tania kernel: next_to_clean <92>
Jun 4 13:33:29 tania kernel: buffer_info[next_to_clean]:
Jun 4 13:33:29 tania kernel: time_stamp <10532d958>
Jun 4 13:33:29 tania kernel: next_to_watch <93>
Jun 4 13:33:29 tania kernel: jiffies <10532def3>
Jun 4 13:33:29 tania kernel: next_to_watch.status <0>
Jun 4 13:33:29 tania kernel: MAC Status <80080783>
Jun 4 13:33:29 tania kernel: PHY Status <796d>
Jun 4 13:33:29 tania kernel: PHY 1000BASE-T Status <7800>
Jun 4 13:33:29 tania kernel: PHY Extended Status <3000>
Jun 4 13:33:29 tania kernel: PCI Status <10>
Jun 4 13:33:31 tania kernel: e1000e 0000:06:00.0: eth0: Detected Hardware Unit
Hang:
Jun 4 13:33:31 tania kernel: TDH <93>
Jun 4 13:33:31 tania kernel: TDT <96>
Jun 4 13:33:31 tania kernel: next_to_use <96>
Jun 4 13:33:31 tania kernel: next_to_clean <92>
Jun 4 13:33:31 tania kernel: buffer_info[next_to_clean]:
Jun 4 13:33:31 tania kernel: time_stamp <10532d958>
Jun 4 13:33:31 tania kernel: next_to_watch <93>
Jun 4 13:33:31 tania kernel: jiffies <10532e0e7>
Jun 4 13:33:31 tania kernel: next_to_watch.status <0>
Jun 4 13:33:31 tania kernel: MAC Status <80080783>
Jun 4 13:33:31 tania kernel: PHY Status <796d>
Jun 4 13:33:31 tania kernel: PHY 1000BASE-T Status <7800>
Jun 4 13:33:31 tania kernel: PHY Extended Status <3000>
Jun 4 13:33:31 tania kernel: PCI Status <10>
Jun 4 13:33:31 tania kernel: e1000e 0000:06:00.0: eth0: Reset adapter
Jun 4 13:33:35 tania kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: None
This bug is diferent than the bug 657689. This bug is not seen on older Debian
stable
kernels, from squeeze or etch. As a workaround the kernel was booted with
option pcie_aspm=off.
The kernel taint is from the openafs client module.
* What exactly did you do (or not do) that was effective (or
ineffective)?
As a workaround the kernel was booted with option pcie_aspm=off, but the
results are the
same. The kernel information is from the boot with pcie_aspm=off.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=286f18e7-33e5-4598-a37f-139157b0207d ro console=ttyS1,115200n8
console=tty0 printk.time=n pcie_aspm=off
** Tainted: PWO (4609)
* Proprietary module has been loaded.
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <7800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <c3>
TDT <ce>
next_to_use <ce>
next_to_clean <c2>
buffer_info[next_to_clean]:
time_stamp <10665ff15>
next_to_watch <c3>
jiffies <1066605cf>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <7800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <c3>
TDT <ce>
next_to_use <ce>
next_to_clean <c2>
buffer_info[next_to_clean]:
time_stamp <10665ff15>
next_to_watch <c3>
jiffies <1066607c3>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <7800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <c3>
TDT <ce>
next_to_use <ce>
next_to_clean <c2>
buffer_info[next_to_clean]:
time_stamp <10665ff15>
next_to_watch <c3>
jiffies <1066609b7>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <7800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Reset adapter
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <9c>
TDT <a5>
next_to_use <a5>
next_to_clean <9b>
buffer_info[next_to_clean]:
time_stamp <106673b30>
next_to_watch <9c>
jiffies <106673c5b>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <9c>
TDT <a5>
next_to_use <a5>
next_to_clean <9b>
buffer_info[next_to_clean]:
time_stamp <106673b30>
next_to_watch <9c>
jiffies <106673e4f>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Detected Hardware Unit Hang:
TDH <9c>
TDT <a5>
next_to_use <a5>
next_to_clean <9b>
buffer_info[next_to_clean]:
time_stamp <106673b30>
next_to_watch <9c>
jiffies <106674043>
next_to_watch.status <0>
MAC Status <80080783>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:06:00.0: eth0: Reset adapter
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
** Model information
sys_vendor: empty
product_name: empty
product_version: empty
chassis_vendor: No Enclosure
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: 6.00
board_vendor: TYAN Computer Corporation
board_name: S5197
board_version: empty
** Loaded modules:
lp
parport_pc
parport
joydev
st
xt_multiport
openafs(P)
xfs
ipmi_devintf
ipmi_si
ipmi_msghandler
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
loop
snd_pcm
snd_page_alloc
snd_timer
snd
acpi_cpufreq
radeon
soundcore
ttm
iTCO_wdt
drm_kms_helper
mperf
iTCO_vendor_support
drm
coretemp
psmouse
pcspkr
serio_raw
power_supply
i2c_i801
i2c_algo_bit
i2c_core
evdev
shpchp
rng_core
i3000_edac
edac_core
container
processor
button
thermal_sys
ext3
mbcache
jbd
dm_mod
raid1
md_mod
sr_mod
sg
cdrom
sd_mod
crc_t10dif
ata_generic
floppy
ahci
uhci_hcd
libahci
ehci_hcd
3w_9xxx
ata_piix
libata
e1000e
scsi_mod
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 193.136.166.2
netmask 255.255.255.224
network 193.136.166.0
broadcast 193.136.166.31
gateway 193.136.166.30
dns-nameservers 193.136.166.3 193.136.166.65
dns-search tagus.ist.utl.pt
iface eth1 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:e0:81:4b:a0:f4 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:e0:81:4b:a0:f5 brd ff:ff:ff:ff:ff:ff
inet 193.136.166.2/27 brd 193.136.166.31 scope global eth0
inet6 2001:690:2100:1080:2e0:81ff:fe4b:a0f5/64 scope global dynamic
valid_lft 300sec preferred_lft 60sec
inet6 fe80::2e0:81ff:fe4b:a0f5/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 80693996 505808 0 0 0 0 0 0 80693996
505808 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 603115110006 660729848 0 2680 0 0 0 66393
362187484935 514729311 0 0 0 0 0 0
*** Protocol statistics:
Ip:
660859911 total packets received
0 forwarded
0 incoming packets discarded
660855348 incoming packets delivered
513199047 requests sent out
1 fragments dropped after timeout
9036 reassemblies required
4473 packets reassembled ok
1 packet reassembles failed
26070 fragments received ok
52140 fragments created
Icmp:
16960 ICMP messages received
171 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10335
timeout in transit: 30
echo requests: 6594
echo replies: 1
72903 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 66309
echo replies: 6594
IcmpMsg:
InType0: 1
InType3: 10335
InType8: 6594
InType11: 30
OutType0: 6594
OutType3: 66309
Tcp:
132 active connections openings
803 passive connection openings
13 failed connection attempts
743 connection resets received
2 connections established
1489719 segments received
2730894 segments send out
531 segments retransmited
0 bad segments received.
936 resets sent
Udp:
659283913 packets received
66122 packets to unknown port received.
2573 packet receive errors
512352383 packets sent
RcvbufErrors: 37
UdpLite:
TcpExt:
99 TCP sockets finished time wait in fast timer
8142 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 10 times
1025 packets directly queued to recvmsg prequeue.
6999 bytes directly received in process context from prequeue
292184 packet headers predicted
108 packets header predicted and directly queued to user
20215 acknowledgments not containing data payload received
1334919 predicted acknowledgments
80 times recovered from packet loss by selective acknowledgements
4 congestion windows recovered without slow start after partial ack
82 TCP data loss events
TCPLostRetransmit: 3
310 fast retransmits
38 forward retransmits
25 retransmits in slow start
36 other TCP timeouts
10 DSACKs sent for old packets
9 DSACKs received
57 connections reset due to unexpected data
12 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 7
TCPSackShifted: 1796
TCPSackMerged: 310
TCPSackShiftFallback: 251
IpExt:
InBcastPkts: 3416
InOctets: -1447937392
OutOctets: 711355943
InBcastOctets: 468194
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7230/3000/3010 Memory Controller
Hub [8086:2778] (rev c0)
Subsystem: Intel Corporation E7230/3000/3010 Memory Controller Hub
[8086:2778]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: i3000_edac
00:01.0 PCI bridge [0604]: Intel Corporation E7230/3000/3010 PCI Express Root
Port [8086:2779] (rev c0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da500000-da5fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 82975X/3010 PCI Express Root Port
[8086:277a] (rev c0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dad00000-daefffff
Prefetchable memory behind bridge: 00000000daf00000-00000000db0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: da000000-da4fffff
Prefetchable memory behind bridge: 00000000dab00000-00000000dacfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: da600000-da6fffff
Prefetchable memory behind bridge: 00000000da800000-00000000da9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
[8086:27c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
[8086:27c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
[8086:27ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
[8086:27cb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
[8086:27cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at daa00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: da700000-da7fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation Device [8086:27b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller
[8086:27df]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801GR/GDH
(ICH7R/ICH7DH) SATA Controller [RAID mode] [8086:27c3] (rev 01)
Subsystem: Intel Corporation Device [8086:27c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at 30e8 [size=8]
Region 1: I/O ports at 30dc [size=4]
Region 2: I/O ports at 30e0 [size=8]
Region 3: I/O ports at 30d8 [size=4]
Region 4: I/O ports at 30b0 [size=16]
Region 5: Memory at daa00400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller
[8086:27da] (rev 01)
Subsystem: Intel Corporation NM10/ICH7 Family SMBus Controller
[8086:27da]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da500000-da5fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d9ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:04.0 RAID bus controller [0104]: 3ware Inc 9550SX SATA-II RAID PCI-X
[13c1:1003]
Subsystem: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8000000 (64-bit, prefetchable) [size=32M]
Region 2: Memory at da500000 (64-bit, non-prefetchable) [size=4K]
Region 4: I/O ports at 4000 [size=64]
[virtual] Expansion ROM at da520000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3w-9xxx
05:00.0 Ethernet controller [0200]: Intel Corporation 82573E Gigabit Ethernet
Controller (Copper) [8086:108c] (rev 03)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at da400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 5000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
06:00.0 Ethernet controller [0200]: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) [8086:108b] (rev 03)
Subsystem: Tyan Computer Device [10f1:5161]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at da680000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at da600000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 6000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
0a:02.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices [AMD] nee ATI ES1000 [1002:515e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 7000 [size=256]
Region 2: Memory at da700000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at da720000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130605120512.1602.77733.report...@tania.tagus.ist.utl.pt
