Your message dated Tue, 4 Jun 2013 19:43:45 +0200
with message-id <20130604174345.GA4567@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #549187,
regarding linux-image-2.6.26-2-686: ftdi_sio disconnects FT232RL after
bitbanging
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
549187: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=549187
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19
Severity: normal
1. Hooked the FT232RL to USB
[ 1038.709289] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1038.709396] ftdi_sio: Detected FT232RL
[ 1038.709509] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1038.714366] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1038.714443] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1038.714505] usb 1-1: Product: FT245R USB FIFO
[ 1038.714560] usb 1-1: Manufacturer: FTDI
[ 1038.714615] usb 1-1: SerialNumber: A6005qyc
2. sudo apt-get install libftdi-dev
3. gcc -lftdi -o /usr/share/doc/libftdi-dev/examples/bitbang2
/usr/share/doc/libftdi-dev/examples/bitbang2.c
4. /usr/share/doc/libftdi-dev/examples/bitbang2 -d 1 0x00
5. It works, but this appears in dmesg
[ 1046.425463] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[ 1046.425567] ftdi_sio 1-1:1.0: device disconnected
6. /usr/share/doc/libftdi-dev/examples/bitbang2 -d 1 0xff
7. Doesn't work anymore :(
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19) (da...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC
2009
** Command line:
root=/dev/sda1 ro
** Not tainted
** Kernel log:
[ 12.963940] usbcore: registered new interface driver usbserial
[ 12.964044] usbserial: USB Serial support registered for generic
[ 12.964147] usbcore: registered new interface driver usbserial_generic
[ 12.964206] usbserial: USB Serial Driver core
[ 13.011865] usbserial: USB Serial support registered for FTDI USB Serial
Device
[ 13.011973] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 13.012087] ftdi_sio: Detected FT232RL
[ 13.012207] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 13.012299] usbcore: registered new interface driver ftdi_sio
[ 13.012356] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 13.320715] lirc_dev: IR Remote Control driver registered, major 61
[ 13.347738] lirc_dev: lirc_register_plugin: sample_rate: 80
[ 13.409848] input: Power Button (FF) as /class/input/input0
[ 13.426919] ACPI: Power Button (FF) [PWRF]
[ 13.427169] input: Power Button (CM) as /class/input/input1
[ 13.436587] ACPI: Power Button (CM) [PWRB]
[ 13.938683] usbcore: registered new interface driver lirc_mceusb
[ 13.938754] lirc_mceusb: USB Microsoft IR Transceiver Driver v0.2
[ 14.298636] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.368060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.446325] intel_rng: Firmware space is locked read-only. If you can't or
[ 14.446329] intel_rng: don't want to disable this in firmware setup, and if
[ 14.446332] intel_rng: you are certain that your system has a functional
[ 14.446334] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 14.620734] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 17
[ 14.931979] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 14.932146] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 14.984650] input: PC Speaker as /class/input/input2
[ 15.290666] parport_pc 00:0d: reported by Plug and Play ACPI
[ 15.290784] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 15.304088] intel8x0_measure_ac97_clock: measured 54624 usecs
[ 15.304153] intel8x0: clocking to 48000
[ 16.337625] EXT3 FS on sda1, internal journal
[ 16.913387] loop: module loaded
[ 17.119093] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[ 23.676135] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 27.310090] NET: Registered protocol family 10
[ 27.310879] lo: Disabled Privacy Extensions
[ 37.920016] eth0: no IPv6 routers present
[ 182.936366] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[ 182.936470] ftdi_sio 1-1:1.0: device disconnected
[ 1036.560062] usb 1-1: USB disconnect, address 2
[ 1038.508016] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 1038.704004] usb 1-1: configuration #1 chosen from 1 choice
[ 1038.709289] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1038.709396] ftdi_sio: Detected FT232RL
[ 1038.709509] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1038.714366] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1038.714443] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1038.714505] usb 1-1: Product: FT245R USB FIFO
[ 1038.714560] usb 1-1: Manufacturer: FTDI
[ 1038.714615] usb 1-1: SerialNumber: A6005qyc
[ 1046.425463] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[ 1046.425567] ftdi_sio 1-1:1.0: device disconnected
[ 1145.747427] usbcore: deregistering interface driver ftdi_sio
[ 1145.747545] usbserial: USB Serial deregistering driver FTDI USB Serial Device
[ 1150.570026] usbcore: deregistering interface driver usbserial_generic
[ 1150.570146] usbserial: USB Serial deregistering driver generic
[ 1150.570222] usbcore: deregistering interface driver usbserial
[ 1171.020027] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1195.772023] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1197.604041] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1202.952031] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1208.316017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1229.408018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1229.960016] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1232.484017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1236.556025] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1286.776017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1329.588018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1333.564020] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1333.984023] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1339.084025] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1344.156020] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 1345.964019] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 3800.196020] usb 3-3: reset high speed USB device using ehci_hcd and address 3
[ 5290.436018] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 5300.316017] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 5329.524043] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 6892.832059] usb 1-1: USB disconnect, address 3
[ 6894.564013] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 6894.760004] usb 1-1: configuration #1 chosen from 1 choice
[ 6894.770328] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 6894.770370] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6894.770396] usb 1-1: Product: FT245R USB FIFO
[ 6894.770417] usb 1-1: Manufacturer: FTDI
[ 6894.770437] usb 1-1: SerialNumber: A6005qyc
[ 6894.850546] usbcore: registered new interface driver usbserial
[ 6894.850601] usbserial: USB Serial support registered for generic
[ 6894.850661] usbcore: registered new interface driver usbserial_generic
[ 6894.850686] usbserial: USB Serial Driver core
[ 6894.857834] usbserial: USB Serial support registered for FTDI USB Serial
Device
[ 6894.857925] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 6894.857989] ftdi_sio: Detected FT232RL
[ 6894.858070] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 6894.858115] usbcore: registered new interface driver ftdi_sio
[ 6894.858139] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[ 6911.332044] usb 1-1: reset full speed USB device using uhci_hcd and address 4
[ 6911.493474] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[ 6911.493474] ftdi_sio 1-1:1.0: device disconnected
** Loaded modules:
Module Size Used by
ftdi_sio 44264 0
usbserial 26472 1 ftdi_sio
ipv6 235396 10
smsc47m1 8168 0
lm90 11784 0
loop 12748 0
evdev 8000 0
parport_pc 22500 0
parport 30988 1 parport_pc
pcspkr 2432 0
serio_raw 4740 0
snd_intel8x0 26268 0
snd_ac97_codec 88452 1 snd_intel8x0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62660 2 snd_intel8x0,snd_ac97_codec
snd_seq 41456 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
psmouse 32336 0
snd 45636 6
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_i801 7920 0
i2c_core 19828 2 lm90,i2c_i801
soundcore 6368 1 snd
rng_core 3940 0
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
shpchp 25528 0
pci_hotplug 23460 1 shpchp
container 3456 0
button 6096 0
lirc_mceusb 7648 1
lirc_dev 10548 1 lirc_mceusb
intel_agp 22524 1
agpgart 28808 1 intel_agp
ext3 105576 1
jbd 39476 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 2
usb_storage 77120 1
floppy 47716 0
ata_generic 4676 0
libata 140448 1 ata_generic
scsi_mod 129548 3 sd_mod,usb_storage,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
e100 28908 0
mii 4896 1 e100
piix 6568 0 [permanent]
ide_core 96168 2 ide_pci_generic,piix
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 7
ftdi_sio,usbserial,lirc_mceusb,usb_storage,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface [8086:2560] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev
01) (prog-if 00 [VGA controller])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel modules: i2c-i810, intelfb
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0100000-c01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge [8086:24c0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller
[8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1840 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 01)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at c0080c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0080800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (LOM)
Ethernet Controller [8086:1039] (rev 81)
Subsystem: IBM NetVista A30p [1014:0267]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100, eepro100
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
