Your message dated Tue, 4 Jun 2013 00:30:38 +0200
with message-id <20130603223038.GE5604@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #516815,
regarding linux-image-2.6.26-1-686: iowait spikes after lenny upgrade, pdflush
& kjournald use 99% io on xfs filesystem]
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
516815: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516815
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: important
System was upgraded from etch to lenny. pdflush and kjournald take 99% of
IO, iostat shows increasing IO wait % whenever disk is accessed
/dev/sda10 is xfs formatted, running from a Dell perc raid.
http://forums.debian.net/viewtopic.php?t=35993
http://people.binf.ku.dk/~hanne/b2evolution/blogs/index.php?blog=5&title=tuning-vm-on-24-core-128-gb-ram-machine&disp=single&more=1&c=1&tb=1&pb=1
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
[ 5.076337] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[ 5.076337] usb usb1: SerialNumber: 0000:00:0f.2
[ 5.132337] tg3.c:v3.92.1 (June 9, 2008)
[ 5.132337] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) ->
IRQ 28
[ 5.132337] ACPI: PCI Interrupt 0000:04:08.1[A] -> GSI 30 (level, low) ->
IRQ 30
[ 5.174534] eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)]
(PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:56:bb:bf:6a
[ 5.174646] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1]
TSOcap[1]
[ 5.174646] eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
[ 5.175803] AAC0: kernel 2.8-1[6098]
[ 5.174646] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 29 (level, low) -> IRQ 29
[ 5.176007] AAC0: monitor 2.8-1[6098]
[ 5.176074] AAC0: bios 2.8-1[6098]
[ 5.176140] AAC0: serial ABC881D3
[ 5.174647] scsi0 : percraid
[ 5.174647] scsi 0:0:0:0: Direct-Access DELL PERC RAID5 V1.0
PQ: 0 ANSI: 2
[ 5.174647] scsi 0:0:1:0: Direct-Access DELL BACKUP_DRIVE V1.0
PQ: 0 ANSI: 2
[ 5.194427] scsi 0:1:0:0: Direct-Access MAXTOR ATLAS15K_73SCA DT60
PQ: 0 ANSI: 3
[ 5.195766] scsi 0:1:1:0: Direct-Access MAXTOR ATLAS15K_73SCA DT60
PQ: 0 ANSI: 3
[ 5.198427] scsi 0:1:2:0: Direct-Access MAXTOR ATLAS15K_73SCA DT60
PQ: 0 ANSI: 3
[ 5.198427] scsi 0:1:3:0: Direct-Access MAXTOR ATLAS15K_73SCA DT60
PQ: 0 ANSI: 3
[ 5.202453] scsi 0:1:4:0: Direct-Access SEAGATE ST3146807LC DS09
PQ: 0 ANSI: 3
[ 5.221224] eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)]
(PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0d:56:bb:bf:6c
[ 5.221322] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1]
TSOcap[1]
[ 5.221407] eth1: dma_rwctrl[769c4000] dma_mask[64-bit]
[ 5.242956] hda: ATAPI 24X CD-ROM drive, 128kB Cache
[ 5.243167] Uniform CD-ROM driver Revision: 3.20
[ 5.420020] scsi 0:1:6:0: Processor PE/PV 1x5 SCSI BP 1.1
PQ: 0 ANSI: 2
[ 13.669945] Driver 'sd' needs updating - please use bus_type methods
[ 13.669945] sd 0:0:0:0: [sda] 430071552 512-byte hardware sectors (220197 MB)
[ 13.669945] sd 0:0:0:0: [sda] Write Protect is off
[ 13.669945] sd 0:0:0:0: [sda] Mode Sense: 06 00 00 00
[ 13.669945] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.670151] sd 0:0:0:0: [sda] 430071552 512-byte hardware sectors (220197 MB)
[ 13.670302] sd 0:0:0:0: [sda] Write Protect is off
[ 13.670382] sd 0:0:0:0: [sda] Mode Sense: 06 00 00 00
[ 13.670929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.671034] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 13.707323] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.707630] sd 0:0:1:0: [sdb] 286716544 512-byte hardware sectors (146799 MB)
[ 13.707774] sd 0:0:1:0: [sdb] Write Protect is off
[ 13.707848] sd 0:0:1:0: [sdb] Mode Sense: 06 00 00 00
[ 13.707939] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.708129] sd 0:0:1:0: [sdb] 286716544 512-byte hardware sectors (146799 MB)
[ 13.708129] sd 0:0:1:0: [sdb] Write Protect is off
[ 13.708129] sd 0:0:1:0: [sdb] Mode Sense: 06 00 00 00
[ 13.708129] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.708129] sdb: sdb1
[ 13.708731] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[ 13.770370] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.770370] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 13.770370] scsi 0:1:0:0: Attached scsi generic sg2 type 0
[ 13.770370] scsi 0:1:1:0: Attached scsi generic sg3 type 0
[ 13.770370] scsi 0:1:2:0: Attached scsi generic sg4 type 0
[ 13.772174] scsi 0:1:3:0: Attached scsi generic sg5 type 0
[ 13.772313] scsi 0:1:4:0: Attached scsi generic sg6 type 0
[ 13.772432] scsi 0:1:6:0: Attached scsi generic sg7 type 3
[ 14.015900] PM: Starting manual resume from disk
[ 14.035827] kjournald starting. Commit interval 5 seconds
[ 14.035899] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.799395] udevd version 125 started
[ 15.122224] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 15.721715] Linux agpgart interface v0.103
[ 15.900107] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 15.999801] input: Power Button (FF) as /class/input/input0
[ 16.025724] ACPI: Power Button (FF) [PWRF]
[ 16.839327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.871005] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.064356] input: PC Speaker as /class/input/input1
[ 17.739319] Error: Driver 'pcspkr' is already registered, aborting...
[ 18.055412] Adding 506036k swap on /dev/sda2. Priority:-1 extents:1
across:506036k
[ 18.201732] EXT3 FS on sda5, internal journal
[ 18.365861] loop: module loaded
[ 18.422967] device-mapper: uevent: version 1.0.3
[ 18.422967] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 19.302066] kjournald starting. Commit interval 5 seconds
[ 19.302066] EXT3 FS on sda1, internal journal
[ 19.302066] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.302066] kjournald starting. Commit interval 5 seconds
[ 19.302066] EXT3 FS on sda9, internal journal
[ 19.302066] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.354073] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 19.354324] SGI XFS Quota Management subsystem
[ 22.528095] XFS mounting filesystem sda10
[ 22.528095] Ending clean XFS mount for filesystem: sda10
[ 22.536474] kjournald starting. Commit interval 5 seconds
[ 22.628955] EXT3 FS on sda6, internal journal
[ 22.628955] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.536474] kjournald starting. Commit interval 5 seconds
[ 22.640955] EXT3 FS on sda8, internal journal
[ 22.640955] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.536474] kjournald starting. Commit interval 5 seconds
[ 22.657131] EXT3 FS on sda7, internal journal
[ 22.657131] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.433364] NET: Registered protocol family 10
[ 24.433364] lo: Disabled Privacy Extensions
[ 24.433364] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.982589] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 25.982589] tg3: eth0: Flow control is off for TX and off for RX.
[ 25.982589] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.773307] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 235300 24
xfs 458072 1
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
snd_pcm 62596 0
evdev 8000 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
psmouse 32336 0
serio_raw 4740 0
pcspkr 2432 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
button 6096 0
i2c_piix4 7216 0
i2c_core 19828 1 i2c_piix4
sworks_agp 6720 0
agpgart 28776 1 sworks_agp
dcdbas 6272 0
ext3 105512 6
jbd 39444 1 ext3
mbcache 7108 1 ext3
sg 26964 0
sd_mod 22200 9
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
libata 140384 1 ata_generic
dock 8304 1 libata
aacraid 57388 8
floppy 47716 0
scsi_mod 129356 4 sg,sd_mod,libata,aacraid
tg3 84708 0
ohci_hcd 18500 0
usbcore 118160 2 ohci_hcd
serverworks 4932 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96168 3 ide_cd_mod,serverworks,ide_pci_generic
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
[1166:0014] (rev 33)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.1 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
[1166:0014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.2 Host bridge [0600]: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
[1166:0014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:04.0 Class [ff00]: Dell Embedded Remote Access or ERA/O [1028:000c]
Subsystem: Dell Embedded Remote Access or ERA/O [1028:000c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ecf8 [size=8]
Region 2: I/O ports at ece8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: <access denied>
00:04.1 Class [ff00]: Dell Remote Access Card III [1028:0008]
Subsystem: Dell Remote Access Card III [1028:0008]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec80 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
Capabilities: <access denied>
Kernel driver in use: serial
00:04.2 Class [ff00]: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
Subsystem: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 7
Region 0: I/O ports at ecf4 [size=4]
Capabilities: <access denied>
00:0e.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0121]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
Capabilities: <access denied>
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 32
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4, sworks-agp
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93)
(prog-if 82 [Master PriP])
Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 08b0 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks
00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller
[1166:0220] (rev 05) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Device [1166:0230]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev
05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
03:06.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet [14e4:16a7] (rev 02)
Subsystem: Dell Device [1028:0121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fcf10000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:08.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet [14e4:16a7] (rev 02)
Subsystem: Dell Device [1028:0121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fcf00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
04:08.0 PCI bridge [0604]: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge [8086:0309] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
04:08.1 RAID bus controller [0104]: Dell PowerEdge Expandable RAID Controller
3/Di [1028:000a] (rev 01)
Subsystem: Dell PERC 3/DiB [Boxster] [1028:0121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fcd00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: aacraid
Kernel modules: aacraid
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
Chris Quirk, System Administrator
marblemedia
74 FRASER AVENUE, SUITE 200 - TORONTO, ON - M6K 3E1 - T. 416.646.2711
ext 246 - TTY. 416.645.0436 - F. 416.646.2717
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
