Your message dated Tue, 4 Jun 2013 00:29:54 +0200
with message-id <20130603222954.GD5604@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #517017,
regarding linux-image-2.6.26-1-powerpc: kernel oops on reading from HFS plus
filesystem
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
517017: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517017
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-powerpc
Version: 2.6.26-13
Severity: normal
I had mounted a journaled HFS plus filesystem read-only to access a single file
on that filesystem.
The only file i was accessing at all was an 80G disk image stored at
/Users/xxx/Desktop/laptop.dmg.
no other hfsplus filesystems were mounted. In fact, the only non-tmpfs
filesystem in use was
a vfat filesystem.
I was running photorec on the laptop.dmg file to try to recover data from it,
when i got the kernel oops below.
--dkg
-- Package-specific info:
** Version:
Linux version 2.6.26-1-powerpc (Debian 2.6.26-13) (wa...@debian.org) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Sat Jan 10 14:00:38
CET 2009
** Command line:
root=/dev/ram ro ramdisk_size=70000000
** Tainted: G D (128)
** Kernel log:
[ 263.225298] usb 4-2: Manufacturer: USB
[ 263.234473] usb 4-2: SerialNumber: XZ187S087WMGK8IG
[ 263.285729] usb-storage: device found at 2
[ 263.285738] usb-storage: waiting for device to settle before scanning
[ 263.789714] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 263.799193] Uniform CD-ROM driver Revision: 3.20
[ 263.895416] PowerMac i2c bus pmu 2 registered
[ 263.904572] PowerMac i2c bus pmu 1 registered
[ 263.913502] PowerMac i2c bus mac-io 0 registered
[ 263.922371] PowerMac i2c bus uni-n 1 registered
[ 263.931152] PowerMac i2c bus uni-n 0 registered
[ 264.645907] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe346eba]
[ 264.884913] b43-phy0: Broadcom 4306 WLAN found
[ 264.982274] phy0: Selected rate control algorithm 'pid'
[ 265.529072] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 265.561573] snd-aoa-fabric-layout: found bus with layout 51
[ 265.570172] snd-aoa-fabric-layout: Using direct GPIOs
[ 265.594474] snd-aoa-codec-tas: found 'deq' node
[ 265.594512] snd-aoa-fabric-layout: can use this codec
[ 265.672897] snd-aoa-codec-tas: tas found, addr 0x35 on
/pci@f2000000/mac-io@17/i2c@18000/deq@6a
[ 268.263068] device-mapper: uevent: version 1.0.3
[ 268.272791] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 268.293782] usb-storage: device scan complete
[ 268.294832] scsi 1:0:0:0: Direct-Access USB DISK 2.0 1219
PQ: 0 ANSI: 0 CCS
[ 268.639061] Driver 'sd' needs updating - please use bus_type methods
[ 268.665639] sd 1:0:0:0: [sda] 1957888 512-byte hardware sectors (1002 MB)
[ 268.674967] sd 1:0:0:0: [sda] Write Protect is off
[ 268.683191] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 268.683196] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 268.721810] sd 1:0:0:0: [sda] 1957888 512-byte hardware sectors (1002 MB)
[ 268.741738] sd 1:0:0:0: [sda] Write Protect is off
[ 268.750258] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 268.750262] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 268.758731] sda: [mac] sda1 sda2 sda3
[ 268.775102] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 587.801824] ieee1394: Error parsing configrom for node 0-00:1023
[ 587.809815] ieee1394: Node changed: 0-00:1023 -> 0-01:1023
[ 604.334145] ieee1394: Node added: ID:BUS[0-00:1023] GUID[00d04b00e0000550]
[ 604.515561] scsi2 : SBP-2 IEEE-1394
[ 605.528565] ieee1394: sbp2: Logged into SBP-2 device
[ 605.537136] ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload
[2048]
[ 605.548466] scsi 2:0:0:0: Direct-Access-RBC IC35L060 AVER07-0 ER6O
PQ: 0 ANSI: 4
[ 605.593723] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 605.613742] sd 2:0:0:0: [sdb] Write Protect is off
[ 605.622222] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 605.634084] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 605.643655] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 605.665714] sd 2:0:0:0: [sdb] Write Protect is off
[ 605.674342] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 605.686083] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 605.694909] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[ 605.740840] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 676.248786] sd 2:0:0:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 676.254318] sd 2:0:0:0: [sdb] Write Protect is off
[ 676.257912] sd 2:0:0:0: [sdb] Mode Sense: 11 00 00 00
[ 676.261261] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 676.265197] sdb: sdb1
[ 718.761870] eth0: Link is up at 100 Mbps, full-duplex.
[ 729.506089] eth0: Link is up at 100 Mbps, full-duplex.
[ 729.512471] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 2568.590413] hfs: write access to a journaled filesystem is not supported,
use the force option at your own risk, mounting read-only.
[ 4968.702722] Unable to handle kernel paging request for data at address
0x00000628
[ 4968.702983] Faulting instruction address: 0xf25b8f9c
[ 4968.703155] Oops: Kernel access of bad area, sig: 11 [#1]
[ 4968.703326] PowerMac
[ 4968.703398] Modules linked in: hfsplus nls_utf8 nls_cp437 vfat fat nls_base
sbp2 sd_mod dm_crypt dm_mod snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa
arc4 ecb crypto_blkcipher b43 rfkill rng_core mac80211 cfg80211 input_polldev
i2c_powermac ide_cd_mod cdrom snd_aoa_i2sbus snd_pcm snd_timer snd_page_alloc
snd soundcore snd_aoa_soundbus ohci1394 sungem sungem_phy ieee1394 ide_disk
usb_storage ehci_hcd scsi_mod usbhid hid ff_memless ssb pcmcia yenta_socket
rsrc_nonstatic firmware_class pcmcia_core uninorth_agp agpgart evdev
[ 4968.705320] NIP: f25b8f9c LR: f25bb8a8 CTR: c00890f8
[ 4968.705478] REGS: c3639b30 TRAP: 0300 Not tainted (2.6.26-1-powerpc)
[ 4968.705683] MSR: 00009032 <EE,ME,IR,DR> CR: 24024484 XER: 20000000
[ 4968.705946] DAR: 00000628, DSISR: 40000000
[ 4968.706076] TASK = c522b0d0[4753] 'photorec' THREAD: c3638000
[ 4968.706255] GPR00: 00000000 c3639be0 c522b0d0 00000628 c364ac8c 0000004c
0000000c 00000000
[ 4968.706585] GPR08: 00009032 c03bbad0 c041b114 00000000 a1f16000 1006f120
bfe33234 105ad000
[ 4968.706914] GPR16: f25b60bc 00000000 d4ebac88 00000000 00000000 c3686998
c3638000 00001000
[ 4968.707244] GPR24: 00000000 000074e7 00000000 00000863 c364ac8c c50b82ec
0000000c 0000000c
[ 4968.707575] NIP [f25b8f9c] hfsplus_bnode_read+0x50/0x1ec [hfsplus]
[ 4968.707802] LR [f25bb8a8] __hplusfs_brec_find+0x6c/0x138 [hfsplus]
[ 4968.708010] Call Trace:
[ 4968.708090] [c3639be0] [c011a6fc] elv_merged_request+0x38/0x64 (unreliable)
[ 4968.708330] [c3639c00] [f25bb8a8] __hplusfs_brec_find+0x6c/0x138 [hfsplus]
[ 4968.708558] [c3639c40] [f25bba20] hfsplus_brec_find+0xac/0x134 [hfsplus]
[ 4968.708782] [c3639c80] [f25b5b6c] hfsplus_ext_read_extent+0xa8/0x164
[hfsplus]
[ 4968.709021] [c3639cd0] [f25b6198] hfsplus_get_block+0xdc/0x210 [hfsplus]
[ 4968.709244] [c3639d00] [c00caaec] block_read_full_page+0x138/0x3d0
[ 4968.709456] [c3639d70] [f25b45c8] hfsplus_readpage+0x1c/0x2c [hfsplus]
[ 4968.709674] [c3639d80] [c00834e0] __do_page_cache_readahead+0x18c/0x1ec
[ 4968.709899] [c3639dc0] [c007d300] generic_file_aio_read+0x224/0x544
[ 4968.710105] [c3639e30] [c00a0a08] do_sync_read+0xb8/0x10c
[ 4968.710291] [c3639ef0] [c00a1550] vfs_read+0xc0/0x19c
[ 4968.719646] [c3639f10] [c00a1af8] sys_pread64+0x64/0x94
[ 4968.728920] [c3639f40] [c0013968] ret_from_syscall+0x0/0x40
[ 4968.738251] --- Exception: c01 at 0xfda7078
[ 4968.747523] LR = 0xfda701c
[ 4968.756678] Instruction dump:
[ 4968.765756] 54bb053e 7ca56670 23fb1000 54a5103a 7f9f3000 38a50030 7fa32a14
409d0008
[ 4968.775141] 7cdf3378 7c63282e 3d20c03c 3929bad0 <81630000> 556b17be 1d6b0298
7d6b4a14
[ 4968.784730] ---[ end trace dad8d3d0672ae302 ]---
[ 5487.124585] NET: Registered protocol family 10
[ 5487.125950] lo: Disabled Privacy Extensions
[ 5498.121710] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 287816 10
hfsplus 84228 1
nls_utf8 5248 2
nls_cp437 8992 1
vfat 14208 1
fat 52188 1 vfat
nls_base 10624 5 hfsplus,nls_utf8,nls_cp437,vfat,fat
sbp2 23116 1
sd_mod 28656 2
dm_crypt 17316 0
dm_mod 60524 1 dm_crypt
snd_aoa_codec_tas 15200 2
snd_aoa_fabric_layout 14408 0
snd_aoa 19840 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
arc4 5184 2
ecb 6464 2
crypto_blkcipher 21188 2 dm_crypt,ecb
b43 134400 0
rfkill 10132 1 b43
rng_core 8036 1 b43
mac80211 169868 1 b43
cfg80211 29328 1 mac80211
input_polldev 7752 1 b43
i2c_powermac 7552 0
ide_cd_mod 35812 0
cdrom 40216 1 ide_cd_mod
snd_aoa_i2sbus 22820 1
snd_pcm 79780 1 snd_aoa_i2sbus
snd_timer 25508 1 snd_pcm
snd_page_alloc 12392 1 snd_pcm
snd 61876 6
snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 10244 1 snd
snd_aoa_soundbus 9060 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
ohci1394 35888 1
sungem 32772 0
sungem_phy 14848 1 sungem
ieee1394 91584 2 sbp2,ohci1394
ide_disk 16448 2
usb_storage 92232 0
ehci_hcd 41132 0
scsi_mod 153836 3 sbp2,sd_mod,usb_storage
usbhid 48196 0
hid 45256 1 usbhid
ff_memless 8520 1 usbhid
ssb 45924 1 b43
pcmcia 38928 2 b43,ssb
yenta_socket 28332 1
rsrc_nonstatic 13216 1 yenta_socket
firmware_class 11296 2 b43,pcmcia
pcmcia_core 41112 5 b43,ssb,pcmcia,yenta_socket,rsrc_nonstatic
uninorth_agp 12008 1
agpgart 37884 1 uninorth_agp
evdev 13728 0
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
Kernel modules: uninorth-agp
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
[1002:4e50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f1000000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus
Controller [104c:ac56]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
0001:10:17.0 Class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
[106b:003e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 27
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 28
0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev
04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI
[106b:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Kernel modules: uninorth-agp
0002:24:0d.0 Class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100
[106b:003b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2
FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC
(Sun GEM) [106b:0032] (rev 80)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
Kernel modules: sungem
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.26-1-powerpc
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-powerpc depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-powerpc recommends no packages.
Versions of packages linux-image-2.6.26-1-powerpc suggests:
pn linux-doc-2.6.26 <none> (no description available)
pn mkvmlinuz <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-powerpc/preinst/abort-install-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/preinst/overwriting-modules-2.6.26-1-powerpc:
true
linux-image-2.6.26-1-powerpc/postinst/old-dir-initrd-link-2.6.26-1-powerpc:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-powerpc/postinst/depmod-error-2.6.26-1-powerpc: false
linux-image-2.6.26-1-powerpc/prerm/would-invalidate-boot-loader-2.6.26-1-powerpc:
true
linux-image-2.6.26-1-powerpc/postinst/create-kimage-link-2.6.26-1-powerpc:
true
linux-image-2.6.26-1-powerpc/postinst/old-initrd-link-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/initrd-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/preinst/abort-overwrite-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/prerm/removing-running-kernel-2.6.26-1-powerpc:
true
linux-image-2.6.26-1-powerpc/preinst/failed-to-move-modules-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-powerpc/preinst/elilo-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/lilo-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/bootloader-initrd-2.6.26-1-powerpc: true
linux-image-2.6.26-1-powerpc/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-powerpc/postinst/bootloader-test-error-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/depmod-error-initrd-2.6.26-1-powerpc:
false
linux-image-2.6.26-1-powerpc/postinst/bootloader-error-2.6.26-1-powerpc:
linux-image-2.6.26-1-powerpc/postinst/old-system-map-link-2.6.26-1-powerpc:
true
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to cont...@bugs.debian.org with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
