--- Begin Message ---
Package: linux-image-2.6.24-etchnhalf.1-686
Version: 2.6.24-6~etchnhalf.4
Severity: normal
File: /boot/vmlinuz-2.6.24-etchnhalf.1-686
Hi,
after installing the etchnhalf kernel, I found that only the ascii
portion of my keyboard worked on the linux console. It turned out that,
as of 2.6.24, the kernel defaults to starting the console in unicode
mode (vt.default_utf8=1).
On my i386 desktop, this only seemed to set the wrong keyboard mode; but
on my powerpc machine, it somehow messed up the entire keymap.
I don't know what's the policy WRT to such breakage caused by the
etchnhalf kernels, but this has bitten my quite badly, so I'm filing a
bug.
Nikolaus
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.4)
(da...@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21))
#1 SMP Mon Jul 21 11:17:43 UTC 2008
** Command line:
BOOT_IMAGE=Debian ro root=301 reboot=warm noapic vt.default_utf8=0 S
** Not tainted
** Kernel log:
ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
uhci_hcd 0000:00:11.4: UHCI Host Controller
uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:11.4: irq 5, io base 0x00001c00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ
9
uhci_hcd 0000:00:14.0: UHCI Host Controller
uhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:14.0: irq 9, io base 0x00002800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.1[B] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:14.1: UHCI Host Controller
uhci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:14.1: irq 11, io base 0x00002c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.2[C] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
ehci_hcd 0000:00:14.2: EHCI Host Controller
ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:14.2: irq 5, io mem 0xe8008400
ehci_hcd 0000:00:14.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 hda16 hda17 hda18 hda19 >
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
spurious 8259A interrupt: IRQ7.
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Marking nosave pages: 000000000fef0000 - 000000000ff00000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
irda_init()
NET: Registered protocol family 23
Linux agpgart interface v0.102
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 128M @ 0xf0000000
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: PS2++ Logitech Wheel Mouse as /class/input/input4
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ
5
firmware request failed: -2
ACPI: PCI interrupt for device 0000:00:12.0 disabled
Yamaha DS-1 PCI: probe of 0000:00:12.0 failed with error -2
Adding 253896k swap on /dev/hda3. Priority:-1 extents:1 across:253896k
EXT3 FS on hda1, internal journal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-de...@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda12, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: setting half-duplex.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ
5
[drm] Initialized mga 3.2.1 20051102 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Initialized card for AGP DMA.
operapluginwrap[3429]: segfault at 00001dca eip 00001dca esp bfa1e7ac error 4
operapluginwrap[3431]: segfault at 00001dca eip 00001dca esp bfb630ec error 4
operapluginwrap[3432]: segfault at 00001dca eip 00001dca esp bfbd795c error 4
IN=eth0 OUT= MAC=00:50:04:52:d1:9c:00:02:44:52:f4:ab:08:00 SRC=192.168.178.201
DST=192.168.178.202 LEN=222 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=53
DPT=55143 LEN=202
IN=eth0 OUT= MAC=00:50:04:52:d1:9c:00:02:44:52:f4:ab:08:00 SRC=192.168.178.201
DST=192.168.178.202 LEN=222 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=53
DPT=52812 LEN=202
** Loaded modules:
Module Size Used by
mga 58848 2
drm 74324 3 mga
ipt_REJECT 4608 2
xt_tcpudp 3264 5
ipt_LOG 6176 3
nf_conntrack_ipv4 17544 1
xt_state 2528 1
iptable_filter 3040 1
ip_tables 13316 1 iptable_filter
x_tables 14372 5 ipt_REJECT,xt_tcpudp,ipt_LOG,xt_state,ip_tables
nf_conntrack_ftp 9056 0
nf_conntrack 62656 3 nf_conntrack_ipv4,xt_state,nf_conntrack_ftp
nfs 228264 0
lockd 60968 1 nfs
nfs_acl 3584 1 nfs
sunrpc 171484 6 nfs,lockd,nfs_acl
ppdev 8900 0
lp 11204 0
ac 6212 0
battery 13700 0
ipv6 242212 14
nls_iso8859_1 4224 1
nls_cp437 5888 1
vfat 12384 1
fat 48924 1 vfat
dm_snapshot 17060 0
dm_mirror 21792 0
dm_mod 56004 2 dm_snapshot,dm_mirror
snd_ymfpci 34816 0
gameport 14664 1 snd_ymfpci
firmware_class 9472 1 snd_ymfpci
snd_ac97_codec 93348 1 snd_ymfpci
ac97_bus 2240 1 snd_ac97_codec
snd_opl3_lib 9984 1 snd_ymfpci
snd_hwdep 8932 1 snd_opl3_lib
snd_mpu401_uart 8128 1 snd_ymfpci
snd_pcm_oss 38368 0
snd_pcm 72036 3 snd_ymfpci,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 10184 2 snd_ymfpci,snd_pcm
snd_mixer_oss 15424 1 snd_pcm_oss
snd_seq_dummy 3844 0
snd_seq_oss 29632 0
snd_seq_midi 8256 0
snd_rawmidi 22816 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 7040 2 snd_seq_oss,snd_seq_midi
container 4960 0
snd_seq 46736 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21348 4 snd_ymfpci,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 7948 6
snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
button 8528 0
via_agp 10048 1
via_ircc 24308 0
psmouse 36656 0
agpgart 31912 2 drm,via_agp
irda 174652 1 via_ircc
evdev 11200 1
parport_pc 26340 1
parport 34472 3 ppdev,lp,parport_pc
snd 48772 13
snd_ymfpci,snd_ac97_codec,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 6788 0
crc_ccitt 2208 1 irda
shpchp 31220 0
pci_hotplug 27840 1 shpchp
soundcore 7680 1 snd
floppy 54724 0
pcspkr 3264 0
rtc 13148 0
ext3 123272 3
jbd 43892 1 ext3
mbcache 8480 1 ext3
ide_generic 1280 0 [permanent]
ide_cd 36352 0
cdrom 32672 1 ide_cd
ide_disk 15776 7
ata_generic 7556 0
libata 144560 1 ata_generic
scsi_mod 141516 1 libata
ehci_hcd 32556 0
uhci_hcd 23568 0
via82cxxx 8036 0 [permanent]
generic 4484 0 [permanent]
ide_core 108740 5 ide_generic,ide_cd,ide_disk,via82cxxx,generic
usbcore 127724 3 ehci_hcd,uhci_hcd
3c59x 41288 0
mii 5344 1 3c59x
thermal 16092 0
processor 36840 1 thermal
fan 4868 0
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8100000-e8ffffff
Prefetchable memory behind bridge: ea000000-ebffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0e.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX [Cyclone]
[10b7:9055] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1000 [size=128]
Region 1: Memory at e8008000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: <access denied>
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
[1106:3074]
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at 3000 [size=16]
Capabilities: <access denied>
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at 1400 [size=32]
Capabilities: <access denied>
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
00:12.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-754 [DS-1E
Audio Controller] [1073:0012]
Subsystem: Yamaha Corporation DS-XG PCI Audio Codec [1073:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at 2400 [size=64]
Region 2: I/O ports at 2000 [size=4]
Capabilities: <access denied>
00:14.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at 2800 [size=32]
Capabilities: <access denied>
00:14.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 2c00 [size=32]
Capabilities: <access denied>
00:14.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 5
Region 0: Memory at e8008400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G550 AGP
[102b:2527] (rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
[102b:0f84]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ea000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at e8100000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at e8800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at e8120000 [disabled] [size=128K]
Capabilities: <access denied>
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-686
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i
-- debconf information excluded
--- End Message ---
