--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-39
Severity: normal
Kernel bug happend when disconnecting USB device (MP3 player with 2 internal
flash cards)
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-39) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 03:41:26 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=UUID=50233c57-5144-4fe1-8aa4-9fcad3fc9e34 ro
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[73492.621720] scsi12 : SCSI emulation for USB Mass Storage devices
[73492.621867] usb-storage: device found at 3
[73492.621869] usb-storage: waiting for device to settle before scanning
[73497.620084] usb-storage: device scan complete
[73497.620447] scsi 12:0:0:0: Direct-Access MEDION MD 82377 1.14
PQ: 0 ANSI: 0
[73497.621450] sd 12:0:0:0: Attached scsi generic sg5 type 0
[73497.622949] sd 12:0:0:0: [sdd] 7942144 512-byte logical blocks: (4.06
GB/3.78 GiB)
[73497.623796] sd 12:0:0:0: [sdd] Write Protect is off
[73497.623799] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
[73497.623801] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.626016] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.626020] sdd:
[73497.628431] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.628434] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[73498.320720] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[74021.900067] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[74025.614338] usb 1-2: USB disconnect, address 3
[81186.604513] usb 3-2: new full speed USB device using uhci_hcd and address 6
[81188.151917] usb 3-2: New USB device found, idVendor=066f, idProduct=821c
[81188.151921] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[81188.151924] usb 3-2: Product: MP3 Player
[81188.151926] usb 3-2: Manufacturer: Generic
[81188.151928] usb 3-2: SerialNumber: F03A06B6764C0688
[81188.152030] usb 3-2: configuration #1 chosen from 1 choice
[81188.159989] scsi13 : SCSI emulation for USB Mass Storage devices
[81188.160126] usb-storage: device found at 6
[81188.160128] usb-storage: waiting for device to settle before scanning
[81193.161639] usb-storage: device scan complete
[81193.164629] scsi 13:0:0:0: Direct-Access Generic MP3 Player 0100
PQ: 0 ANSI: 4
[81193.167625] scsi 13:0:0:1: Direct-Access Generic MP3 Player 0100
PQ: 0 ANSI: 4
[81193.168201] sd 13:0:0:0: Attached scsi generic sg5 type 0
[81193.168339] sd 13:0:0:1: Attached scsi generic sg6 type 0
[81193.178615] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03
GB/1.89 GiB)
[81193.183611] sd 13:0:0:0: [sdd] Write Protect is off
[81193.183614] sd 13:0:0:0: [sdd] Mode Sense: 3e 00 00 00
[81193.183617] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.186612] sd 13:0:0:1: [sde] 3862528 512-byte logical blocks: (1.97
GB/1.84 GiB)
[81193.191611] sd 13:0:0:1: [sde] Write Protect is off
[81193.191614] sd 13:0:0:1: [sde] Mode Sense: 3e 00 00 00
[81193.191616] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.202611] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03
GB/1.89 GiB)
[81193.207609] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.207612] sdd: sdd1
[81193.219608] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.219612] sde:
[81193.238680] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03
GB/1.89 GiB)
[81193.243608] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.243612] sd 13:0:0:0: [sdd] Attached SCSI removable disk
[81193.251606] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.251610] sd 13:0:0:1: [sde] Attached SCSI removable disk
[81195.003510] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[81195.011496] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector =
1)
[81195.133509] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[81197.804514] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector =
1)
[81273.022290] BUG: unable to handle kernel paging request at 0000100000000000
[81273.022295] IP: [<0000100000000000>] 0x100000000000
[81273.022303] PGD 0
[81273.022305] Oops: 0010 [#1] SMP
[81273.022308] last sysfs file:
/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/host13/target13:0:0/13:0:0:1/block/sde/uevent
[81273.022312] CPU 0
[81273.022313] Modules linked in: nls_utf8 nls_cp437 usb_storage btrfs
zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat
jfs xfs exportfs reiserfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc
acpi_cpufreq cpufreq_userspace cpufreq_stats cpufreq_conservative
cpufreq_powersave ppdev lp binfmt_misc fuse ext3 jbd ext2 loop
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq
snd_timer i915 snd_seq_device drm_kms_helper ata_generic snd drm soundcore
i2c_algo_bit sg video uhci_hcd sr_mod r8169 sym53c8xx i2c_i801 evdev output
ehci_hcd scsi_transport_spi i2c_core snd_page_alloc parport_serial usbcore
nls_base cdrom processor mii pata_jmicron psmouse floppy pcspkr parport_pc
serio_raw parport button ext4 mbcache jbd2 crc16 sd_mod crc_t10dif ahci libata
thermal scsi_mod thermal_sys
[81273.022375] Pid: 18056, comm: umount Not tainted 2.6.32-5-amd64 #1 G33-DS3R
[81273.022377] RIP: 0010:[<0000100000000000>] [<0000100000000000>]
0x100000000000
[81273.022382] RSP: 0018:ffff8801071f1c90 EFLAGS: 00010006
[81273.022385] RAX: 0000100000000000 RBX: ffff880059bcd110 RCX: 00000000000034c1
[81273.022387] RDX: ffff88001d643e00 RSI: ffff880059bcd110 RDI: ffff880059bcd110
[81273.022390] RBP: 000000000109ac40 R08: ffff88012d036a38 R09: 00000000ffffffff
[81273.022393] R10: 0000000000000001 R11: 0000100000000000 R12: ffff88012d12e9c0
[81273.022395] R13: 0000000000000292 R14: 0000000000000000 R15: ffff88001d544f00
[81273.022398] FS: 00007f11da6e8740(0000) GS:ffff880005400000(0000)
knlGS:0000000000000000
[81273.022401] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[81273.022403] CR2: 0000100000000000 CR3: 000000012aa4e000 CR4: 00000000000006f0
[81273.022406] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[81273.022409] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[81273.022411] Process umount (pid: 18056, threadinfo ffff8801071f0000, task
ffff880125469530)
[81273.022413] Stack:
[81273.022415] ffffffff8117e4d7 ffff88012d12e9c0 0000000000000000
ffff880059bcd110
[81273.022419] <0> ffffffff8117ea92 ffff880059bcd110 000000000109a000
ffff8801071f1df8
[81273.022423] <0> ffffffffa0010357 0000000000000000 ffffffffa00103a8
0000000000000000
[81273.022427] Call Trace:
[81273.022434] [<ffffffff8117e4d7>] ? __blk_put_request+0x7b/0xb0
[81273.022437] [<ffffffff8117ea92>] ? blk_put_request+0x26/0x3a
[81273.022446] [<ffffffffa0010357>] ? scsi_execute+0x11e/0x12f [scsi_mod]
[81273.022454] [<ffffffffa00103a8>] ? scsi_execute_req+0x40/0xb9 [scsi_mod]
[81273.022461] [<ffffffffa00103ef>] ? scsi_execute_req+0x87/0xb9 [scsi_mod]
[81273.022469] [<ffffffffa000ad20>] ? ioctl_internal_command+0x64/0x16a
[scsi_mod]
[81273.022476] [<ffffffffa000ae80>] ? scsi_set_medium_removal+0x5a/0x98
[scsi_mod]
[81273.022482] [<ffffffffa002ebe9>] ? sd_release+0xaf/0xc2 [sd_mod]
[81273.022487] [<ffffffff8111285a>] ? __blkdev_put+0x94/0x14c
[81273.022491] [<ffffffff81112903>] ? __blkdev_put+0x13d/0x14c
[81273.022495] [<ffffffff810f144d>] ? deactivate_super+0x60/0x77
[81273.022499] [<ffffffff81103dc0>] ? sys_umount+0x2dc/0x30b
[81273.022503] [<ffffffff812febf6>] ? do_page_fault+0x2e0/0x2fc
[81273.022508] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[81273.022510] Code: Bad RIP value.
[81273.022512] RIP [<0000100000000000>] 0x100000000000
[81273.022516] RSP <ffff8801071f1c90>
[81273.022518] CR2: 0000100000000000
[81273.022520] ---[ end trace 0a95315fe6dfab8e ]---
[81277.840338] usb 3-2: USB disconnect, address 6
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: G33-DS3R
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F6
board_vendor: Gigabyte Technology Co., Ltd.
board_name: G33-DS3R
board_version: x.x
** Loaded modules:
Module Size Used by
nls_utf8 1208 0
nls_cp437 5817 0
usb_storage 40057 1
btrfs 375821 0
zlib_deflate 17746 1 btrfs
crc32c 2560 1
libcrc32c 1074 1 btrfs
ufs 56474 0
qnx4 6194 0
hfsplus 65270 0
hfs 37455 0
minix 21197 0
ntfs 162812 0
vfat 7884 1
msdos 6202 0
fat 40038 2 vfat,msdos
jfs 140105 0
xfs 435449 0
exportfs 3170 1 xfs
reiserfs 194156 0
nfs 241226 2
lockd 57619 1 nfs
fscache 29834 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33508 1 nfs
sunrpc 161589 11 nfs,lockd,nfs_acl,auth_rpcgss
acpi_cpufreq 5571 0
cpufreq_userspace 1992 0
cpufreq_stats 2740 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
ppdev 5030 0
lp 7462 0
binfmt_misc 6431 1
fuse 50924 1
ext3 106710 3
jbd 37221 1 ext3
ext2 52905 1
loop 11799 0
snd_hda_codec_realtek 235618 1
snd_hda_intel 20035 1
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
snd_seq 42881 0
snd_timer 15598 2 snd_pcm,snd_seq
i915 256094 2
snd_seq_device 4493 1 snd_seq
drm_kms_helper 20369 1 i915
ata_generic 3239 0
snd 46526 10
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm 142279 3 i915,drm_kms_helper
soundcore 4598 1 snd
i2c_algo_bit 4225 1 i915
sg 24069 0
video 17445 1 i915
uhci_hcd 18521 0
sr_mod 12602 0
r8169 36840 0
sym53c8xx 64216 0
i2c_i801 7830 0
evdev 7352 8
output 1692 1 video
ehci_hcd 32081 0
scsi_transport_spi 18774 1 sym53c8xx
i2c_core 15819 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
parport_serial 4449 0
usbcore 122674 4 usb_storage,uhci_hcd,ehci_hcd
nls_base 6377 9
nls_utf8,nls_cp437,hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
cdrom 29415 1 sr_mod
processor 29935 1 acpi_cpufreq
mii 3210 1 r8169
pata_jmicron 2280 0
psmouse 49937 0
floppy 49087 0
pcspkr 1699 0
parport_pc 18855 3 parport_serial
serio_raw 3752 0
parport 27954 3 ppdev,lp,parport_pc
button 4650 1 i915
ext4 288350 2
mbcache 5050 3 ext3,ext2,ext4
jbd2 67015 1 ext4
crc16 1319 1 ext4
sd_mod 29921 11
crc_t10dif 1276 1 sd_mod
ahci 32534 7
libata 133776 3 ata_generic,pata_jmicron,ahci
thermal 11674 0
scsi_mod 126533 7
usb_storage,sg,sr_mod,sym53c8xx,scsi_transport_spi,sd_mod,libata
thermal_sys 11942 3 video,processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.254
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.254
# dns-search somewhere.de
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:1d:7d:08:f7:5d brd ff:ff:ff:ff:ff:ff
inet 192.168.0.1/24 brd 192.168.0.255 scope global eth0
inet6 fe80::21d:7dff:fe08:f75d/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 17834 229 0 0 0 0 0 0 17834
229 0 0 0 0 0 0
eth0:294674251 282273 0 0 0 0 0 0 71644425
201597 0 0 0 0 0 0
*** Protocol statistics:
Ip:
247645 total packets received
230 with invalid addresses
0 forwarded
0 incoming packets discarded
247415 incoming packets delivered
201482 requests sent out
Icmp:
5 ICMP messages received
2 input ICMP message failed.
ICMP input histogram:
destination unreachable: 5
5 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 5
IcmpMsg:
InType3: 5
OutType3: 5
Tcp:
4690 active connections openings
20 passive connection openings
44 failed connection attempts
263 connection resets received
2 connections established
239868 segments received
194686 segments send out
341 segments retransmited
0 bad segments received.
489 resets sent
Udp:
6076 packets received
0 packets to unknown port received.
0 packet receive errors
5338 packets sent
UdpLite:
TcpExt:
1325 TCP sockets finished time wait in fast timer
1 time wait sockets recycled by time stamp
1788 delayed acks sent
Quick ack mode was activated 15 times
166 packets directly queued to recvmsg prequeue.
94 bytes directly in process context from backlog
205970 bytes directly received in process context from prequeue
190456 packet headers predicted
145 packets header predicted and directly queued to user
9224 acknowledgments not containing data payload received
33196 predicted acknowledgments
39 congestion windows recovered without slow start after partial ack
115 other TCP timeouts
15 DSACKs sent for old packets
26 DSACKs received
85 connections reset due to unexpected data
245 connections reset due to early user close
45 connections aborted due to timeout
TCPDSACKIgnoredOld: 2
TCPDSACKIgnoredNoUndo: 8
IpExt:
InMcastPkts: 2674
OutMcastPkts: 1925
InBcastPkts: 354
OutBcastPkts: 9
InOctets: 289166836
OutOctets: 68818199
InMcastOctets: 233005
OutMcastOctets: 135081
InBcastOctets: 60141
OutBcastOctets: 702
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express
Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f2300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at e100 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f2100000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e600 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2385000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f2380000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f2400000-f25fffff
Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f2000000-f20fffff
Prefetchable memory behind bridge: 00000000f2800000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2a00000-00000000f2bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2384000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2200000-f22fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller [8086:2916] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at e700 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e900 [size=8]
Region 3: I/O ports at ea00 [size=4]
Region 4: I/O ports at eb00 [size=32]
Region 5: Memory at f2386000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2387000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at f2000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b200 [size=8]
Region 3: I/O ports at b300 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f1000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f2a00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c810
[1000:0001] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f2200000 (32-bit, non-prefetchable) [size=256]
Kernel driver in use: sym53c8xx
04:02.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O
Controller [9710:9835] (rev 01)
Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d100 [size=8]
Region 1: I/O ports at d200 [size=8]
Region 2: I/O ports at d300 [size=8]
Region 3: I/O ports at d400 [size=8]
Region 4: I/O ports at d500 [size=8]
Region 5: I/O ports at d600 [size=16]
Kernel driver in use: parport_serial
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-39 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--- End Message ---
