Package: src:linux
Version: 3.8.13-1
Severity: normal
A click with the middle button of the DualPoint Stick (above the
touchpad) on my Dell Latitude E6400 doesn't always have an immediate
effect: I sometimes need to press a key to see the effect (pasted
data). This problem is recent.
I could reproduce it several times, only in Emacs. But I doubt that's
an Emacs problem, because when a USB mouse is attached, I never have
any problem with the middle button (I don't think Emacs can notice a
difference between a mouse and the DualPoint Stick buttons).
-- Package-specific info:
** Version:
Linux version 3.8-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2
(Debian 4.7.2-5) ) #1 SMP Debian 3.8.13-1
** Command line:
root=/dev/mapper/xvii-root ro quiet reboot=pci
** Not tainted
** Kernel log:
[1059164.160057] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[1059164.340075] usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500
[1059164.340082] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[1059164.340090] usb 1-1: Product: BCM2046B1
[1059164.340092] usb 1-1: Manufacturer: Broadcom
[1059164.342128] hub 1-1:1.0: USB hub found
[1059164.344057] hub 1-1:1.0: 3 ports detected
[1059164.349173] usb 3-1: USB disconnect, device number 3
[1059164.600036] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[1059164.837110] usb 3-1: New USB device found, idVendor=0a5c, idProduct=5800
[1059164.837116] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[1059164.837120] usb 3-1: Product: 5880
[1059164.837124] usb 3-1: Manufacturer: Broadcom Corp
[1059164.837127] usb 3-1: SerialNumber: 0123456789ABCD
[1059164.837244] usb 3-1: config 0 descriptor??
[1059165.178083] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
[1059165.296064] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157
[1059165.296068] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[1059165.303354] input: HID 413c:8157 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input20
[1059165.303522] hid-generic 0003:413C:8157.0004: input,hidraw0: USB HID v1.11
Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[1059165.378094] usb 1-1.2: new full-speed USB device number 4 using uhci_hcd
[1059165.499090] usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158
[1059165.499096] usb 1-1.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[1059165.507411] input: HID 413c:8158 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input21
[1059165.507654] hid-generic 0003:413C:8158.0005: input,hidraw1: USB HID v1.11
Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[1059166.182322] usb 1-1.3: new full-speed USB device number 5 using uhci_hcd
[1059166.309322] usb 1-1.3: New USB device found, idVendor=413c, idProduct=8156
[1059166.309333] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[1059166.309342] usb 1-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[1059166.309349] usb 1-1.3: Manufacturer: Dell Computer Corp
[1059166.401195] usbcore: registered new interface driver btusb
[1059167.479271] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059167.482326] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059167.610044] iwlwifi 0000:0c:00.0: Could not complete ALIVE transition: -132
[1059167.610364] iwlwifi 0000:0c:00.0: Failed to run INIT ucode: -132
[1059167.610444] iwlwifi 0000:0c:00.0: Unable to initialize device.
[1059169.040977] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059169.043972] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059169.288721] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059169.291716] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059169.440758] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059173.436566] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059173.439553] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059173.583733] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059176.466274] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[1059176.568195] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[1059176.568404] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[1059206.960342] usb 8-3: new high-speed USB device number 5 using ehci-pci
[1059207.094462] usb 8-3: New USB device found, idVendor=04e8, idProduct=6860
[1059207.094474] usb 8-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=4
[1059207.094482] usb 8-3: Product: SAMSUNG_Android
[1059207.094489] usb 8-3: Manufacturer: SAMSUNG
[1059207.094496] usb 8-3: SerialNumber: 4df1df1231d19f8d
[1059210.255580] usb 8-3: USB disconnect, device number 5
[1059210.528342] usb 8-3: new high-speed USB device number 6 using ehci-pci
[1059210.662103] usb 8-3: New USB device found, idVendor=04e8, idProduct=6860
[1059210.662115] usb 8-3: New USB device strings: Mfr=2, Product=3,
SerialNumber=4
[1059210.662123] usb 8-3: Product: SAMSUNG_Android
[1059210.662130] usb 8-3: Manufacturer: SAMSUNG
[1059210.662137] usb 8-3: SerialNumber: 4df1df1231d19f8d
[1059274.973768] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059274.976843] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059275.123872] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059280.683494] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059280.686539] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059280.828195] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059286.068502] wlan0: authenticate with 00:1f:33:89:73:4e
[1059286.072535] wlan0: send auth to 00:1f:33:89:73:4e (try 1/3)
[1059286.074097] wlan0: authenticated
[1059286.074133] wlan0: waiting for beacon from 00:1f:33:89:73:4e
[1059354.385560] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059354.388613] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059354.539644] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059354.582623] wlan0: authenticate with 00:1f:33:89:73:4e
[1059354.583648] wlan0: send auth to 00:1f:33:89:73:4e (try 1/3)
[1059354.585208] wlan0: authenticated
[1059354.585245] wlan0: waiting for beacon from 00:1f:33:89:73:4e
[1059368.733290] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059368.736323] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059368.886323] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059368.886355] wlan0: authenticate with 00:1f:33:89:73:4e
[1059368.889639] wlan0: send auth to 00:1f:33:89:73:4e (try 1/3)
[1059368.891163] wlan0: authenticated
[1059368.891200] wlan0: waiting for beacon from 00:1f:33:89:73:4e
[1059368.988071] wlan0: associate with 00:1f:33:89:73:4e (try 1/3)
[1059368.993512] wlan0: RX AssocResp from 00:1f:33:89:73:4e (capab=0x401
status=0 aid=3)
[1059368.995856] wlan0: associated
[1059368.995889] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[1059371.502360] wlan0: deauthenticating from 00:1f:33:89:73:4e by local choice
(reason=3)
[1059371.509113] cfg80211: Calling CRDA to update world regulatory domain
[1059371.775663] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[1059371.778700] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[1059371.923523] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1059373.968292] wlan0: authenticate with 00:1f:33:89:73:4e
[1059373.969450] wlan0: send auth to 00:1f:33:89:73:4e (try 1/3)
[1059373.970974] wlan0: authenticated
[1059373.972143] wlan0: associate with 00:1f:33:89:73:4e (try 1/3)
[1059373.975526] wlan0: RX AssocResp from 00:1f:33:89:73:4e (capab=0x401
status=0 aid=3)
[1059373.981333] wlan0: associated
[1059373.981399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A12
board_vendor: Dell Inc.
board_name: 0K672N
board_version:
** Loaded modules:
btusb
udf
ipt_REJECT
xt_multiport
iptable_filter
ip_tables
x_tables
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
crc16
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
firewire_sbp2
loop
fuse
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
arc4
snd_page_alloc
iwldvm
snd_seq_midi
uvcvideo
snd_seq_midi_event
videobuf2_vmalloc
coretemp
snd_rawmidi
mac80211
snd_seq
videobuf2_memops
videobuf2_core
snd_seq_device
pcmcia
joydev
snd_timer
acpi_cpufreq
mperf
kvm
videodev
nouveau
mxm_wmi
iTCO_wdt
ttm
snd
dell_wmi
dell_laptop
yenta_socket
pcmcia_rsrc
pcmcia_core
processor
media
iTCO_vendor_support
microcode
soundcore
iwlwifi
drm_kms_helper
video
ac
drm
i2c_algo_bit
button
battery
i2c_i801
cfg80211
dcdbas
sparse_keymap
evdev
pcspkr
psmouse
wmi
rfkill
lpc_ich
i2c_core
mfd_core
serio_raw
ext3
mbcache
jbd
sha256_generic
cbc
dm_crypt
hid_generic
dm_mod
sg
sd_mod
sr_mod
cdrom
crc_t10dif
hid_apple
usbhid
hid
thermal
thermal_sys
firewire_ohci
sdhci_pci
sdhci
firewire_core
mmc_core
crc_itu_t
ahci
libahci
libata
scsi_mod
ehci_pci
e1000e
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network
Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0600000-f07fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f1e00000-f1efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS
160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0c00000-f0ffffff (prefetchable)
Memory window 1: f1000000-f13fffff
I/O window 0: 00005400-000054ff
I/O window 1: 00005000-000050ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1eff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1eff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300
[8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 003 Device 004: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications
Processor
Bus 007 Device 003: ID 0c45:63f8 Microdia Sonix Integrated Webcam
Bus 008 Device 006: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone
[Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab 10.1]
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 413c:8157 Dell Computer Corp. Integrated Keyboard
Bus 001 Device 004: ID 413c:8158 Dell Computer Corp. Integrated Touchpad /
Trackstick
Bus 001 Device 005: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth
Mini-card
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.8-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.8-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-2-amd64 suggests:
ii debian-kernel-handbook 1.0.15
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.8 3.8.13-1
Versions of packages linux-image-3.8-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-2-amd64/prerm/removing-running-kernel-3.8-2-amd64: true
linux-image-3.8-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.8-2-amd64/postinst/missing-firmware-3.8-2-amd64:
linux-image-3.8-2-amd64/postinst/depmod-error-initrd-3.8-2-amd64: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20130531132711.ga32...@xvii.vinc17.org
