Package: src:linux
Version: 3.2.41-2
Severity: important
I successfully ran memtest86+ for 6 passes before sending this report to
gain some confidence that this was not the result of a hardware malfunction:
[37171.465274] BUG: unable to handle kernel paging request at 248c1729
[37171.468869] IP: [<c10cfaf7>] generic_fillattr+0x98/0x98
[37171.468869] *pdpt = 0000000018546001 *pde = 0000000000000000
[37171.468869] Oops: 0000 [#1] SMP
[37171.468869] Modules linked in: iptable_filter ip_tables x_tables pl2303
usbserial sha1_generic hmac cts des_generic autofs4 video ac power_supply
binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs lockd fscache auth_rpcgss nfs_acl
sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1
md_mod i82875p_edac edac_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss
snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq
snd_timer snd_seq_device pcspkr evdev snd soundcore snd_page_alloc iTCO_wdt
iTCO_vendor_support rng_core i2c_i801 parport_pc shpchp parport i2c_core
processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg
sd_mod crc_t10dif sr_mod cdrom thermal usb_storage ata_generic fan thermal_sys
floppy sata_sil ata_piix uhci_hcd libata firewire_ohci firewire_core crc_itu_t
e1000 ehci_hcd scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[37171.468869]
[37171.468869] Pid: 5730, comm: sed Not tainted 3.2.0-4-686-pae #1 Debian
3.2.41-2 /IC7/IC7-G(Intel i875P-ICH5)
[37171.468869] EIP: 0060:[<c10cfaf7>] EFLAGS: 00010282 CPU: 0
[37171.468869] EIP is at vfs_getattr+0x0/0x4c
[37171.468869] EAX: f4426080 EBX: f3f32580 ECX: d135bf64 EDX: e5492b98
[37171.468869] ESI: d135bf64 EDI: fffffff7 EBP: d135a000 ESP: d135bf4c
[37171.468869] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[37171.468869] Process sed (pid: 5730, ti=d135a000 task=f3f03560
task.ti=d135a000)
[37171.468869] Stack:
[37171.468869] c10cfbf1 00000000 00000003 b77d6890 00000003 c10cfdc9 f3f32580
00000003
[37171.468869] 00000020 c10cc0b7 f6cf5000 f3f32588 00000000 00000000 00000024
00000100
[37171.468869] 00000000 00000000 b77d3190 d135a000 c10cc0df 00000000 b77d3190
b77d6890
[37171.468869] Call Trace:
[37171.468869] [<c10cfbf1>] ? vfs_fstat+0x25/0x3b
[37171.468869] [<c10cfdc9>] ? sys_fstat64+0xe/0x21
[37171.468869] [<c10cc0b7>] ? do_sys_open+0xc3/0xcd
[37171.468869] [<c10cc0df>] ? sys_open+0x1e/0x23
[37171.468869] [<c12c2714>] ? syscall_call+0x7/0xb
[37171.468869] Code: 8b 48 44 8b 24 48 89 4a 38 89 5a 00 8b 88 ac 00 00 00 bb
01 24 00 00 d3 e3 89 5a 24 8b 58 54 8b 48 50 89 5a 8b 89 4a 44 5b 5e c3 <8b> 89
c5 57 56 53 89 d3 83 ec 08 8b 7a 20 89 0c 24 e8 2e 1f 05
[37171.468869] EIP: [<c10cfaf7>] vfs_getattr+0x0/0x4c SS:ESP 0068:d135bf4c
[37171.468869] CR2: 00000000248c1729
[37171.695154] ---[ end trace f8a1466a3d64352f ]---
This machine has previously run stable on squeeze; the above occurred on
the same day it was upgraded to wheezy.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/sys-root ro
console=ttyS0,115200n8 quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[ 2382.981889] sd 4:0:0:0: [sdc] Unhandled error code
[ 2382.981895] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 2382.981902] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2382.981919] end_request: I/O error, dev sdc, sector 0
[ 2382.987024] sd 4:0:0:0: [sdc] Unhandled error code
[ 2382.987028] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 2382.987032] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2382.987044] end_request: I/O error, dev sdc, sector 0
[ 2382.992157] sd 4:0:0:0: [sdc] Unhandled error code
[ 2382.992163] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 2382.992170] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2382.992188] end_request: I/O error, dev sdc, sector 0
[ 2382.997305] sd 4:0:0:0: [sdc] Unhandled error code
[ 2382.997309] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
[ 2382.997314] sd 4:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2382.997327] end_request: I/O error, dev sdc, sector 0
[ 3983.840058] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 3984.074839] usb 2-2: New USB device found, idVendor=0557, idProduct=2008
[ 3984.074847] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3984.074853] usb 2-2: Product: Prolific Technology Inc.
[ 3984.074857] usb 2-2: Manufacturer: Prolific Technology Inc.
[ 3984.074862] usb 2-2: SerialNumber: Prolific Technology Inc.
[ 3984.221858] usbcore: registered new interface driver usbserial
[ 3984.221892] USB Serial support registered for generic
[ 3984.236367] usbcore: registered new interface driver usbserial_generic
[ 3984.236374] usbserial: USB Serial Driver core
[ 3984.237792] USB Serial support registered for pl2303
[ 3984.237836] pl2303 2-2:1.0: PL-2303 hack: descriptors matched but endpoints
did not
[ 3984.237864] pl2303 2-2:1.1: pl2303 converter detected
[ 3984.249908] usb 2-2: pl2303 converter now attached to ttyUSB0
[ 3984.249948] usbcore: registered new interface driver pl2303
[ 3984.249954] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 5393.748124] e1000: eth0 NIC Link is Down
[ 5395.774375] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5403.788120] e1000: eth0 NIC Link is Down
[ 5405.792676] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control:
RX/TX
[ 5409.800124] e1000: eth0 NIC Link is Down
[ 5411.826380] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5423.848120] e1000: eth0 NIC Link is Down
[ 5427.877641] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5431.884122] e1000: eth0 NIC Link is Down
[ 5433.910373] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5532.104118] e1000: eth0 NIC Link is Down
[ 5534.108678] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control:
RX/TX
[ 5538.116126] e1000: eth0 NIC Link is Down
[ 5540.142369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5554.168122] e1000: eth0 NIC Link is Down
[ 5556.194374] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5560.200121] e1000: eth0 NIC Link is Down
[ 5562.226372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5586.272121] e1000: eth0 NIC Link is Down
[ 5588.276679] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control:
RX/TX
[ 5592.284121] e1000: eth0 NIC Link is Down
[ 5594.310383] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5608.336122] e1000: eth0 NIC Link is Down
[ 5610.362372] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 5616.372125] e1000: eth0 NIC Link is Down
[ 5618.398381] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 6829.536021] RPC: AUTH_GSS upcall timed out.
[ 6829.536024] Please check user daemon is running.
[ 7622.396124] e1000: eth0 NIC Link is Down
[ 7624.422369] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 7630.432126] e1000: eth0 NIC Link is Down
[ 7632.436684] e1000: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control:
RX/TX
[ 7636.444123] e1000: eth0 NIC Link is Down
[ 7638.470382] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 7650.492123] e1000: eth0 NIC Link is Down
[ 7652.518378] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 7658.528126] e1000: eth0 NIC Link is Down
[ 7660.554376] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX/TX
[ 7847.934573] RPC: AUTH_GSS upcall timed out.
[ 7847.934577] Please check user daemon is running.
[36449.993646] ip_tables: (C) 2000-2006 Netfilter Core Team
[37171.465274] BUG: unable to handle kernel paging request at 248c1729
[37171.468869] IP: [<c10cfaf7>] generic_fillattr+0x98/0x98
[37171.468869] *pdpt = 0000000018546001 *pde = 0000000000000000
[37171.468869] Oops: 0000 [#1] SMP
[37171.468869] Modules linked in: iptable_filter ip_tables x_tables pl2303
usbserial sha1_generic hmac cts des_generic autofs4 video ac power_supply
binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs lockd fscache auth_rpcgss nfs_acl
sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1
md_mod i82875p_edac edac_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss
snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq
snd_timer snd_seq_device pcspkr evdev snd soundcore snd_page_alloc iTCO_wdt
iTCO_vendor_support rng_core i2c_i801 parport_pc shpchp parport i2c_core
processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg
sd_mod crc_t10dif sr_mod cdrom thermal usb_storage ata_generic fan thermal_sys
floppy sata_sil ata_piix uhci_hcd libata firewire_ohci firewire_core crc_itu_t
e1000 ehci_hcd scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[37171.468869]
[37171.468869] Pid: 5730, comm: sed Not tainted 3.2.0-4-686-pae #1 Debian
3.2.41-2 /IC7/IC7-G(Intel i875P-ICH5)
[37171.468869] EIP: 0060:[<c10cfaf7>] EFLAGS: 00010282 CPU: 0
[37171.468869] EIP is at vfs_getattr+0x0/0x4c
[37171.468869] EAX: f4426080 EBX: f3f32580 ECX: d135bf64 EDX: e5492b98
[37171.468869] ESI: d135bf64 EDI: fffffff7 EBP: d135a000 ESP: d135bf4c
[37171.468869] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[37171.468869] Process sed (pid: 5730, ti=d135a000 task=f3f03560
task.ti=d135a000)
[37171.468869] Stack:
[37171.468869] c10cfbf1 00000000 00000003 b77d6890 00000003 c10cfdc9 f3f32580
00000003
[37171.468869] 00000020 c10cc0b7 f6cf5000 f3f32588 00000000 00000000 00000024
00000100
[37171.468869] 00000000 00000000 b77d3190 d135a000 c10cc0df 00000000 b77d3190
b77d6890
[37171.468869] Call Trace:
[37171.468869] [<c10cfbf1>] ? vfs_fstat+0x25/0x3b
[37171.468869] [<c10cfdc9>] ? sys_fstat64+0xe/0x21
[37171.468869] [<c10cc0b7>] ? do_sys_open+0xc3/0xcd
[37171.468869] [<c10cc0df>] ? sys_open+0x1e/0x23
[37171.468869] [<c12c2714>] ? syscall_call+0x7/0xb
[37171.468869] Code: 8b 48 44 8b 24 48 89 4a 38 89 5a 00 8b 88 ac 00 00 00 bb
01 24 00 00 d3 e3 89 5a 24 8b 58 54 8b 48 50 89 5a 8b 89 4a 44 5b 5e c3 <8b> 89
c5 57 56 53 89 d3 83 ec 08 8b 7a 20 89 0c 24 e8 2e 1f 05
[37171.468869] EIP: [<c10cfaf7>] vfs_getattr+0x0/0x4c SS:ESP 0068:d135bf4c
[37171.468869] CR2: 00000000248c1729
[37171.695154] ---[ end trace f8a1466a3d64352f ]---
** Model information
not available
** Loaded modules:
iptable_filter
ip_tables
x_tables
pl2303
usbserial
sha1_generic
hmac
cts
des_generic
autofs4
video
ac
power_supply
binfmt_misc
fuse
rpcsec_gss_krb5
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
reiserfs
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
raid1
md_mod
i82875p_edac
edac_core
snd_intel8x0
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
snd_seq_device
pcspkr
evdev
snd
soundcore
snd_page_alloc
iTCO_wdt
iTCO_vendor_support
rng_core
i2c_i801
parport_pc
shpchp
parport
i2c_core
processor
button
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
sg
sd_mod
crc_t10dif
sr_mod
cdrom
thermal
usb_storage
ata_generic
fan
thermal_sys
floppy
sata_sil
ata_piix
uhci_hcd
libata
firewire_ohci
firewire_core
crc_itu_t
e1000
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller
Hub [8086:2578] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller
[8086:2579] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to
CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f40fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to
I/O Memory Interface [8086:257e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00008000-00009fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: f3000000-f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at f4100400 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f4101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
02:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet
Controller [8086:1075]
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
03:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:03.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 8400 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at f2005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
03:09.0 VGA compatible controller [0300]: NVIDIA Corporation NV4 [RIVA TNT]
[10de:0020] (rev 04) (prog-if 00 [VGA controller])
Subsystem: STB Systems Inc Velocity 4400 [10b4:2740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f3000000 (32-bit, prefetchable) [size=16M]
[virtual] Expansion ROM at f0080000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 4146:4146 USBest Technology
Bus 002 Device 002: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial
Port [pl2303]
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.2 3.2.41-2
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae:
false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae:
true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/e1ubguo-0001od...@phobos.mars.org
