Package: src:linux Version: 3.2.39-2 Severity: important Tags: patch Somewhere last year there was a regression on the kernel UDF driver that was related with the handling of free space and used blocks on writable UDF filesystems (for example, my case involves a 2TB HDD formatted to UDF for cross-OS compatibility). This causes the following problems:
- du (most likely the basic 'stat' call) returns 0 for every file written on a UDF filesystem using this kernel - Windows 7 systems (which can also natively write to UDF filesystems) may think that the filesystem has no free space, therefore turning it read-only (but the FS can be fully written under Linux) - Some other errors may be lurking there, expecting to be revealed by a UDF filesystem validation tool (like the old Philips' UDF Conformance Testing Application), related with the file space allocation. This regression was fixed on the 3.4 kernel, here is the relevant patch: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fd4287dbc07763595c1e74edbb6520092290185c I highly suggest that this patch get backported to Wheezy 3.2 kernel, because this regression is very annoying for those expecting to use UDF as a fully- interoperable cross-OS filesystem. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=e4eb11e0-bfbb-4285-b7ba-be6de5863ed6 ro resume=/dev/sda4 resume_offset=208896 radeon.modeset=1 radeon.dynclks=1 ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 7.563293] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.564236] [drm] radeon: ib pool ready. [ 7.565515] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 7.566420] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 7.566492] radeon 0000:01:00.0: WB enabled [ 7.566542] [drm] fence driver on ring 0 use gpu addr 0x10000000 and cpu addr 0xffff8800baec1000 [ 7.566686] [drm] Loading R500 Microcode [ 7.642399] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 7.642444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7.956713] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.956918] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 8.068270] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.068345] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.068858] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 8.190289] platform radeon_cp.0: firmware: agent loaded radeon/R520_cp.bin into memory [ 8.190603] [drm] radeon: ring at 0x0000000010001000 [ 8.190689] [drm] ring test succeeded in 9 usecs [ 8.190920] [drm] ib test succeeded in 0 usecs [ 8.191409] [drm] Radeon Display Connectors [ 8.191463] [drm] Connector 0: [ 8.191511] [drm] VGA [ 8.191560] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 8.191619] [drm] Encoders: [ 8.191666] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.191716] [drm] Connector 1: [ 8.191763] [drm] LVDS [ 8.191813] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c [ 8.191871] [drm] Encoders: [ 8.191918] [drm] LCD1: INTERNAL_LVTM1 [ 8.191968] [drm] Connector 2: [ 8.192044] [drm] S-video [ 8.192105] [drm] Encoders: [ 8.192153] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 8.192229] [drm] radeon: power management initialized [ 8.362760] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input10 [ 8.363075] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-1.1/input0 [ 8.366731] input: 2-Axis,8-Button as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.0/input/input11 [ 8.367104] generic-usb 0003:0583:A000.0002: input,hidraw1: USB HID v1.10 Joystick [2-Axis,8-Button ] on usb-0000:00:1d.7-1.4/input0 [ 8.367189] usbcore: registered new interface driver usbhid [ 8.367243] usbhid: USB HID core driver [ 8.608142] cfg80211: World regulatory domain updated: [ 8.608195] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.608254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.608312] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.608369] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.608427] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.608485] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.662798] [drm] fb mappable at 0xD00C0000 [ 8.662851] [drm] vram apper at 0xD0000000 [ 8.662901] [drm] size 4096000 [ 8.662949] [drm] fb depth is 24 [ 8.662997] [drm] pitch is 5120 [ 8.663177] fbcon: radeondrmfb (fb0) is primary device [ 9.018266] Console: switching to colour frame buffer device 128x48 [ 9.022356] fb0: radeondrmfb frame buffer device [ 9.022397] drm: registered panic notifier [ 9.022449] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0 [ 12.241742] EXT4-fs (sda4): re-mounted. Opts: (null) [ 12.518952] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 12.691720] loop: module loaded [ 12.755804] i8k: unable to get SMM BIOS version [ 12.758248] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (d...@debian.org) [ 12.798278] scsi4 : vhba [ 13.540836] Adding 4718588k swap on /pagefile.sys. Priority:-1 extents:20 across:8577020k [ 13.910183] fuse init (API version 7.17) [ 16.163573] RPC: Registered named UNIX socket transport module. [ 16.165597] RPC: Registered udp transport module. [ 16.167552] RPC: Registered tcp transport module. [ 16.169474] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.251039] FS-Cache: Loaded [ 16.307991] FS-Cache: Netfs 'nfs' registered for caching [ 16.353319] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 18.906201] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 21.925789] lp: driver loaded but no devices found [ 21.965231] ppdev: user-space parallel port driver [ 28.094197] iwl3945 0000:0b:00.0: firmware: agent loaded iwlwifi-3945-2.ucode into memory [ 28.096667] iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9 [ 28.170993] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.277053] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.806090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.808515] Bluetooth: BNEP filters: protocol multicast [ 29.810959] Bluetooth: RFCOMM TTY layer initialized [ 29.813642] Bluetooth: RFCOMM socket layer initialized [ 29.816060] Bluetooth: RFCOMM ver 1.11 [ 31.816201] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex [ 31.818673] b44 ssb0:0: eth0: Flow control is off for TX and off for RX [ 31.822328] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.160071] eth0: no IPv6 routers present [ 50.116384] CE: hpet increased min_delta_ns to 20113 nsec [ 50.872488] CE: hpet increased min_delta_ns to 30169 nsec [ 51.000938] CE: hpet increased min_delta_ns to 45253 nsec [ 402.718091] UDF-fs: INFO Mounting volume 'SPICA_BK2TB', timestamp 2013/03/18 17:14 (1ef2) [ 2572.377159] UDF-fs: INFO Mounting volume 'SPICA_BK2TB', timestamp 2013/03/18 17:14 (1ef2) [ 2630.313676] CE: hpet increased min_delta_ns to 67879 nsec [ 2882.050316] UDF-fs: Partition marked readonly; forcing readonly mount [ 2882.079220] UDF-fs: INFO Mounting volume 'OLWINSHIT', timestamp 2013/01/13 15:18 (1ef2) [ 3448.150579] UDF-fs: INFO Mounting volume 'SPICA_BK2TB', timestamp 2013/03/18 17:14 (1ef2) [ 8709.627231] hrtimer: interrupt took 2069745 ns [15369.225424] CE: hpet increased min_delta_ns to 101818 nsec [33722.960882] CE: hpet increased min_delta_ns to 152727 nsec ** Model information sys_vendor: Dell Inc. product_name: MM061 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A14 board_vendor: Dell Inc. board_name: 0XD720 board_version: ** Loaded modules: nls_utf8 udf cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_conservative bnep rfcomm parport_pc ppdev lp parport binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc fuse vhba(O) i8k loop usbhid hid sr_mod cdrom snd_hda_codec_idt snd_hda_intel snd_hda_codec radeon snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm btusb bluetooth ttm snd_page_alloc drm_kms_helper snd_seq_midi snd_seq_midi_event drm arc4 joydev iwl3945 snd_rawmidi r852 sm_common iwl_legacy mac80211 snd_seq nand dell_laptop battery ac iTCO_wdt iTCO_vendor_support cfg80211 r592 nand_ecc nand_ids mtd memstick i2c_algo_bit i2c_i801 i2c_core power_supply snd_seq_device rfkill psmouse dell_wmi pcspkr video acpi_cpufreq dcdbas mperf snd_timer processor button snd soundcore sparse_keymap serio_raw evdev coretemp wmi ext4 crc16 jbd2 mbcache dm_mod usb_storage sg sd_mod crc_t10dif ata_generic b44 ssb firewire_ohci sdhci_pci firewire_core crc_itu_t thermal thermal_sys ata_piix uhci_hcd sdhci mmc_core mii pcmcia pcmcia_core libata ehci_hcd usbcore scsi_mod usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: efd00000-efefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: efc00000-efcfffff Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efa00000-efbfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: ef900000-ef9fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Radeon Mobility X1400 [1002:7145] (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:2003] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at ee00 [size=256] Region 2: Memory at efdf0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at efd00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Dell Inspiron 6400 [1028:01af] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) (prog-if 01) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r592 03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r852 0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at efcff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 003: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge Bus 001 Device 004: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge Bus 005 Device 002: ID 413c:8126 Dell Computer Corp. Wireless 355 Bluetooth Bus 001 Device 006: ID 046d:c05a Logitech, Inc. Optical Mouse M90 Bus 001 Device 007: ID 0583:a000 Padix Co., Ltd (Rockfire) MaxFire G-08XU Gamepad -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=es_VE.UTF-8, LC_CTYPE=es_VE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36+wheezy.1 pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130330183302.28647.2465.report...@tomman-lp-c2.tomman.net.ve
