Hi, We have recently encountered a similar problem with HP LTO5 drives deployed in a StorageTek SL8500 library. Tapes to which we had previously written labels for use by our backup software (TSM) are now unreadable, even when using dd. The kernel errors reported are nearly identical to those you report.
You posted your problem two years ago, so I'm hopeful you found a solution. Any insight you can provide will be much appreciated by me and others here. Thanks, Chance On Monday, May 30, 2011 7:50:02 PM UTC-7, AJ Guillon wrote: > Package: linux-2.6 > Version: 2.6.32-34squeeze1 > Severity: normal > > > I have a Quantum LTO-4 tape drive connected to an ASC-1045 controller. The > kernel logs included do show the nature of the problem I have encountered. > > I am writing data to / from the tape drive using dd, like so: > > dd if=/dev/nst0 of=file bs=32K > > This causes the messages you see below. The tape drive will become unusable, > and I have no choice but to do a cold boot to restore access to the > device, otherwise I get "device busy" messages. I have attempted to use the > "official" adaptec drivers for this card, and get the same result as > when I use mvsas. I am not sure if this problem is a hardware issue (I > suspect not, since sometimes things work) or a software issue. I am able to > send some data to the tape drive, and read some data... the problem has been > very difficult for me to narrow down. > > The information attached to this particular bug report comes from an attempt > to use the Adaptec driver, which is not part of Debian, but identical > messages are generated with the mvsas module. > > > -- Package-specific info: > ** Version: > Linux version 2.6.32-5-amd64 (Debian 2.6.32-34squeeze1) (da...@debian.org) > (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 23:13:22 UTC 2011 > > ** Command line: > BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 > root=/dev/mapper/virtualmachines-virtualserver--root ro quiet > > ** Not tainted > > ** Kernel log: > [ 482.176432] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 482.176438] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 482.176443] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 482.176446] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 482.176453] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 482.176456] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 482.176460] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 482.176465] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 482.176467] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 482.176471] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > [ 602.176047] INFO: task dd:2388 blocked for more than 120 seconds. > [ 602.176165] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables > this message. > [ 602.176318] dd D ffff88081d2bd4c0 0 2388 2387 0x00000000 > [ 602.176321] ffff88081d2bd4c0 0000000000000086 0000000000000000 > ffffffff8118314f > [ 602.176325] 0000008000000020 0000000000000fe0 000000000000f9e0 > ffff88081cb31fd8 > [ 602.176328] 0000000000015780 0000000000015780 ffff88081d2bdbd0 > ffff88081d2bdec8 > [ 602.176331] Call Trace: > [ 602.176337] [<ffffffff8118314f>] ? blk_rq_map_sg+0x140/0x289 > [ 602.176349] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 602.176353] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 602.176357] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 602.176359] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 602.176364] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 602.176367] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 602.176371] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 602.176374] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 602.176377] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 602.176380] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > [ 722.176069] INFO: task dd:2388 blocked for more than 120 seconds. > [ 722.176188] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables > this message. > [ 722.176341] dd D ffff88081d2bd4c0 0 2388 1 0x00000004 > [ 722.176346] ffff88081d2bd4c0 0000000000000086 0000000000000000 > ffffffff8118314f > [ 722.176349] 0000008000000020 0000000000000fe0 000000000000f9e0 > ffff88081cb31fd8 > [ 722.176352] 0000000000015780 0000000000015780 ffff88081d2bdbd0 > ffff88081d2bdec8 > [ 722.176355] Call Trace: > [ 722.176363] [<ffffffff8118314f>] ? blk_rq_map_sg+0x140/0x289 > [ 722.176379] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 722.176385] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 722.176389] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 722.176392] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 722.176397] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 722.176401] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 722.176404] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 722.176409] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 722.176412] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 722.176415] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > [ 842.176106] INFO: task dd:2388 blocked for more than 120 seconds. > [ 842.176225] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables > this message. > [ 842.176378] dd D ffff88081d2bd4c0 0 2388 1 0x00000004 > [ 842.176383] ffff88081d2bd4c0 0000000000000086 0000000000000000 > ffffffff8118314f > [ 842.176387] 0000008000000020 0000000000000fe0 000000000000f9e0 > ffff88081cb31fd8 > [ 842.176390] 0000000000015780 0000000000015780 ffff88081d2bdbd0 > ffff88081d2bdec8 > [ 842.176393] Call Trace: > [ 842.176402] [<ffffffff8118314f>] ? blk_rq_map_sg+0x140/0x289 > [ 842.176423] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 842.176429] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 842.176433] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 842.176436] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 842.176442] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 842.176446] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 842.176449] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 842.176454] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 842.176457] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 842.176460] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > [ 962.176123] INFO: task dd:2388 blocked for more than 120 seconds. > [ 962.176242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables > this message. > [ 962.176395] dd D ffff88081d2bd4c0 0 2388 1 0x00000004 > [ 962.176400] ffff88081d2bd4c0 0000000000000086 0000000000000000 > ffffffff8118314f > [ 962.176404] 0000008000000020 0000000000000fe0 000000000000f9e0 > ffff88081cb31fd8 > [ 962.176407] 0000000000015780 0000000000015780 ffff88081d2bdbd0 > ffff88081d2bdec8 > [ 962.176410] Call Trace: > [ 962.176420] [<ffffffff8118314f>] ? blk_rq_map_sg+0x140/0x289 > [ 962.176443] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 962.176449] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 962.176453] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 962.176456] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 962.176462] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 962.176466] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 962.176469] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 962.176474] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 962.176477] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 962.176481] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > [ 1082.176075] INFO: task dd:2388 blocked for more than 120 seconds. > [ 1082.176194] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables > this message. > [ 1082.176347] dd D ffff88081d2bd4c0 0 2388 1 0x00000004 > [ 1082.176351] ffff88081d2bd4c0 0000000000000086 0000000000000000 > ffffffff8118314f > [ 1082.176355] 0000008000000020 0000000000000fe0 000000000000f9e0 > ffff88081cb31fd8 > [ 1082.176358] 0000000000015780 0000000000015780 ffff88081d2bdbd0 > ffff88081d2bdec8 > [ 1082.176361] Call Trace: > [ 1082.176370] [<ffffffff8118314f>] ? blk_rq_map_sg+0x140/0x289 > [ 1082.176390] [<ffffffffa0036671>] ? scsi_init_sgtable+0x3f/0x5a [scsi_mod] > [ 1082.176396] [<ffffffff812fb3b5>] ? schedule_timeout+0x2e/0xdd > [ 1082.176401] [<ffffffff8117ecde>] ? blk_peek_request+0x18b/0x19f > [ 1082.176404] [<ffffffff812fb26c>] ? wait_for_common+0xde/0x15b > [ 1082.176410] [<ffffffff8104a440>] ? default_wake_function+0x0/0x9 > [ 1082.176413] [<ffffffffa013a079>] ? st_do_scsi+0x2c4/0x2f4 [st] > [ 1082.176417] [<ffffffffa013d5b2>] ? st_read+0x38a/0x8cf [st] > [ 1082.176422] [<ffffffff810ef538>] ? vfs_read+0xa6/0xff > [ 1082.176425] [<ffffffff810ef64d>] ? sys_read+0x45/0x6e > [ 1082.176428] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b > > ** Model information > sys_vendor: System manufacturer > product_name: System Product Name > product_version: System Version > chassis_vendor: Chassis Manufacture > chassis_version: Chassis Version > bios_vendor: American Megatrends Inc. > bios_version: 0902 > board_vendor: ASUSTeK Computer INC. > board_name: KGP(M)E-D16 > board_version: Rev 1.xxG > > ** Loaded modules: > Module Size Used by > st 30916 2 > asc1xx5 31081 1 > ip6table_filter 2384 0 > ip6_tables 15107 1 ip6table_filter > ebtable_nat 1588 0 > ebtables 13933 1 ebtable_nat > ipt_REJECT 1953 2 > xt_tcpudp 2319 4 > iptable_filter 2258 1 > ip_tables 13915 1 iptable_filter > x_tables 12845 5 > ip6_tables,ebtables,ipt_REJECT,xt_tcpudp,ip_tables > kvm_amd 31862 0 > kvm 214152 1 kvm_amd > fuse 50940 1 > bridge 39662 0 > stp 1440 1 bridge > ext2 52937 1 > loop 11799 0 > firewire_sbp2 11530 0 > snd_pcm 60503 0 > snd_timer 15582 1 snd_pcm > snd 46542 2 snd_pcm,snd_timer > soundcore 4598 1 snd > snd_page_alloc 6265 1 snd_pcm > osst 45333 0 > k10temp 2715 0 > i2c_piix4 8328 0 > edac_core 29261 0 > i2c_core 15835 1 i2c_piix4 > edac_mce_amd 6449 0 > evdev 7352 3 > joydev 8459 0 > pcspkr 1699 0 > container 2389 0 > button 4650 0 > processor 29951 0 > ext4 288478 2 > mbcache 5050 2 ext2,ext4 > jbd2 67079 1 ext4 > crc16 1319 1 ext4 > dm_mod 53754 9 > sg 24085 0 > sr_mod 12602 0 > firewire_ohci 19692 0 > cdrom 29415 1 sr_mod > ses 5144 0 > sd_mod 29937 4 > enclosure 5519 1 ses > crc_t10dif 1276 1 sd_mod > ata_generic 3047 0 > usbhid 33324 0 > hid 63273 1 usbhid > ahci 32534 0 > ohci_hcd 19359 0 > firewire_core 36880 2 firewire_sbp2,firewire_ohci > libsas 35528 1 asc1xx5 > ehci_hcd 32129 0 > pata_atiixp 3505 0 > aacraid 64448 3 > usbcore 122450 4 usbhid,ohci_hcd,ehci_hcd > scsi_transport_sas 19881 2 asc1xx5,libsas > crc_itu_t 1307 1 firewire_core > libata 133680 4 ata_generic,ahci,libsas,pata_atiixp > nls_base 6377 1 usbcore > thermal 11674 0 > scsi_mod 126597 12 > st,asc1xx5,firewire_sbp2,osst,sg,sr_mod,ses,sd_mod,libsas,aacraid,scsi_transport_sas,libata > e1000e 110111 0 > thermal_sys 11942 2 processor,thermal > > ** PCI devices: > 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only dual > slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02) > Subsystem: ASUSTeK Computer Inc. Device [1043:8448] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port B) [1002:5a16] (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Memory behind bridge: fbd00000-fbffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fbc00000-fbcfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge > (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fbb00000-fbbfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:0c.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:5a20] (prog-if > 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: fba00000-fbafffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA > Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 22 > Region 0: I/O ports at a000 [size=8] > Region 1: I/O ports at 9000 [size=4] > Region 2: I/O ports at 8000 [size=8] > Region 3: I/O ports at 7000 [size=4] > Region 4: I/O ports at 6000 [size=16] > Region 5: Memory at faffe400 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ahci > > 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at faff6000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 > Controller [1002:4398] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at faff7000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at faffe800 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 > Controller [1002:4398] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at faffd000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 19 > Region 0: Memory at faffec00 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > > 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] > (rev 3d) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel driver in use: piix4_smbus > > 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller > [1002:439c] (prog-if 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ff00 [size=16] > Capabilities: <access denied> > Kernel driver in use: pata_atiixp > > 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host > controller [1002:439d] > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge > [1002:4384] (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: fb000000-fb9fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 > Controller [1002:4399] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:844b] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fafff000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > HyperTransport Configuration [1022:1200] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Address Map [1022:1201] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > DRAM Controller [1022:1202] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Miscellaneous Control [1022:1203] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel driver in use: k10temp > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Link Control [1022:1204] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > HyperTransport Configuration [1022:1200] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Address Map [1022:1201] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > DRAM Controller [1022:1202] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > > 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Miscellaneous Control [1022:1203] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel driver in use: k10temp > > 00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor > Link Control [1022:1204] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 01:01.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED > Graphics Family [1a03:2000] (rev 10) (prog-if 00 [VGA controller]) > Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=8M] > Region 1: Memory at fb9c0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at bc00 [size=128] > Expansion ROM at <unassigned> [disabled] > Capabilities: <access denied> > > 01:02.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev > 70) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device [1043:8259] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at fb9ff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: firewire_ohci > > 02:00.0 Serial Attached SCSI controller [0107]: Adaptec ASC-1405 Unified > Serial HBA [9005:0450] (rev 02) > Subsystem: Marvell Technology Group Ltd. Device [11ab:6440] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 36 > Region 2: I/O ports at cc00 [size=128] > Region 4: Memory at fbaff000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at fba80000 [disabled] [size=256K] > Capabilities: <access denied> > Kernel driver in use: asc1xx5 > > 03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network > Connection [8086:10d3] > Subsystem: ASUSTeK Computer Inc. Device [1043:8369] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 47 > Region 0: Memory at fbbe0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at dc00 [size=32] > Region 3: Memory at fbbdc000 (32-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: e1000e > > 04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network > Connection [8086:10d3] > Subsystem: ASUSTeK Computer Inc. Device [1043:8369] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 48 > Region 0: Memory at fbce0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at ec00 [size=32] > Region 3: Memory at fbcdc000 (32-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: e1000e > > 05:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09) > Subsystem: Adaptec ASR-2805 [9005:02d7] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 24 > Region 0: Memory at fbe00000 (64-bit, non-prefetchable) [size=2M] > Expansion ROM at fbd80000 [disabled] [size=512K] > Capabilities: <access denied> > Kernel driver in use: aacraid > > > ** USB devices: > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 003: ID 046b:ff10 American Megatrends, Inc. > Bus 003 Device 002: ID 046b:ff01 American Megatrends, Inc. > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: 6.0.1 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.32-5-amd64 (SMP w/12 CPU cores) > Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-2.6.32-5-amd64 depends on: > ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management > sy > ii initramfs-tools [linux 0.98.8 tools for generating an initramfs > ii linux-base 2.6.32-34squeeze1 Linux image base package > ii module-init-tools 3.12-1 tools for managing Linux kernel > mo > > Versions of packages linux-image-2.6.32-5-amd64 recommends: > pn firmware-linux-free <none> (no description available) > > Versions of packages linux-image-2.6.32-5-amd64 suggests: > pn grub | lilo <none> (no description available) > pn linux-doc-2.6.32 <none> (no description available) > > Versions of packages linux-image-2.6.32-5-amd64 is related to: > pn firmware-bnx2 <none> (no description available) > pn firmware-bnx2x <none> (no description available) > pn firmware-ipw2x00 <none> (no description available) > pn firmware-ivtv <none> (no description available) > pn firmware-iwlwifi <none> (no description available) > pn firmware-linux <none> (no description available) > pn firmware-linux-nonfree <none> (no description available) > pn firmware-qlogic <none> (no description available) > pn firmware-ralink <none> (no description available) > pn xen-hypervisor <none> (no description available) > > -- debconf information: > linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: > linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: > false > linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: > true > linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: > > > > -- > To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/87fe1058-6b1e-409d-97df-a5154f051...@googlegroups.com
