Package: src:linux
Version: 3.8-1~experimental.1
Severity: normal
My / is on a LVM volume. Kernel 3.8 logs 'Volume group "ssd" not found'
and "/dev/mapper/ssd-debian not found" on startup and drops me in the
initramfs shell. The LVM pv, vg and lv are visible in lvm just fine, but
the logical volume is not activated and thus not accessible to the
system.
(initramfs) lvm
lvm> lvchange -a y ssd/debian
fixes the problem.
This works fine in 3.2.0-4 and 3.7-trunk. initrd has the same timestamp
for both 3.7 and 3.8.
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version
4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/ssd-debian ro quiet
** Not tainted
** Kernel log:
[ 61.613603] [drm] vram apper at 0xD0000000
[ 61.613605] [drm] size 9216000
[ 61.613606] [drm] fb depth is 24
[ 61.613607] [drm] pitch is 7680
[ 61.614157] fbcon: radeondrmfb (fb0) is primary device
[ 61.646082] EDAC MC: Ver: 3.0.0
[ 61.646931] MCE: In-kernel MCE decoding enabled.
[ 61.647184] AMD64 EDAC driver v3.4.0
[ 61.647217] EDAC amd64: DRAM ECC disabled.
[ 61.647245] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 61.647245] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 61.647245] (Note that use of the override may cause unknown side effects.)
[ 61.649277] usb 3-1: USB disconnect, device number 2
[ 61.657686] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 61.658573] microcode: CPU0: patch_level=0x00000000
[ 61.779384] usbcore: registered new interface driver snd-usb-audio
[ 61.780823] platform microcode: firmware: agent aborted loading
amd-ucode/microcode_amd.bin (not found?)
[ 61.780864] microcode: CPU1: patch_level=0x00000000
[ 61.780960] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 61.781660] acpi-cpufreq: overriding BIOS provided _PSD data
[ 61.812876] usb 3-3: USB disconnect, device number 3
[ 61.815117] scsi 8:0:0:3: rejecting I/O to offline device
[ 61.815122] scsi 8:0:0:3: killing request
[ 61.839106] Console: switching to colour frame buffer device 240x75
[ 61.848313] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 61.848315] radeon 0000:01:00.0: registered panic notifier
[ 61.849297] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on
minor 0
[ 61.854548] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 61.854628] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 61.865763] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input7
[ 61.900496] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
[ 62.132090] usb 6-4: new high-speed USB device number 3 using ehci-pci
[ 62.264167] usb 6-4: New USB device found, idVendor=0424, idProduct=2514
[ 62.264180] usb 6-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 62.264633] hub 6-4:1.0: USB hub found
[ 62.264776] hub 6-4:1.0: 4 ports detected
[ 62.487275] usb 7-3: new high-speed USB device number 3 using ehci-pci
[ 62.621222] usb 7-3: New USB device found, idVendor=058f, idProduct=6362
[ 62.621235] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 62.621243] usb 7-3: Product: Mass Storage Device
[ 62.621249] usb 7-3: Manufacturer: Generic
[ 62.621255] usb 7-3: SerialNumber: 058F312D81B
[ 62.622045] scsi9 : usb-storage 7-3:1.0
[ 62.882273] usb 1-3: new low-speed USB device number 3 using ohci_hcd
[ 63.050970] usb 1-3: New USB device found, idVendor=046d, idProduct=c062
[ 63.050983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 63.050992] usb 1-3: Product: USB Laser Mouse
[ 63.050999] usb 1-3: Manufacturer: Logitech
[ 63.060665] input: Logitech USB Laser Mouse as
/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/input/input8
[ 63.061085] hid-generic 0003:046D:C062.0007: input,hidraw0: USB HID v1.10
Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-3/input0
[ 63.257546] usb 6-4.3: new full-speed USB device number 4 using ehci-pci
[ 63.355516] usb 6-4.3: New USB device found, idVendor=046d, idProduct=0a0b
[ 63.355524] usb 6-4.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 63.355528] usb 6-4.3: Product: Logitech USB Headset
[ 63.355531] usb 6-4.3: Manufacturer: Logitech
[ 63.363764] input: Logitech Logitech USB Headset as
/devices/pci0000:00/0000:00:12.2/usb6/6-4/6-4.3/6-4.3:1.3/input/input9
[ 63.364048] hid-generic 0003:046D:0A0B.0008: input,hidraw1: USB HID v1.00
Device [Logitech Logitech USB Headset] on usb-0000:00:12.2-4.3/input3
[ 63.496770] usb 3-1: new full-speed USB device number 4 using ohci_hcd
[ 63.573004] Adding 4194300k swap on /dev/mapper/ssd-swap. Priority:0
extents:1 across:4194300k SS
[ 63.617247] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 63.617865] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 63.618482] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 63.619099] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 63.620698] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 63.621144] sd 9:0:0:1: Attached scsi generic sg4 type 0
[ 63.621584] sd 9:0:0:2: Attached scsi generic sg5 type 0
[ 63.622126] sd 9:0:0:3: Attached scsi generic sg6 type 0
[ 63.626483] EXT4-fs (dm-12): mounted filesystem with ordered data mode.
Opts: discard
[ 63.628588] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 63.629944] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 63.630693] sd 9:0:0:2: [sde] Attached SCSI removable disk
[ 63.631311] sd 9:0:0:3: [sdf] Attached SCSI removable disk
[ 63.669436] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 63.669441] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 63.669444] usb 3-1: Product: USB Receiver
[ 63.669445] usb 3-1: Manufacturer: Logitech
[ 63.691548] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw2: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
[ 63.696747] input: Logitech Unifying Device. Wireless PID:101a as
/devices/pci0000:00/0000:00:13.0/usb3/3-1/3-1:1.2/0003:046D:C52B.000B/input/input10
[ 63.696892] logitech-djdevice 0003:046D:C52B.000C: input,hidraw3: USB HID
v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on
usb-0000:00:13.0-1:1
[ 63.906695] RPC: Registered named UNIX socket transport module.
[ 63.906699] RPC: Registered udp transport module.
[ 63.906700] RPC: Registered tcp transport module.
[ 63.906701] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 63.914887] FS-Cache: Loaded
[ 63.915073] Key type dns_resolver registered
[ 63.920090] FS-Cache: Netfs 'nfs' registered for caching
[ 63.934031] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 64.363700] lp: driver loaded but no devices found
[ 64.370271] ppdev: user-space parallel port driver
[ 64.881058] Ebtables v2.0 registered
[ 64.888277] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.908292] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 64.991474] cgroup: libvirtd (1806) created nested cgroup for controller
"devices" which has incomplete hierarchy support. Nested cgroups may change
behavior in the future.
[ 64.991519] cgroup: libvirtd (1806) created nested cgroup for controller
"blkio" which has incomplete hierarchy support. Nested cgroups may change
behavior in the future.
[ 65.030459] r8169 0000:04:00.0 eth0: link down
[ 65.030471] r8169 0000:04:00.0 eth0: link down
[ 65.030700] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.149169] Bridge firewalling registered
[ 67.233593] r8169 0000:04:00.0 eth0: link up
[ 67.233615] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P1.50
board_vendor: ASRock
board_name: A780FullHD
board_version:
** Loaded modules:
bridge
stp
llc
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
binfmt_misc
parport_pc
ppdev
lp
parport
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
snd_hda_codec_hdmi
acpi_cpufreq
mperf
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
microcode
pcspkr
edac_mce_amd
k10temp
edac_core
evdev
sp5100_tco
loop
i2c_piix4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
kvm_amd
kvm
snd_timer
radeon
wmi
ttm
button
drm_kms_helper
processor
thermal_sys
snd
drm
ehci_pci
i2c_algo_bit
i2c_core
soundcore
autofs4
ext4
crc16
jbd2
mbcache
uhci_hcd
usb_storage
hid_logitech_dj
sg
sr_mod
cdrom
sd_mod
crc_t10dif
dm_mod
hid_generic
usbhid
hid
ata_generic
pata_atiixp
ahci
libahci
libata
scsi_mod
ohci_hcd
ehci_hcd
usbcore
usb_common
r8169
mii
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge
[1022:9600]
Subsystem: ASRock Incorporation Device [1849:9600]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe000000-feafffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fcefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fcf00000-00000000fcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI
1.0])
Subsystem: ASRock Incorporation Device [1849:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fdeff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdefd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdefc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdef7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fdef6800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 3a)
Subsystem: ASRock Incorporation Device [1849:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:439c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ASRock Incorporation Device [1849:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdef5000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
Manhattan [Mobility Radeon HD 5430 Series] [1002:68e1] (prog-if 00 [VGA
controller])
Subsystem: Hightech Information System Ltd. Device [1787:3000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Cedar HDMI
Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: Hightech Information System Ltd. Device [1787:aa68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at fdfbc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fcfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fcfe0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 003: ID 046d:c062 Logitech, Inc. LS1 Laser Mouse, corded
Bus 003 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 006 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 007 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.8-trunk-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-trunk-amd64/prerm/removing-running-kernel-3.8-trunk-amd64:
true
linux-image-3.8-trunk-amd64/postinst/depmod-error-initrd-3.8-trunk-amd64:
false
* linux-image-3.8-trunk-amd64/postinst/missing-firmware-3.8-trunk-amd64:
linux-image-3.8-trunk-amd64/postinst/ignoring-ramdisk:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130306184536.2765.64316.report...@pest.krs8.birkenwald.de
