On 02/24/13 01:15, Jonathan Nieder wrote:
Thomas D. Dean wrote:
tomdean wrote:
The b43 driver installed at boot does not work. I have included a
work around.
I installed the b43 driver from compat-drivers-3.7.6-1 and it works.
[...]
sudo update-initramfs -u
Fixed the problem.
Um, do you mean that when installing squeeze on your hardware:
1. The b43 driver does not work out of the box
2. Running "sudo update-initramfs -u" is enough to get it working
3. An alternative way to get it working is to install the b43 driver
from compat-drivers
?
In any case, please attach output from
"reportbug --template linux-image-$(uname -r)". It is useful context.
Puzzled,
Jonathan
Include network configuration and status from this computer?
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: tomdean <tomd...@speakeasy.org>
To: Debian Bug Tracking System <sub...@bugs.debian.org>
Subject: none
X-Debbugs-Cc: tomd...@speakeasy.org
Package: linux-2.6
Version: 2.6.32-46
Severity: wishlist
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-46) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 09:49:36 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=ee88c460-9819-4828-94f2-9ef39ae70c16 ro quiet
** Not tainted
** Kernel log:
[ 8.309650] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 8.309678] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 8.309969] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 8.310829] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 0
[ 8.310839] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 8.310846] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 8.381046] intel8x0_measure_ac97_clock: measured 54026 usecs (2603 samples)
[ 8.381052] intel8x0: clocking to 48000
[ 8.383428] Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 8.383455] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 8.388490] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 8.494451] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 8.494517] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 8.496836] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder
(output 0)
[ 8.496843] [drm] nouveau 0000:01:00.0: Calling LVDS script 1:
[ 8.496848] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 8.496852] [drm] nouveau 0000:01:00.0: 0xDD31: Parsing digital output
script table
[ 8.736045] MC'97 0 converters and GPIO not ready (0x1)
[ 9.000047] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder
(output 1)
[ 9.000055] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder
(output 2)
[ 9.092245] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x49000, bo
d7b52600
[ 9.104477] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1
using output A
[ 9.104481] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[ 9.104485] [drm] nouveau 0000:01:00.0: 0xDE4E: Parsing digital output
script table
[ 9.160028] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder
(output 0)
[ 9.160031] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[ 9.160035] [drm] nouveau 0000:01:00.0: 0xDD1A: Parsing digital output
script table
[ 9.160046] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1
using output A
[ 9.164195] Console: switching to colour frame buffer device 180x56
[ 9.168345] fb0: nouveaufb frame buffer device
[ 9.168348] registered panic notifier
[ 9.168355] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on
minor 0
[ 9.672085] Adding 1004020k swap on /dev/sda7. Priority:-1 extents:1
across:1004020k
[ 10.265197] EXT3 FS on sda1, internal journal
[ 10.445029] loop: module loaded
[ 12.609711] kjournald starting. Commit interval 5 seconds
[ 12.609978] EXT3 FS on sda9, internal journal
[ 12.609985] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.647497] kjournald starting. Commit interval 5 seconds
[ 12.647736] EXT3 FS on sda8, internal journal
[ 12.647742] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.695301] kjournald starting. Commit interval 5 seconds
[ 12.695560] EXT3 FS on sda5, internal journal
[ 12.695566] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.732744] kjournald starting. Commit interval 5 seconds
[ 12.732997] EXT3 FS on sda6, internal journal
[ 12.733005] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.932069] b43-phy0: dea29de4
[ 14.997538] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.260348] wlan0: authenticate with 08:86:3b:d6:f5:c8
[ 17.272169] wlan0: send auth to 08:86:3b:d6:f5:c8 (try 1/3)
[ 17.273657] wlan0: authenticated
[ 17.277015] wlan0: associate with 08:86:3b:d6:f5:c8 (try 1/3)
[ 17.279563] wlan0: RX AssocResp from 08:86:3b:d6:f5:c8 (capab=0x411 status=0
aid=2)
[ 17.280128] wlan0: associated
[ 17.280178] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.662555] padlock: VIA PadLock not detected.
[ 17.813927] wlan0: IPv6 duplicate address fe80::290:4bff:fe52:828a detected!
[ 19.958268] fuse init (API version 7.13)
[ 21.934467] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input9
[ 23.854830] apm: BIOS not found.
[ 25.093623] Bluetooth: Core ver 2.15
[ 25.094163] NET: Registered protocol family 31
[ 25.094168] Bluetooth: HCI device and connection manager initialized
[ 25.094175] Bluetooth: HCI socket layer initialized
[ 25.363058] Bluetooth: L2CAP ver 2.14
[ 25.363064] Bluetooth: L2CAP socket layer initialized
[ 25.472642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.472647] Bluetooth: BNEP filters: protocol multicast
[ 25.649076] Bluetooth: RFCOMM TTY layer initialized
[ 25.649086] Bluetooth: RFCOMM socket layer initialized
[ 25.649090] Bluetooth: RFCOMM ver 1.11
[ 25.694558] Bridge firewalling registered
[ 25.782008] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.782013] Bluetooth: SCO socket layer initialized
[ 27.165570] lp0: using parport0 (interrupt-driven).
[ 27.193035] ppdev: user-space parallel port driver
[ 27.283081] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 27.283915] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 38.573460] CPU0 attaching NULL sched-domain.
[ 38.573472] CPU1 attaching NULL sched-domain.
[ 38.588183] CPU0 attaching sched-domain:
[ 38.588192] domain 0: span 0-1 level SIBLING
[ 38.588198] groups: group c1c0370c cpus 0 (cpu_power = 589) group c1e0370c
cpus 1 (cpu_power = 589)
[ 38.588212] domain 1: span 0-1 level MC
[ 38.588217] groups: group c1c03778 cpus 0-1 (cpu_power = 1178)
[ 38.588229] CPU1 attaching sched-domain:
[ 38.588233] domain 0: span 0-1 level SIBLING
[ 38.588238] groups: group c1e0370c cpus 1 (cpu_power = 589) group c1c0370c
cpus 0 (cpu_power = 589)
[ 38.588251] domain 1: span 0-1 level MC
[ 38.588255] groups: group c1c03778 cpus 0-1 (cpu_power = 1178)
[ 229.967313] synaptics: using relaxed packet validation
[ 3932.272449] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder
(output 0)
[ 3932.272456] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
[ 3932.272461] [drm] nouveau 0000:01:00.0: 0xDD31: Parsing digital output
script table
[43551.879637] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder
(output 0)
[43551.879643] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
[43551.879648] [drm] nouveau 0000:01:00.0: 0xDE4E: Parsing digital output
script table
[43551.936021] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
[43551.936026] [drm] nouveau 0000:01:00.0: 0xDD1A: Parsing digital output
script table
** Model information
not available
** Loaded modules:
Module Size Used by
speedstep_lib 2468 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_stats 1997 0
ppdev 4058 0
lp 5570 0
sco 5885 2
bridge 33031 0
stp 996 1 bridge
rfcomm 25199 0
bnep 7452 2
l2cap 21721 6 rfcomm,bnep
crc16 1027 1 l2cap
bluetooth 36319 6 sco,rfcomm,bnep,l2cap
binfmt_misc 4907 1
uinput 4796 1
fuse 44268 1
aes_i586 6816 2
aes_generic 25738 1 aes_i586
loop 9769 0
firewire_sbp2 9647 0
snd_intel8x0m 8100 0
nouveau 314900 2
snd_intel8x0 19595 1
snd_ac97_codec 79136 2 snd_intel8x0m,snd_intel8x0
ttm 33394 1 nouveau
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec
drm_kms_helper 18569 1 nouveau
snd_seq 35463 0
yenta_socket 16403 1
arc4 974 2
drm 112621 4 nouveau,ttm,drm_kms_helper
snd_timer 12270 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
rsrc_nonstatic 7057 1 yenta_socket
i2c_algo_bit 3493 1 nouveau
parport_pc 15799 1
b43 304365 0
joydev 6739 0
mac80211 200094 1 b43
cfg80211 129454 2 b43,mac80211
rfkill 10264 4 bluetooth,cfg80211
bcma 19969 1 b43
compat_firmware_class 4329 1 b43
shpchp 21200 0
parport 22554 3 ppdev,lp,parport_pc
i2c_i801 6462 0
rng_core 2178 1 b43
snd 34423 9
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_core 12803 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
pci_hotplug 18545 1 shpchp
psmouse 44837 0
evdev 5609 16
container 1833 0
soundcore 3450 1 snd
serio_raw 2916 0
pcspkr 1207 0
battery 3782 0
processor 26327 1
ac 1640 0
button 3598 1 nouveau
wmi 3575 0
irda 75956 0
snd_page_alloc 5045 3 snd_intel8x0m,snd_intel8x0,snd_pcm
crc_ccitt 1039 1 irda
video 14605 0
output 1204 1 video
ext3 94396 5
jbd 32401 1 ext3
mbcache 3762 1 ext3
usbhid 28016 0
hid 50909 1 usbhid
sg 19937 0
sd_mod 26013 7
sr_mod 10770 0
crc_t10dif 1012 1 sd_mod
cdrom 26435 1 sr_mod
ata_generic 2247 0
ssb 36193 1 b43
cb710_mmc 4765 0
8139too 14949 0
ata_piix 17736 6
compat 18659 6
b43,mac80211,cfg80211,bcma,compat_firmware_class,ssb
led_class 1757 2 b43,compat
uhci_hcd 16057 0
firewire_ohci 16725 0
mmc_core 38685 3 b43,ssb,cb710_mmc
libata 115869 2 ata_generic,ata_piix
pcmcia 16194 2 b43,ssb
thermal 9206 0
pcmcia_core 20450 4 yenta_socket,rsrc_nonstatic,compat,pcmcia
firewire_core 31243 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
8139cp 13421 0
mii 2714 2 8139too,8139cp
cb710 3348 1 cb710_mmc
scsi_mod 105001 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
ehci_hcd 28689 0
thermal_sys 9378 3 processor,video,thermal
usbcore 99426 5 usbhid,compat,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller
[8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=80
Memory behind bridge: d1000000-d1ffffff
Prefetchable memory behind bridge: e0000000-efffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface [8086:2576] (rev ff) (prog-if ff)
!!! Unknown header type 7f
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1cc0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1ce0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d2000000-d23fffff
Prefetchable memory behind bridge: 20000000-23ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 2040 [size=16]
Region 5: Memory at 24000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:006a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1400 [size=256]
Region 1: I/O ports at 1c80 [size=64]
Region 2: Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Modem
Controller [8086:24d6] (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1800 [size=256]
Region 1: I/O ports at 1c00 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34M [GeForce FX
Go5200 64M] [10de:0324] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Pavillon ZD7000 laptop [103c:006a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 40 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at d2007800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
02:01.0 CardBus bridge [0607]: ENE Technology Inc CB-710/2/4 Cardbus Controller
[1524:1411] (rev 02)
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:01.1 FLASH memory [0501]: ENE Technology Inc CB710 Memory Card Reader
Controller [1524:0510]
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 3c00 [size=128]
Capabilities: <access denied>
Kernel driver in use: cb710
02:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company NX9500 [103c:006a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d2007000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Hewlett-Packard Company Broadcom 802.11b/g WLAN [103c:12f4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d2004000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=ANSI_X3.4-1968)
(ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-46 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.3-4 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
