Package: src:linux Version: 3.2.35-2 Severity: normal Due to BIOS issues, a lot of systems advertise several HDMI pins even though physically only one is reachable. In my case, a LC2131 (SP13R) laptop shows the following available pins:
$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Fortunately, there's a way to disable the unused HDMI pins using a feature called early patching described here: http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio.txt In my case I did this: I created a file containing below in /lib/firmware, such as, /lib/firmware/ibx-hdmi: ================================================================ [codec] 0x80862804 0x80860101 3 [pincfg] 0x04 0x411111f0 0x06 0x411111f0 ================================================================ Now pass this file to "patch" module option for snd-hda-intel. For example, create a file in /etc/modprobe.d/, e.g. /etc/modprobe.d/50-hdmi.conf, containing the line options snd-hda-intel patch="ibx-hdmi" Up until recently (3.2.32), my system accepted the early patching and advertised only one (and the correct one) HDMI pin as follows: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Sadly after a recent upgrade, this functionality seems broken. The kernel log below shows the patch is accepted, but immediately after, it seems to be ignored and all HDMI pins are shown.. While this is not a big issue, it's annoying and can put off new users who don't know which HDMI pin to choose from. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=be3ae895-1fd2-4375-901e-83ee4ecae1f0 ro quiet ** Not tainted ** Kernel log: [ 3.443127] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 3.504609] asus_wmi: Asus Management GUID not found [ 3.513004] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 3.513011] [drm] MTRR allocation failed. Graphics performance may suffer. [ 3.513723] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 3.513732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.513735] [drm] Driver supports precise vblank timestamp query. [ 3.513811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.522795] iwlwifi 0000:01:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory [ 3.522807] iwlwifi 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532 [ 3.523429] Registered led device: phy0-led [ 3.544846] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.551107] cfg80211: World regulatory domain updated: [ 3.551112] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.551119] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.551125] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.551130] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.551135] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.551140] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.764499] usb 2-1.5: New USB device found, idVendor=174f, idProduct=1420 [ 3.764510] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.764518] usb 2-1.5: Product: USB Camera Device [ 3.764525] usb 2-1.5: Manufacturer: Syntek [ 3.764530] usb 2-1.5: SerialNumber: STK00001 [ 3.908270] Linux media interface: v0.10 [ 3.914634] Linux video capture interface: v2.00 [ 3.917916] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1420) [ 4.009071] input: USB Camera Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5 [ 4.009349] usbcore: registered new interface driver uvcvideo [ 4.009358] USB Video Class driver (1.1.1) [ 4.194089] fbcon: inteldrmfb (fb0) is primary device [ 4.285271] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0 [ 4.330489] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6 [ 4.370203] Console: switching to colour frame buffer device 170x48 [ 4.380882] fb0: inteldrmfb frame buffer device [ 4.380888] drm: registered panic notifier [ 4.385587] acpi device:3e: registered as cooling_device4 [ 4.386638] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 4.386808] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.386909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.387009] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 4.387216] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.387311] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.432066] hda-intel: Applying patch firmware 'ibx-hdmi' [ 4.439976] snd_hda_intel 0000:00:1b.0: firmware: agent loaded ibx-hdmi into memory [ 4.448717] hda_codec: ALC269: SKU not ready 0x598301f0 [ 4.451911] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 5.466200] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0 [ 5.466509] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 5.466779] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 5.467176] input: HDA Intel HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.467488] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.467787] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.468898] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 7.232578] Adding 3856380k swap on /dev/sda3. Priority:-1 extents:1 across:3856380k SS [ 7.270206] EXT4-fs (sda2): re-mounted. Opts: (null) [ 7.370711] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 7.424207] loop: module loaded [ 8.367408] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 8.641526] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 9.038185] RPC: Registered named UNIX socket transport module. [ 9.038194] RPC: Registered udp transport module. [ 9.038199] RPC: Registered tcp transport module. [ 9.038204] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.050492] FS-Cache: Loaded [ 9.069819] FS-Cache: Netfs 'nfs' registered for caching [ 9.081676] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 10.063216] Bluetooth: RFCOMM TTY layer initialized [ 10.063227] Bluetooth: RFCOMM socket layer initialized [ 10.063231] Bluetooth: RFCOMM ver 1.11 [ 10.068735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.068741] Bluetooth: BNEP filters: protocol multicast [ 10.148446] lp: driver loaded but no devices found [ 10.153486] ppdev: user-space parallel port driver [ 10.224705] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 10.231498] iwlwifi 0000:01:00.0: Radio type=0x1-0x3-0x1 [ 10.467071] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S [ 10.473860] iwlwifi 0000:01:00.0: Radio type=0x1-0x3-0x1 [ 10.589818] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.607983] r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory [ 10.739159] r8169 0000:02:00.0: eth0: link down [ 10.740337] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.833919] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 17.268850] wlan0: authenticate with 00:7f:28:2b:87:16 (try 1) [ 17.270760] wlan0: authenticated [ 17.328545] wlan0: associate with 00:7f:28:2b:87:16 (try 1) [ 17.332043] wlan0: RX AssocResp from 00:7f:28:2b:87:16 (capab=0x431 status=0 aid=4) [ 17.332058] wlan0: associated [ 17.341579] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.341767] cfg80211: Calling CRDA for country: US [ 17.352009] cfg80211: Regulatory domain changed to country: US [ 17.352017] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.352028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 17.352037] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 17.352045] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.352054] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.352062] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.352070] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 17.391849] wlan0: Wrong control channel in association response: configured center-freq: 2437 hti-cfreq: 2417 hti->control_chan: 2 band: 0. Disabling HT. [ 27.932919] wlan0: no IPv6 routers present ** Model information sys_vendor: To be filled by O.E.M. product_name: To be filled by O.E.M. product_version: AC5G3N-S8_F6 chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: Spring Peak board_vendor: To be filled by O.E.M. board_name: To be filled by O.E.M. board_version: To be filled by O.E.M. ** Loaded modules: cryptd aes_x86_64 aes_generic parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc nls_utf8 nls_cp437 vfat fat loop snd_hda_codec_hdmi snd_hda_codec_realtek joydev uvcvideo videodev v4l2_compat_ioctl32 media arc4 sparse_keymap snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer i915 snd iwlwifi coretemp drm_kms_helper pcspkr drm crc32c_intel mac80211 btusb psmouse iTCO_wdt classmate_laptop i2c_algo_bit evdev serio_raw bluetooth intel_ips i2c_i801 cfg80211 iTCO_vendor_support soundcore i2c_core wmi acpi_cpufreq rfkill battery mperf video ac button processor power_supply thermal_sys ext4 crc16 jbd2 mbcache microcode sg sd_mod crc_t10dif ahci libahci r8169 mii ehci_hcd libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 18) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 18) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f080 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Giga-byte Technology Device [1458:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe509000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe508000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Giga-byte Technology Device [1458:a950] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe507000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f020 [size=32] Region 5: Memory at fe506000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe505000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f000 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Giga-byte Technology Device [1458:0000] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe504000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:422c] (rev 3e) Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1301] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at e000 [size=256] Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 002 Device 003: ID 174f:1420 Syntek -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (900, 'testing'), (200, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: ii firmware-atheros 0.36+wheezy.1 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36+wheezy.1 pn firmware-libertas <none> ii firmware-linux 0.36+wheezy.1 ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130131052603.3758.93925.reportbug@lc2131
