Package: src:linux Version: 3.2.35-2 Severity: normal Dear Maintainer,
* What led up to the situation? Either: a) request Suspend at the XFCE desktop b) set Power Manager to suspend after a period of inactivty Then: resume from suspend by touchpad or keyboard activity * What exactly did you do (or not do) that was effective ? I did (or did not) as I always did (or did not) when running Debian Squeeze: the Wheezy behaviour is regressive. * What was the outcome of this action? No wireless network connection after resumse (until the PCMCIA network card is ejcted and reinserted). * What outcome did you expect instead? Wireless connection to be restablished automatically by the desktop network manager (wicd in this instance). -- Notes dmesg below shows the end of failure to resume and then the success after ejecting and reinserting the card. The firmware image is 2.13.1.0.arm (md5sum 8ff41cff31c9323330d6170b54735477) taken from http://daemonizer.de/prism54/prism54-fw/. This is not the most recent image but it is the most recent that the network card will boot. Repeat, resume from suspend to RAM worked perfectly well under Debian Squeeze with this firmware image. The machine also fails to recover the wireless network connnection after hibernation. -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=1d6f9e11-20cb-4aa9-945b-ca7961131bea ro quiet ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 2667.981805] [<c11f3b4a>] ? __driver_attach+0x5b/0x5b [ 2667.981816] [<c11f33b9>] ? bus_probe_device+0x1f/0x74 [ 2667.981847] [<c11f1f0d>] ? device_add+0x388/0x4e7 [ 2667.981864] [<c1171418>] ? pci_bus_read_config_byte+0x51/0x5a [ 2667.981878] [<c1171d22>] ? pci_bus_add_device+0xc/0x2c [ 2667.981888] [<c1171e2e>] ? pci_bus_add_devices+0x1d/0xaf [ 2667.981912] [<d81c0113>] ? cb_alloc+0x97/0xf84 [pcmcia_core] [ 2667.981929] [<d81bfa51>] ? socket_late_resume+0x78/0x93 [pcmcia_core] [ 2667.981945] [<d81bfa85>] ? pcmcia_socket_dev_resume+0x19/0x27 [pcmcia_core] [ 2667.981956] [<c11f77b1>] ? pm_op+0x84/0x108 [ 2667.981967] [<c11f7ab8>] ? device_resume+0x78/0xc1 [ 2667.981977] [<c11f813c>] ? dpm_resume+0xbe/0x151 [ 2667.981988] [<c11f82d9>] ? dpm_resume_end+0x8/0x10 [ 2667.982006] [<c1062d96>] ? suspend_devices_and_enter+0x1a3/0x1db [ 2667.982016] [<c1062edf>] ? enter_state+0x111/0x14d [ 2667.982027] [<c1062119>] ? state_store+0x93/0xcd [ 2667.982037] [<c1062086>] ? pm_async_store+0x2d/0x2d [ 2667.982060] [<c115de3b>] ? kobj_attr_store+0x18/0x1c [ 2667.982082] [<c1110065>] ? sysfs_write_file+0xb6/0xe3 [ 2667.982093] [<c110ffaf>] ? sysfs_poll+0x60/0x60 [ 2667.982123] [<c10cc83f>] ? vfs_write+0x83/0xd4 [ 2667.982134] [<c10cc9ff>] ? sys_write+0x3d/0x61 [ 2667.982150] [<c12c641f>] ? sysenter_do_call+0x12/0x28 [ 2667.982159] ---[ end trace d6af62e7099b8a09 ]--- [ 2667.982170] p54pci 0000:02:00.0: firmware: isl3886pci will not be loaded [ 2667.982181] ------------[ cut here ]------------ [ 2667.982193] WARNING: at /build/buildd-linux_3.2.35-2-i386-pOtnxQ/linux-3.2.35/drivers/base/firmware_class.c:547 _request_firmware+0xbe/0x334() [ 2667.982202] Hardware name: Versa Premium [ 2667.982206] Modules linked in: sis sisfb drm ppdev lp bnep rfcomm bluetooth autofs4 uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop arc4 p54pci p54common mac80211 cfg80211 joydev rfkill snd_trident snd_ac97_codec snd_util_mem snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_rawmidi pcmcia snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer psmouse snd yenta_socket shpchp serio_raw pcmcia_rsrc evdev pcmcia_core pcspkr soundcore ac97_bus gameport i2c_sis630 i2c_core button battery irda parport_pc parport crc_ccitt processor ac power_supply thermal_sys ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ehci_hcd usbcore ata_generic usb_common pata_sis libata floppy scsi_mod [last unloaded: scsi_wait_scan] [ 2667.982336] Pid: 4996, comm: pm-suspend Tainted: G W 3.2.0-4-686-pae #1 Debian 3.2.35-2 [ 2667.982343] Call Trace: [ 2667.982355] [<c10383ac>] ? warn_slowpath_common+0x68/0x79 [ 2667.982366] [<c11fad7c>] ? _request_firmware+0xbe/0x334 [ 2667.982378] [<c10383ca>] ? warn_slowpath_null+0xd/0x10 [ 2667.982389] [<c11fad7c>] ? _request_firmware+0xbe/0x334 [ 2667.982402] [<c11faffb>] ? request_firmware+0x9/0xc [ 2667.982416] [<d8293f0d>] ? p54p_probe+0x29a/0x32e [p54pci] [ 2667.982432] [<c100e0f3>] ? dma_set_mask+0x35/0x35 [ 2667.982444] [<c1176263>] ? pci_device_probe+0x53/0x9a [ 2667.982457] [<c11f3a6f>] ? driver_probe_device+0x8c/0x10c [ 2667.982467] [<c11f2a59>] ? bus_for_each_drv+0x37/0x60 [ 2667.982478] [<c11f39b2>] ? device_attach+0x58/0x74 [ 2667.982488] [<c11f3b4a>] ? __driver_attach+0x5b/0x5b [ 2667.982498] [<c11f33b9>] ? bus_probe_device+0x1f/0x74 [ 2667.982511] [<c11f1f0d>] ? device_add+0x388/0x4e7 [ 2667.982521] [<c1171418>] ? pci_bus_read_config_byte+0x51/0x5a [ 2667.982533] [<c1171d22>] ? pci_bus_add_device+0xc/0x2c [ 2667.982543] [<c1171e2e>] ? pci_bus_add_devices+0x1d/0xaf [ 2667.982564] [<d81c0113>] ? cb_alloc+0x97/0xf84 [pcmcia_core] [ 2667.982581] [<d81bfa51>] ? socket_late_resume+0x78/0x93 [pcmcia_core] [ 2667.982596] [<d81bfa85>] ? pcmcia_socket_dev_resume+0x19/0x27 [pcmcia_core] [ 2667.982607] [<c11f77b1>] ? pm_op+0x84/0x108 [ 2667.982617] [<c11f7ab8>] ? device_resume+0x78/0xc1 [ 2667.982628] [<c11f813c>] ? dpm_resume+0xbe/0x151 [ 2667.982638] [<c11f82d9>] ? dpm_resume_end+0x8/0x10 [ 2667.982649] [<c1062d96>] ? suspend_devices_and_enter+0x1a3/0x1db [ 2667.982660] [<c1062edf>] ? enter_state+0x111/0x14d [ 2667.982670] [<c1062119>] ? state_store+0x93/0xcd [ 2667.982679] [<c1062086>] ? pm_async_store+0x2d/0x2d [ 2667.982694] [<c115de3b>] ? kobj_attr_store+0x18/0x1c [ 2667.982710] [<c1110065>] ? sysfs_write_file+0xb6/0xe3 [ 2667.982721] [<c110ffaf>] ? sysfs_poll+0x60/0x60 [ 2667.982732] [<c10cc83f>] ? vfs_write+0x83/0xd4 [ 2667.982743] [<c10cc9ff>] ? sys_write+0x3d/0x61 [ 2667.982754] [<c12c641f>] ? sysenter_do_call+0x12/0x28 [ 2667.982761] ---[ end trace d6af62e7099b8a0a ]--- [ 2667.982769] p54pci 0000:02:00.0: firmware: isl3886 will not be loaded [ 2667.982859] p54pci: probe of 0000:02:00.0 failed with error -16 [ 2668.120289] PM: resume of devices complete after 3219.954 msecs [ 2668.120786] PM: Finishing wakeup. [ 2668.120796] Restarting tasks ... done. [ 2699.257111] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [ 2702.160098] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 2702.160161] pci 0000:02:00.0: [1260:3890] type 0 class 0x000280 [ 2702.160206] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00001fff] [ 2702.160346] pci 0000:02:00.0: supports D1 D2 [ 2702.160356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2702.160413] pci 0000:02:00.0: BAR 0: assigned [mem 0x28000000-0x28001fff] [ 2702.160881] p54pci 0000:02:00.0: enabling device (0000 -> 0002) [ 2702.160940] p54pci 0000:02:00.0: setting latency timer to 64 [ 2702.210914] p54pci 0000:02:00.0: firmware: agent loaded isl3886pci into memory [ 2702.220943] ieee80211 phy2: p54 detected a LM86 firmware [ 2702.220955] p54: rx_mtu reduced from 3240 to 2376 [ 2702.220964] ieee80211 phy2: FW rev 2.13.1.0 - Softmac protocol 5.5 [ 2702.220976] ieee80211 phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 2703.132554] ieee80211 phy2: hwaddr 00:09:5b:ee:e5:0e, MAC:isl3886 RF:Frisbee [ 2703.133156] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 2703.147909] Registered led device: p54-phy2::assoc [ 2703.148940] Registered led device: p54-phy2::tx [ 2703.149070] Registered led device: p54-phy2::rx [ 2703.149166] Registered led device: p54-phy2::radio [ 2703.149196] p54pci 0000:02:00.0: is registered as 'phy2' [ 2703.615634] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2704.669254] wlan0: authenticate with e0:46:9a:06:e6:7a (try 1) [ 2704.672770] wlan0: authenticated [ 2704.675802] wlan0: associate with e0:46:9a:06:e6:7a (try 1) [ 2704.680976] wlan0: RX AssocResp from e0:46:9a:06:e6:7a (capab=0x431 status=0 aid=2) [ 2704.681007] wlan0: associated [ 2704.682625] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2715.296065] wlan0: no IPv6 routers present ** Model information not available ** Loaded modules: sis sisfb drm ppdev lp bnep rfcomm bluetooth autofs4 uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop arc4 p54pci p54common mac80211 cfg80211 joydev rfkill snd_trident snd_ac97_codec snd_util_mem snd_mpu401_uart snd_seq_midi snd_seq_midi_event snd_rawmidi pcmcia snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer psmouse snd yenta_socket shpchp serio_raw pcmcia_rsrc evdev pcmcia_core pcspkr soundcore ac97_bus gameport i2c_sis630 i2c_core button battery irda parport_pc parport crc_ccitt processor ac power_supply thermal_sys ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ehci_hcd usbcore ata_generic usb_common pata_sis libata floppy scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary wired interface allow-hotplug eth0 iface eth0 inet dhcp # The primary wireless interface allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/network/custards.conf ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:09:5b:ee:e5:0e brd ff:ff:ff:ff:ff:ff inet 192.168.19.20/24 brd 192.168.19.255 scope global wlan0 inet6 fe80::209:5bff:feee:e50e/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 125672 431 0 0 0 0 0 0 125672 431 0 0 0 0 0 0 wlan0: 790284 1315 0 0 0 0 0 0 229775 1214 0 0 0 0 0 0 *** Protocol statistics: Ip: 6058 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 6009 incoming packets delivered 4453 requests sent out 5 dropped because of missing route Icmp: 8 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 6 echo replies: 2 2 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo request: 2 IcmpMsg: InType0: 2 InType3: 6 OutType8: 2 Tcp: 32 active connections openings 6 passive connection openings 0 failed connection attempts 0 connection resets received 5 connections established 5513 segments received 4401 segments send out 12 segments retransmited 0 bad segments received. 1 resets sent Udp: 1088 packets received 0 packets to unknown port received. 0 packet receive errors 456 packets sent UdpLite: TcpExt: 1 packets pruned from receive queue because of socket buffer overrun 18 TCP sockets finished time wait in fast timer 92 delayed acks sent 1 delayed acks further delayed because of locked socket 3 packets directly queued to recvmsg prequeue. 2 bytes directly received in process context from prequeue 3470 packet headers predicted 283 acknowledgments not containing data payload received 2604 predicted acknowledgments 12 retransmits in slow start 26 packets collapsed in receive queue due to low socket buffer IpExt: InMcastPkts: 61 OutMcastPkts: 64 InBcastPkts: 569 OutBcastPkts: 117 InOctets: 3072710 OutOctets: 686797 InMcastOctets: 8461 OutMcastOctets: 8513 InBcastOctets: 67824 OutBcastOctets: 13411 ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 630 Host [1039:0630] (rev 31) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-sis 00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513] (rev d0) (prog-if 80 [Master]) Subsystem: Packard Bell B.V. Device [1631:9001] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin A routed to IRQ 255 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 1400 [size=16] Kernel driver in use: pata_sis 00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0018] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: sis630_smbus 00:01.2 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10 [OHCI]) Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:01.4 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator [1039:7018] (rev 02) Subsystem: Packard Bell B.V. Device [1631:2005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 6000ns max) Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at ec001000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: snd_trident 00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0001] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: ec100000-ec1fffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:08.0 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01) Subsystem: Packard Bell B.V. Device [1631:8000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at 18000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 2c000000-2fffffff (prefetchable) Memory window 1: 28000000-2bffffff I/O window 0: 00002400-000024ff I/O window 1: 00002000-000020ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 00:08.1 CardBus bridge [0607]: Texas Instruments PCI1225 [104c:ac1c] (rev 01) Subsystem: Packard Bell B.V. Device [1631:8000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at 1c000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 24000000-27ffffff (prefetchable) Memory window 1: 20000000-23ffffff I/O window 0: 00001c00-00001cff I/O window 1: 00001800-000018ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter [1039:6300] (rev 31) (prog-if 00 [VGA controller]) Subsystem: Packard Bell B.V. Device [1631:1002] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- BIST result: 00 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: sisfb 02:00.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01) Subsystem: Netgear WG511 v2/v3 54 Mbps Wireless PC Card [1385:4800] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64 (2500ns min, 7000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at 28000000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: p54pci ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-686-pae recommends: pn firmware-linux-free <none> ii libc6-i686 2.13-37 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-26 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130124152348.5898.27644.reportbug@larch
