Package: src:linux
Version: 3.2.35-2
Severity: normal
Tags: upstream
Attempting to suspend with the xhci_hcd module loaded breaks suspend and causes
the computer to resume immediately. This is an intermittent problem - it does
not always occur, but once it does it will continue to occur everytime a
suspend is attempted until the module is reloaded.
Below is an excerpt from syslog:
625 Jan 12 01:31:03 phenom kernel: [25747.293900] PM: Syncing filesystems
.... done.
626 Jan 12 01:31:03 phenom kernel: [25747.300376] PM: Preparing system for
mem sleep
627 Jan 12 01:31:05 phenom kernel: [25747.543832] Freezing user space
processes ... (elapsed 0.01 seconds) done.
628 Jan 12 01:31:05 phenom kernel: [25747.560076] Freezing remaining
freezable tasks ... (elapsed 0.01 seconds) done.
629 Jan 12 01:31:05 phenom kernel: [25747.576079] PM: Entering mem sleep
630 Jan 12 01:31:05 phenom kernel: [25747.576092] Suspending console(s)
(use no_console_suspend to debug)
631 Jan 12 01:31:05 phenom kernel: [25747.576457] sd 5:0:0:0: [sdb]
Synchronizing SCSI cache
632 Jan 12 01:31:05 phenom kernel: [25747.576492] sd 4:0:0:0: [sda]
Synchronizing SCSI cache
633 Jan 12 01:31:05 phenom kernel: [25747.576554] sd 5:0:0:0: [sdb]
Stopping disk
634 Jan 12 01:31:05 phenom kernel: [25747.576699] parport_pc 00:09:
disabled
635 Jan 12 01:31:05 phenom kernel: [25747.576741] serial 00:08: disabled
636 Jan 12 01:31:05 phenom kernel: [25747.577265] ACPI handle has no
context!
637 Jan 12 01:31:05 phenom kernel: [25747.577298] xhci_hcd 0000:03:00.0:
WARN: xHC CMD_RUN timeout
638 Jan 12 01:31:05 phenom kernel: [25747.577313] suspend_common():
xhci_pci_suspend+0x0/0x2b [xhci_hcd] returns -110
639 Jan 12 01:31:05 phenom kernel: [25747.577320] pci_pm_suspend():
hcd_pci_suspend+0x0/0x22 [usbcore] returns -110
640 Jan 12 01:31:05 phenom kernel: [25747.577324] pm_op():
pci_pm_suspend+0x0/0xf5 returns -110
641 Jan 12 01:31:05 phenom kernel: [25747.577326] PM: Device 0000:03:00.0
failed to suspend async: error -110
642 Jan 12 01:31:05 phenom kernel: [25747.609679] sd 4:0:0:0: [sda]
Stopping disk
643 Jan 12 01:31:05 phenom kernel: [25748.177392] PM: Some devices failed
to suspend
644 Jan 12 01:31:05 phenom kernel: [25748.178065] sd 4:0:0:0: [sda]
Starting disk
645 Jan 12 01:31:05 phenom kernel: [25748.178067] serial 00:08: activated
646 Jan 12 01:31:05 phenom kernel: [25748.178119] sd 5:0:0:0: [sdb]
Starting disk
647 Jan 12 01:31:05 phenom kernel: [25748.178305] parport_pc 00:09:
activated
648 Jan 12 01:31:05 phenom kernel: [25748.192325] ahci 0000:05:00.0:
setting latency timer to 64
649 Jan 12 01:31:05 phenom kernel: [25748.192381] pata_jmicron
0000:07:00.1: setting latency timer to 64
650 Jan 12 01:31:05 phenom kernel: [25748.192401] pata_jmicron
0000:05:00.1: setting latency timer to 64
651 Jan 12 01:31:05 phenom kernel: [25748.192448] ahci 0000:07:00.0:
setting latency timer to 64
652 Jan 12 01:31:05 phenom kernel: [25748.248148] firewire_core: skipped
bus generations, destroying all nodes
653 Jan 12 01:31:05 phenom kernel: [25748.512092] ata12: SATA link down
(SStatus 0 SControl 300)
654 Jan 12 01:31:05 phenom kernel: [25748.512109] ata14: SATA link down
(SStatus 0 SControl 300)
655 Jan 12 01:31:05 phenom kernel: [25748.512137] ata11: SATA link down
(SStatus 0 SControl 300)
656 Jan 12 01:31:05 phenom kernel: [25748.512157] ata13: SATA link down
(SStatus 0 SControl 300)
657 Jan 12 01:31:05 phenom kernel: [25748.748065] firewire_core:
rediscovered device fw0
658 Jan 12 01:31:05 phenom kernel: [25750.086549] PM: resume of devices
complete after 1909.153 msecs
659 Jan 12 01:31:05 phenom kernel: [25750.086643] PM: Finishing wakeup.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=d427f7a8-9f6d-419c-bd84-2e9703afab42 ro quiet
** Not tainted
** Kernel log:
[ 102.867471] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 102.867475] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 102.867478] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 102.867482] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 102.867486] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
[ 102.867663] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
[ 102.867667] xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X
[ 102.867670] xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X
[ 102.867674] xhci_hcd 0000:03:00.0: irq 56 for MSI/MSI-X
[ 102.867677] xhci_hcd 0000:03:00.0: irq 57 for MSI/MSI-X
[ 102.867680] xhci_hcd 0000:03:00.0: irq 58 for MSI/MSI-X
[ 102.867684] xhci_hcd 0000:03:00.0: irq 59 for MSI/MSI-X
[ 102.868177] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 102.868262] usb usb7: root hub lost power or was reset
[ 102.868263] usb usb8: root hub lost power or was reset
[ 102.868274] ahci 0000:05:00.0: setting latency timer to 64
[ 102.868438] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 102.868503] ahci 0000:07:00.0: setting latency timer to 64
[ 102.868525] pata_jmicron 0000:07:00.1: setting latency timer to 64
[ 102.869186] xhci_hcd 0000:04:00.0: irq 60 for MSI/MSI-X
[ 102.869190] xhci_hcd 0000:04:00.0: irq 61 for MSI/MSI-X
[ 102.869193] xhci_hcd 0000:04:00.0: irq 62 for MSI/MSI-X
[ 102.869197] xhci_hcd 0000:04:00.0: irq 63 for MSI/MSI-X
[ 102.869201] xhci_hcd 0000:04:00.0: irq 64 for MSI/MSI-X
[ 102.869205] xhci_hcd 0000:04:00.0: irq 65 for MSI/MSI-X
[ 102.869208] xhci_hcd 0000:04:00.0: irq 66 for MSI/MSI-X
[ 102.869914] pcieport 0000:00:15.1: wake-up capability disabled by ACPI
[ 102.870777] serial 00:08: activated
[ 102.871046] parport_pc 00:09: activated
[ 102.871507] sd 4:0:0:0: [sda] Starting disk
[ 102.871545] sd 5:0:0:0: [sdb] Starting disk
[ 102.924161] firewire_core: skipped bus generations, destroying all nodes
[ 102.944262] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xB7E6
[ 102.958321] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xC9AB
[ 102.958353] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xCA61
[ 102.959452] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xCC18
[ 102.959453] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xCC7D
[ 102.979303] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 103.038254] r8169 0000:08:00.0: eth0: link down
[ 103.038689] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 103.039389] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 103.180100] ata9: SATA link down (SStatus 0 SControl 300)
[ 103.180129] ata7: SATA link down (SStatus 0 SControl 300)
[ 103.180157] ata10: SATA link down (SStatus 0 SControl 300)
[ 103.188106] ata14: SATA link down (SStatus 0 SControl 300)
[ 103.188124] ata12: SATA link down (SStatus 0 SControl 300)
[ 103.188151] ata13: SATA link down (SStatus 0 SControl 300)
[ 103.188167] ata11: SATA link down (SStatus 0 SControl 300)
[ 103.352087] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 103.353088] ata8.00: configured for UDMA/100
[ 103.424088] firewire_core: rediscovered device fw0
[ 104.980087] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 104.980628] ata5.00: configured for UDMA/100
[ 105.345250] r8169 0000:08:00.0: eth0: link up
[ 109.180086] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 109.182643] ata6.00: configured for UDMA/133
[ 109.221021] PM: resume of devices complete after 6359.907 msecs
[ 109.221208] PM: Finishing wakeup.
[ 109.221209] Restarting tasks ...
[ 109.221291] usb 7-1: USB disconnect, device number 2
[ 109.224428] done.
[ 109.226834] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226836] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226838] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226839] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226840] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226842] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226843] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226844] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226845] xHCI xhci_drop_endpoint called with unaddressed device
[ 109.226847] xHCI xhci_check_bandwidth called with unaddressed device
[ 109.226914] xHCI xhci_free_dev called with unaddressed device
[ 109.226930] usb 13-2: USB disconnect, device number 3
[ 109.227143] usblp0: removed
[ 110.948109] usb 13-2: new full-speed USB device number 4 using ohci_hcd
[ 111.123008] usb 13-2: New USB device found, idVendor=043d, idProduct=00cc
[ 111.123020] usb 13-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 111.123028] usb 13-2: Product: Lexmark E120n
[ 111.123033] usb 13-2: Manufacturer: Lexmark International
[ 111.123038] usb 13-2: SerialNumber: 99479CV
[ 111.129279] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid
0x043D pid 0x00CC
[ 111.740144] usb 7-1: new full-speed USB device number 3 using xhci_hcd
[ 111.793089] usb 7-1: New USB device found, idVendor=04f9, idProduct=01b8
[ 111.793100] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 111.793108] usb 7-1: SerialNumber: BROM7F513989
[ 111.793401] usb 7-1: ep 0x85 - rounding interval to 512 microframes, ep desc
says 800 microframes
[ 111.809247] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid
0x04F9 pid 0x01B8
[ 111.809850] scsi15 : usb-storage 7-1:1.3
[ 112.206452] usblp0: removed
[ 112.217125] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid
0x043D pid 0x00CC
[ 112.217476] usblp1: removed
[ 112.858010] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid
0x04F9 pid 0x01B8
[ 112.867624] scsi 15:0:0:0: Direct-Access Brother MFC-5860CN 1.00
PQ: 0 ANSI: 2
[ 112.869471] sd 15:0:0:0: Attached scsi generic sg3 type 0
[ 112.947955] sd 15:0:0:0: [sdc] Attached SCSI removable disk
[ 113.881467] usblp0: removed
[ 113.891974] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid
0x043D pid 0x00CC
[ 113.892130] usblp1: removed
[ 113.926790] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid
0x04F9 pid 0x01B8
[ 121.331130] A---------------------------------------------
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-870A-UD3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F5
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-870A-UD3
board_version: x.x
** Loaded modules:
ppdev
lp
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
firewire_sbp2
snd_hda_codec_realtek
adt7475
hwmon_vid
usblp
joydev
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
nouveau
snd_timer
mxm_wmi
video
ttm
drm_kms_helper
snd
drm
i2c_algo_bit
sp5100_tco
soundcore
k10temp
i2c_piix4
evdev
serio_raw
edac_mce_amd
powernow_k8
pcspkr
i2c_core
mperf
edac_core
parport_pc
parport
wmi
processor
thermal_sys
button
ext4
crc16
jbd2
mbcache
btrfs
crc32c
libcrc32c
zlib_deflate
usbhid
hid
sg
sr_mod
sd_mod
cdrom
crc_t10dif
usb_storage
ata_generic
ahci
libahci
ohci_hcd
firewire_ohci
firewire_core
crc_itu_t
pata_jmicron
r8169
mii
libata
scsi_mod
ehci_hcd
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RX780/RX790
Chipset Host Bridge [1002:5957]
Subsystem: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset
Host Bridge [1002:5957]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (PCI express gpp port A) [1002:597a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd200000-fd2fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01
[AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383] (rev 40)
Subsystem: Giga-byte Technology Device [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC
host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: fd900000-fd9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fd700000-fd7fffff
Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fd500000-fd5fffff
Prefetchable memory behind bridge: 00000000fd400000-00000000fd4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G80 [GeForce 8800
GTS] [10de:0193] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:343a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host
Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd2fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host
Controller [1912:0014] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fdefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 5: Memory at fd8fe000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at fd300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at af00 [size=8]
Region 1: I/O ports at ae00 [size=4]
Region 2: I/O ports at ad00 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at ab00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
[1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdaff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdaf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
07:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fd7fe000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at fd600000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
07:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 8f00 [size=8]
Region 1: I/O ports at 8e00 [size=4]
Region 2: I/O ports at 8d00 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 8b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
[1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: I/O ports at 7e00 [size=256]
Region 2: Memory at fd4ff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fd4f8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 013 Device 004: ID 043d:00cc Lexmark International, Inc. E120(n)
Bus 007 Device 003: ID 04f9:01b8 Brother Industries, Ltd MFC-5860CN
Bus 011 Device 002: ID 24f0:0137
Bus 013 Device 002: ID 045e:077d Microsoft Corp.
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (700, 'testing'), (500, 'testing-updates'), (500,
'stable-updates'), (400, 'stable'), (50, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130112033231.5714.37059.report...@phenom.tpgi.com.au
