Package: src:linux
Version: 3.2.32-1
Severity: normal
Dear Maintainer,
Like many others, I'm having trouble with USB 3.0. Since the problems render
the keyboards completely
inoperative all the time, this is potentially quite serious. Fortunately I
have USB 2.0 ports and SSH, and
so am able to get work done.
Many of the USB 3.0 reports on Debian and the net are of intermittent problems
with, e.g., mass storage devices.
In contrast I always experience this problem.
This is a new, Ivy bridge system with an Intel DH77DF motherboard and i3-2225
CPU, running diskless. Other connections are HDMI
and wired LAN. Installed a minimal squeeze system and then upgraded to testing.
There are other oddities, such as no login prompts, or anything else,
displaying on the virtual screens, and no access to
sound.
* What led up to the situation? Attempt to use a keyboard, either MS
Keyboard with USB cable or
logitech wireless (k400, includes touchpad).
* What exactly did you do (or not do) that was effective (or
ineffective)? Tried booting the older, 2.6.32-5, kernel. No help. Tried
using wireless keyboard
on Windows laptop to verify the batteries worked (and also in case it
needed to do some pairing). Worked fine.
Tried reinserting USB connector when system was up. No help.
Plugged USB cable into USB 2.0 port on this machine with this kernel;
worked fine. Haven't tried
the wireless keyboard and USB 2.0.
* What was the outcome of this action? Works with USB 2.0 ports, not with
3.0.
* What outcome did you expect instead? Just works.
Here are some logs from earlier attempts with the keyboards plugged into the
USB 3.0 ports; I think the relevant
stuff is at the end, but included more in case it's relevant.
Nov 18 14:50:57 htpc kernel: [ 1.265125] hub 1-0:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.265186] hub 1-0:1.0: 2 ports detected
Nov 18 14:50:57 htpc kernel: [ 1.265292] ehci_hcd 0000:00:1d.0: setting
latency timer to 64
Nov 18 14:50:57 htpc kernel: [ 1.265295] ehci_hcd 0000:00:1d.0: EHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.265358] ehci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 2
Nov 18 14:50:57 htpc kernel: [ 1.265449] ehci_hcd 0000:00:1d.0: debug port 2
Nov 18 14:50:57 htpc kernel: [ 1.269392] ehci_hcd 0000:00:1d.0: cache line
size of 64 is not supported
Nov 18 14:50:57 htpc kernel: [ 1.269404] ehci_hcd 0000:00:1d.0: irq 23, io
mem 0xf7d37000
Nov 18 14:50:57 htpc kernel: [ 1.284652] ehci_hcd 0000:00:1d.0: USB 2.0
started, EHCI 1.00
Nov 18 14:50:57 htpc kernel: [ 1.284744] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0002
Nov 18 14:50:57 htpc kernel: [ 1.284804] usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 18 14:50:57 htpc kernel: [ 1.284872] usb usb2: Product: EHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.284929] usb usb2: Manufacturer: Linux
3.2.0-4-amd64 ehci_hcd
Nov 18 14:50:57 htpc kernel: [ 1.284987] usb usb2: SerialNumber: 0000:00:1d.0
Nov 18 14:50:57 htpc kernel: [ 1.285118] hub 2-0:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.285178] hub 2-0:1.0: 2 ports detected
Nov 18 14:50:57 htpc kernel: [ 1.285299] xhci_hcd 0000:00:14.0: setting
latency timer to 64
Nov 18 14:50:57 htpc kernel: [ 1.285302] xhci_hcd 0000:00:14.0: xHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.285370] xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 3
Nov 18 14:50:57 htpc kernel: [ 1.285875] xhci_hcd 0000:00:14.0: cache line
size of 64 is not supported
Nov 18 14:50:57 htpc kernel: [ 1.285880] xhci_hcd 0000:00:14.0: irq 16, io
mem 0xf7d20000
Nov 18 14:50:57 htpc kernel: [ 1.285946] xhci_hcd 0000:00:14.0: Failed to
enable MSI-X
Nov 18 14:50:57 htpc kernel: [ 1.286033] xhci_hcd 0000:00:14.0: irq 41 for
MSI/MSI-X
Nov 18 14:50:57 htpc kernel: [ 1.286071] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0002
Nov 18 14:50:57 htpc kernel: [ 1.286130] usb usb3: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 18 14:50:57 htpc kernel: [ 1.286199] usb usb3: Product: xHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.286256] usb usb3: Manufacturer: Linux
3.2.0-4-amd64 xhci_hcd
Nov 18 14:50:57 htpc kernel: [ 1.286317] usb usb3: SerialNumber: 0000:00:14.0
Nov 18 14:50:57 htpc kernel: [ 1.286424] xHCI xhci_add_endpoint called for
root hub
Nov 18 14:50:57 htpc kernel: [ 1.286425] xHCI xhci_check_bandwidth called
for root hub
Nov 18 14:50:57 htpc kernel: [ 1.286443] hub 3-0:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.286443] hub 3-0:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.286506] hub 3-0:1.0: 4 ports detected
Nov 18 14:50:57 htpc kernel: [ 1.286601] xhci_hcd 0000:00:14.0: xHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.286661] xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 4
Nov 18 14:50:57 htpc kernel: [ 1.286741] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0003
Nov 18 14:50:57 htpc kernel: [ 1.286801] usb usb4: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 18 14:50:57 htpc kernel: [ 1.286870] usb usb4: Product: xHCI Host
Controller
Nov 18 14:50:57 htpc kernel: [ 1.286927] usb usb4: Manufacturer: Linux
3.2.0-4-amd64 xhci_hcd
Nov 18 14:50:57 htpc kernel: [ 1.286985] usb usb4: SerialNumber: 0000:00:14.0
Nov 18 14:50:57 htpc kernel: [ 1.287083] xHCI xhci_add_endpoint called for
root hub
Nov 18 14:50:57 htpc kernel: [ 1.287084] xHCI xhci_check_bandwidth called
for root hub
Nov 18 14:50:57 htpc kernel: [ 1.287100] hub 4-0:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.287162] hub 4-0:1.0: 4 ports detected
Nov 18 14:50:57 htpc kernel: [ 1.419455] RPC: Registered named UNIX socket
transport module.
Nov 18 14:50:57 htpc kernel: [ 1.419520] RPC: Registered udp transport
module.
Nov 18 14:50:57 htpc kernel: [ 1.419577] RPC: Registered tcp transport
module.
Nov 18 14:50:57 htpc kernel: [ 1.419634] RPC: Registered tcp NFSv4.1
backchannel transport module.
Nov 18 14:50:57 htpc kernel: [ 1.420407] FS-Cache: Loaded
Nov 18 14:50:57 htpc kernel: [ 1.422914] FS-Cache: Netfs 'nfs' registered
for caching
Nov 18 14:50:57 htpc kernel: [ 1.576645] usb 1-1: new high-speed USB device
number 2 using ehci_hcd
Nov 18 14:50:57 htpc kernel: [ 1.708647] Refined TSC clocksource
calibration: 3292.521 MHz.
Nov 18 14:50:57 htpc kernel: [ 1.708714] Switching to clocksource tsc
Nov 18 14:50:57 htpc kernel: [ 1.718732] usb 1-1: New USB device found,
idVendor=8087, idProduct=0024
Nov 18 14:50:57 htpc kernel: [ 1.718812] usb 1-1: New USB device strings:
Mfr=0, Product=0, SerialNumber=0
Nov 18 14:50:57 htpc kernel: [ 1.719008] hub 1-1:1.0: USB hub found
Nov 18 14:50:57 htpc kernel: [ 1.719100] hub 1-1:1.0: 6 ports detected
Nov 18 14:50:57 htpc kernel: [ 1.814136] e1000e 0000:00:19.0: irq 40 for
MSI/MSI-X
Nov 18 14:50:57 htpc kernel: [ 1.868667] e1000e 0000:00:19.0: irq 40 for
MSI/MSI-X
Nov 18 14:50:57 htpc kernel: [ 1.869121] ADDRCONF(NETDEV_UP): eth0: link is
not ready
Nov 18 14:50:57 htpc kernel: [ 1.884630] usb 3-1: new low-speed USB device
number 2 using xhci_hcd
Nov 18 14:50:57 htpc kernel: [ 1.912291] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 1.920151] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 1.922570] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 1.922656] usb 3-1: New USB device found,
idVendor=045e, idProduct=00b0
Nov 18 14:50:57 htpc kernel: [ 1.922729] usb 3-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Nov 18 14:50:57 htpc kernel: [ 1.922788] usb 3-1: Product: Microsoft®
Digital Media Pro Keyboard
Nov 18 14:50:57 htpc kernel: [ 1.922847] usb 3-1: Manufacturer: Microsoft
Nov 18 14:50:57 htpc kernel: [ 1.922958] usb 3-1: ep 0x81 - rounding
interval to 64 microframes, ep desc says 80 microframes
Nov 18 14:50:57 htpc kernel: [ 1.923031] usb 3-1: ep 0x82 - rounding
interval to 64 microframes, ep desc says 80 microframes
Nov 18 14:50:57 htpc kernel: [ 1.932291] input: Microsoft Microsoft® Digital
Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0\
/usb3/3-1/3-1:1.0/input/input0
Nov 18 14:50:57 htpc kernel: [ 1.932394] generic-usb 0003:045E:00B0.0001:
input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsof\
t® Digital Media Pro Keyboard] on usb-0000:00:14.0-1/input0
Nov 18 14:50:57 htpc kernel: [ 1.933219] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 1.946142] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 1.946332] input: Microsoft Microsoft® Digital
Media Pro Keyboard as /devices/pci0000:00/0000:00:14.0\
/usb3/3-1/3-1:1.1/input/input1
Nov 18 14:50:57 htpc kernel: [ 1.946436] generic-usb 0003:045E:00B0.0002:
input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft®\
Digital Media Pro Keyboard] on usb-0000:00:14.0-1/input1
Nov 18 14:50:57 htpc kernel: [ 1.946534] usbcore: registered new interface
driver usbhid
Nov 18 14:50:57 htpc kernel: [ 1.946590] usbhid: USB HID core driver
Nov 18 14:50:57 htpc kernel: [ 2.088623] usb 3-2: new full-speed USB device
number 3 using xhci_hcd
Nov 18 14:50:57 htpc kernel: [ 2.105081] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.105222] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.105359] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.106441] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 2.106770] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 2.107080] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
ov 18 14:50:57 htpc kernel: [ 2.107155] usb 3-2: New USB device found,
idVendor=046d, idProduct=c52b
Nov 18 14:50:57 htpc kernel: [ 2.107228] usb 3-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Nov 18 14:50:57 htpc kernel: [ 2.107288] usb 3-2: Product: USB Receiver
Nov 18 14:50:57 htpc kernel: [ 2.107344] usb 3-2: Manufacturer: Logitech
Nov 18 14:50:57 htpc kernel: [ 2.107974] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 2.110048] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.111212] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 2.111527] xhci_hcd 0000:00:14.0: WARN: short
transfer on control ep
Nov 18 14:50:57 htpc kernel: [ 2.111678] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.111836] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.112027] logitech-djreceiver
0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech U\
SB Receiver] on usb-0000:00:14.0-2/input2
Nov 18 14:50:57 htpc kernel: [ 2.112367] xhci_hcd 0000:00:14.0: WARN:
Stalled endpoint
Nov 18 14:50:57 htpc kernel: [ 2.112442] logitech-djreceiver
0003:046D:C52B.0005: logi_dj_probe:logi_dj_recv_query_paired_devices e\
rror:-32
Nov 18 14:50:57 htpc kernel: [ 2.112667] logitech-djreceiver: probe of
0003:046D:C52B.0005 failed with error -32
No
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
** Command line:
root=/dev/nfs netboot=nfs nfsroot=192.168.40.2:/mnt/htpc
initrd=initrd.img-3.2.0-4-amd64 -- BOOT_IMAGE=vmlinuz-3.2.0-4-amd64
** Not tainted
** Kernel log:
[ 2.020979] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.021181] hub 4-1:1.0: USB hub found
[ 2.021281] hub 4-1:1.0: 8 ports detected
[ 2.092659] usb 3-1.5: new low-speed USB device number 3 using ehci_hcd
[ 2.206655] usb 3-1.5: New USB device found, idVendor=045e, idProduct=00b0
[ 2.206722] usb 3-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.206805] usb 3-1.5: Product: Microsoft\xffffffc2\xffffffae Digital Media
Pro Keyboard
[ 2.206861] usb 3-1.5: Manufacturer: Microsoft
[ 2.216427] input: Microsoft Microsoft\xffffffc2\xffffffae Digital Media Pro
Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input0
[ 2.216535] generic-usb 0003:045E:00B0.0001: input,hidraw0: USB HID v1.11
Keyboard [Microsoft Microsoft\xffffffc2\xffffffae Digital Media Pro Keyboard]
on usb-0000:00:1a.0-1.5/input0
[ 2.230794] input: Microsoft Microsoft\xffffffc2\xffffffae Digital Media Pro
Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.1/input/input1
[ 2.230906] generic-usb 0003:045E:00B0.0002: input,hidraw1: USB HID v1.11
Device [Microsoft Microsoft\xffffffc2\xffffffae Digital Media Pro Keyboard] on
usb-0000:00:1a.0-1.5/input1
[ 2.231001] usbcore: registered new interface driver usbhid
[ 2.231057] usbhid: USB HID core driver
[ 4.994248] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 4.994713] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.452456] udevd[328]: starting version 175
[ 6.724187] iTCO_vendor_support: vendor-support=0
[ 6.757936] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.758067] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 6.758199] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.813847] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.825041] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.825077] ACPI: Power Button [PWRB]
[ 6.825139] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.825173] ACPI: Power Button [PWRF]
[ 6.840929] ACPI: Requesting acpi_cpufreq
[ 6.851798] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with
ACPI region SMBI [io 0xf040-0xf04f]
[ 6.851831] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.879399] Monitor-Mwait will be used to enter C-1 state
[ 6.879407] Monitor-Mwait will be used to enter C-2 state
[ 6.879415] ACPI: acpi_idle registered with cpuidle
[ 6.934475] [drm] Initialized drm 1.1.0 20060810
[ 7.012080] SCSI subsystem initialized
[ 7.015404] firewire_ohci 0000:02:00.0: setting latency timer to 64
[ 7.062269] libata version 3.00 loaded.
[ 7.076547] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4
IR + 8 IT contexts, quirks 0x11
[ 7.118465] i915 0000:00:02.0: setting latency timer to 64
[ 7.148019] mtrr: type mismatch for e0000000,10000000 old: write-back new:
write-combining
[ 7.148052] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 7.148356] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 7.148361] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.148381] [drm] Driver supports precise vblank timestamp query.
[ 7.148490] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 7.150214] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.609392] firewire_core: created device fw0: GUID e0cb4e000014acc6, S400
[ 7.720509] fbcon: inteldrmfb (fb0) is primary device
[ 8.007441] Console: switching to colour frame buffer device 128x48
[ 8.011128] fb0: inteldrmfb frame buffer device
[ 8.011163] drm: registered panic notifier
[ 8.013029] acpi device:4b: registered as cooling_device9
[ 8.013417] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 8.013540] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.013689] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.013800] ahci 0000:00:1f.2: version 3.0
[ 8.013898] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 8.013943] ahci: SSS flag set, parallel bus scan disabled
[ 8.028493] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x28
impl SATA mode
[ 8.028562] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum
part ems sxs apst
[ 8.028630] ahci 0000:00:1f.2: setting latency timer to 64
[ 8.037068] scsi0 : ahci
[ 8.037234] scsi1 : ahci
[ 8.037364] scsi2 : ahci
[ 8.037489] scsi3 : ahci
[ 8.037615] scsi4 : ahci
[ 8.037740] scsi5 : ahci
[ 8.038133] ata1: DUMMY
[ 8.038155] ata2: DUMMY
[ 8.038176] ata3: DUMMY
[ 8.038200] ata4: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36280
irq 43
[ 8.038256] ata5: DUMMY
[ 8.038278] ata6: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36380
irq 43
[ 8.038492] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.038524] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.356460] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.676454] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.678540] hda_codec: ALC898: BIOS auto-probing.
[ 8.698771] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 8.698789] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 8.698982] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 8.702504] HDMI: detected monitor SAMSUNG at connection type HDMI
[ 8.702506] HDMI: available speakers: FL/FR
[ 8.702510] HDMI: supports coding type LPCM: channels = 2, rates = 32000
44100 48000, bits = 16 20 24
[ 8.702726] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.702844] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.703222] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.713669] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 8.719894] HDMI: detected monitor SAMSUNG at connection type HDMI
[ 8.721668] HDMI: available speakers: FL/FR
[ 8.723564] HDMI: supports coding type LPCM: channels = 2, rates = 32000
44100 48000, bits = 16 20 24
[ 8.725438] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 8.726474] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 8.731039] HDMI: detected monitor SAMSUNG at connection type HDMI
[ 8.731857] HDMI: available speakers: FL/FR
[ 8.732669] HDMI: supports coding type LPCM: channels = 2, rates = 32000
44100 48000, bits = 16 20 24
[ 9.570771] loop: module loaded
[ 12.647202] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.780174] eth0: no IPv6 routers present
[ 618.426955] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
[ 618.427006] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: KCH7710H.86A.0102.2012.1008.1611
board_vendor: Intel Corporation
board_name: DH77DF
board_version: AAG40293-300
** Loaded modules:
binfmt_misc
nfsd
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
joydev
snd
acpi_cpufreq
mperf
ahci
coretemp
libahci
i915
evdev
libata
crc32c_intel
firewire_ohci
scsi_mod
drm_kms_helper
ghash_clmulni_intel
soundcore
firewire_core
drm
crc_itu_t
i2c_algo_bit
psmouse
cryptd
i2c_i801
video
processor
button
pcspkr
serio_raw
i2c_core
iTCO_wdt
iTCO_vendor_support
usbhid
hid
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ehci_hcd
fan
xhci_hcd
thermal
thermal_sys
usbcore
e1000e
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
# do not bring up interface twice--PXE already did it
#allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 4c:72:b9:42:ba:c3 brd ff:ff:ff:ff:ff:ff
inet 192.168.40.62/24 brd 192.168.40.255 scope global eth0
inet6 fe80::4e72:b9ff:fe42:bac3/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 210444809 200766 0 0 0 0 0 28 23227855
83584 0 0 0 0 0 0
*** Protocol statistics:
Ip:
74901 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
74898 incoming packets delivered
76436 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
30 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 30
IcmpMsg:
OutType3: 30
Tcp:
11 active connections openings
1 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
74233 segments received
83006 segments send out
1 segments retransmited
0 bad segments received.
0 resets sent
Udp:
590 packets received
51 packets to unknown port received.
0 packet receive errors
440 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
263 delayed acks sent
8 packets directly queued to recvmsg prequeue.
144 bytes directly received in process context from prequeue
69089 packet headers predicted
3 packets header predicted and directly queued to user
67 acknowledgments not containing data payload received
48356 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
1 other TCP timeouts
IpExt:
InMcastPkts: 26
OutMcastPkts: 14
InBcastPkts: 163
InOctets: 200497435
OutOctets: 21350670
InMcastOctets: 3960
OutMcastOctets: 2997
InBcastOctets: 16240
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller [8086:0162] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7d20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7d3b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network
Connection [8086:1503] (rev 04)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7d39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7d30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 8 [8086:1e1e] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller
[8086:1e4a] (rev 04)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01
[AHCI 1.0])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series
Firewire Controller [1106:3403] (rev 01) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:2034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 045e:00b0 Microsoft Corp. Digital Media Pro Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
ii debian-kernel-handbook 1.0.15
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.2 3.2.32-1
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20121119190233.4017.16255.report...@htpc.betterworld.us
