Your message dated Fri, 09 Nov 2012 05:59:38 +0000
with message-id <1352440778.4728.66.ca...@deadeye.wl.decadent.org.uk>
and subject line Re: Bug#692746: linux-image-3.2.0-4-amd64: cpu load of a
proces significantly increased
has caused the Debian Bug report #692746,
regarding linux-image-3.2.0-4-amd64: cpu load of a proces significantly
increased
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
692746: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692746
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.32-1
Severity: normal
Dear Maintainer,
The load of a realtime proces that I run is increased by more than 50%. With
kernel 3.2.0-2 it was about 13% and since kernel 3.2.0-3 (and 3.2.0-4) it is
around 19%.
The only difference is the kernel that I boot so therefore I think it is
related to the kernel.
Mark
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=ee93b7c8-7d8e-4b18-82b3-14336f5f08d4 ro quiet
** Not tainted
** Kernel log:
[ 2.066055] Refined TSC clocksource calibration: 2400.003 MHz.
[ 2.066062] Switching to clocksource tsc
[ 2.166330] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.166335] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.166780] hub 2-1:1.0: USB hub found
[ 2.166934] hub 2-1:1.0: 8 ports detected
[ 2.437643] usb 2-1.3: new low-speed USB device number 3 using ehci_hcd
[ 2.535900] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
[ 2.535906] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.535911] usb 2-1.3: Product: USB-PS/2 Optical Mouse
[ 2.535914] usb 2-1.3: Manufacturer: Logitech
[ 2.605405] usb 2-1.4: new low-speed USB device number 4 using ehci_hcd
[ 2.673098] ata2.00: failed to resume link (SControl 0)
[ 2.703265] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c31d
[ 2.703271] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.703276] usb 2-1.4: Product: USB Keyboard
[ 2.703279] usb 2-1.4: Manufacturer: Logitech
[ 2.712891] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input0
[ 2.713007] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2.715809] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input1
[ 2.715899] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10
Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input0
[ 2.722289] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input2
[ 2.722382] generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10
Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.4/input1
[ 2.722405] usbcore: registered new interface driver usbhid
[ 2.722407] usbhid: USB HID core driver
[ 3.004617] ata1.01: failed to resume link (SControl 0)
[ 3.160480] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.160500] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 3.169581] ata1.00: ATA-8: WDC WD1600BEVT-00A0RT0, 01.01A01, max UDMA/133
[ 3.169587] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.185563] ata1.00: configured for UDMA/133
[ 3.185899] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVT-0 01.0
PQ: 0 ANSI: 5
[ 3.699500] ata2.01: failed to resume link (SControl 0)
[ 3.711025] ata2.00: SATA link down (SStatus 0 SControl 0)
[ 3.711047] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.715826] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149
GiB)
[ 3.715924] sd 0:0:0:0: [sda] Write Protect is off
[ 3.715928] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.715981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.770580] sda: sda1 sda2 sda3 sda4
[ 3.771203] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.772919] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.475725] udevd[344]: starting version 175
[ 8.048896] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.048904] ACPI: Power Button [PWRB]
[ 8.048960] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.048963] ACPI: Power Button [PWRF]
[ 8.136625] parport_pc 00:05: reported by Plug and Play ACPI
[ 8.136693] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 8.183858] ACPI: Requesting acpi_cpufreq
[ 8.284580] iTCO_vendor_support: vendor-support=0
[ 8.284813] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.337322] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.337431] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 8.337623] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.404048] ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with
ACPI region SMBI [io 0xf000-0xf00f]
[ 8.404051] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 8.549094] [drm] Initialized drm 1.1.0 20060810
[ 8.698582] i915 0000:00:02.0: setting latency timer to 64
[ 8.737762] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 8.737765] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 8.738066] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 8.738071] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.738073] [drm] Driver supports precise vblank timestamp query.
[ 8.738112] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.749963] fixme: max PWM is zero.
[ 9.007491] fbcon: inteldrmfb (fb0) is primary device
[ 9.009145] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync,
-vsync)
[ 9.365729] Console: switching to colour frame buffer device 128x48
[ 9.371098] fb0: inteldrmfb frame buffer device
[ 9.371101] drm: registered panic notifier
[ 9.379160] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 9.388792] acpi device:52: registered as cooling_device4
[ 9.389144] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 9.389209] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.389265] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.573129] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.641628] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 9.641672] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.718930] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.024536] loop: module loaded
[ 13.768881] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.496492] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 16.497341] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.951952] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.492222] RPC: Registered named UNIX socket transport module.
[ 21.492229] RPC: Registered udp transport module.
[ 21.492233] RPC: Registered tcp transport module.
[ 21.492237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.558269] FS-Cache: Loaded
[ 21.588635] FS-Cache: Netfs 'nfs' registered for caching
[ 21.606368] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 21.957731] fuse init (API version 7.17)
[ 22.638928] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 22.638935] e1000e 0000:03:00.0: eth1: 10/100 speed: disabling TSO
[ 22.639657] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 26.398575] lp0: using parport0 (interrupt-driven).
[ 26.415935] ppdev: user-space parallel port driver
[ 26.708912] eth0: no IPv6 routers present
[ 33.629530] eth1: no IPv6 routers present
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 4.6.3
board_vendor: To be filled by O.E.M.
board_name: To be filled by O.E.M.
board_version: To be filled by O.E.M.
** Loaded modules:
ppdev
lp
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
joydev
snd_pcm
snd_page_alloc
coretemp
snd_timer
crc32c_intel
ghash_clmulni_intel
snd
aesni_intel
soundcore
aes_x86_64
aes_generic
cryptd
acpi_cpufreq
psmouse
mperf
i915
drm_kms_helper
drm
i2c_algo_bit
i2c_i801
evdev
i2c_core
serio_raw
iTCO_wdt
pcspkr
iTCO_vendor_support
processor
video
parport_pc
parport
button
thermal_sys
ext2
mbcache
sg
sd_mod
crc_t10dif
usbhid
hid
ata_generic
ata_piix
libata
ehci_hcd
scsi_mod
usbcore
e1000e
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller
[8086:0044] (rev 12)
Subsystem: Intel Corporation Core Processor DRAM Controller [8086:0044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor
Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Core Processor Integrated Graphics
Controller [8086:0046]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f0e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series
Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset HECI
Controller [8086:3b64]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fbc08000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced
Host Controller [8086:3b3c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbc07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio [8086:3b56] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset High
Definition Audio [8086:3b56]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fba00000-fbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb800000-fb9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced
Host Controller [8086:3b34]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbc06000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller [8086:3b07] (rev 06)
Subsystem: Intel Corporation Mobile 5 Series Chipset LPC Interface
Controller [8086:3b07]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4
port SATA IDE Controller [8086:3b2e] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA
IDE Controller [8086:3b2e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f090 [size=16]
Region 5: I/O ports at f080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 06)
Subsystem: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbc05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2
port SATA IDE Controller [8086:3b2d] (rev 06) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA
IDE Controller [8086:3b2d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f030 [size=16]
Region 5: I/O ports at f020 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbb00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fba00000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at fbb20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb900000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fb800000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at fb920000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0
[8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 004: ID 046d:c31d Logitech, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
On Thu, 2012-11-08 at 15:09 +0100, Mark Horsthuis wrote:
> Package: src:linux
> Version: 3.2.32-1
> Severity: normal
>
> Dear Maintainer,
>
> The load of a realtime proces that I run is increased by more than
> 50%. With kernel 3.2.0-2 it was about 13% and since kernel 3.2.0-3
> (and 3.2.0-4) it is around 19%.
> The only difference is the kernel that I boot so therefore I think it
> is related to the kernel.
[...]
CPU frequency scaling is now automatically enabled since version
3.2.21-1 (see bug #664813).
Unless you see real problems such as overruns or higher power
consumption, this is not a bug.
Ben.
--
Ben Hutchings
The program is absolutely right; therefore, the computer must be wrong.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
