Package: linux-2.6
Version: 2.6.32-46
Severity: normal
The latest squeeze kernel fails to detect both RAID and Ethernet
controllers on this system. The current wheezy kernel (used to
bootstrap) and vanilla v3.2.6 (currently running) both work fine.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R720xd
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.2.6
board_vendor: Dell Inc.
board_name: 0VWT90
board_version: A02
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DMI2 [8086:3c00]
(rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 1a [8086:3c02] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dc000000-dc7fffff
Prefetchable memory behind bridge: 00000000d9000000-00000000d90fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 1b [8086:3c03] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dc800000-dcffffff
Prefetchable memory behind bridge: 00000000d9100000-00000000d91fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 2a [8086:3c04] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.2 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 2c [8086:3c06] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: dd000000-ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 3a in PCI Express Mode [8086:3c08] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 System peripheral [0880]: Intel Corporation Sandy Bridge Address Map,
VTd_Misc, System Management [8086:3c28] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:05.2 System peripheral [0880]: Intel Corporation Sandy Bridge Control Status
and Global Errors [8086:3c2a] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.0 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Virtual Root
Port [8086:1d3e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 Communication controller [0780]: Intel Corporation Patsburg HECI
Controller #1 [8086:1d3a] (rev 05)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Region 0: Memory at df8fb000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.1 Communication controller [0780]: Intel Corporation Patsburg HECI
Controller #2 [8086:1d3b] (rev 05)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at df8fc000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation Patsburg USB2 Enhanced Host
Controller #2 [8086:1d2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df8fd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1c.0 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Root Port 1
[8086:1d10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Root Port 8
[8086:1d1e] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=0c, sec-latency=0
Memory behind bridge: de000000-df7fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation Patsburg USB2 Enhanced Host
Controller #1 [8086:1d26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df8fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Patsburg LPC Controller
[8086:1d41] (rev 05)
Subsystem: Dell Device [1028:0528]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
01:00.0 Ethernet controller [0200]: Broadcom Corporation Device [14e4:165f]
Subsystem: Dell Device [1028:1f5b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at d91a0000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at d91b0000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at d91c0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at dc800000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
01:00.1 Ethernet controller [0200]: Broadcom Corporation Device [14e4:165f]
Subsystem: Dell Device [1028:1f5b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 38
Region 0: Memory at d91d0000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at d91e0000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at d91f0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d9100000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.0 Ethernet controller [0200]: Broadcom Corporation Device [14e4:165f]
Subsystem: Dell Device [1028:1f5b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at d90a0000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at d90b0000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at d90c0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at dc000000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.1 Ethernet controller [0200]: Broadcom Corporation Device [14e4:165f]
Subsystem: Dell Device [1028:1f5b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 36
Region 0: Memory at d90d0000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at d90e0000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at d90f0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d9000000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: tg3
03:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS TB
[1000:005b] (rev 01)
Subsystem: Dell PERC H510 Mini (for monolithics) [1028:1f38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at ddffc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at ddf80000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at dd000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
08:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS]
[1912:0013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
BIST result: 00
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=0
Memory behind bridge: de000000-df7fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
09:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS]
[1912:0013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
BIST result: 00
Bus: primary=09, secondary=0a, subordinate=0b, sec-latency=0
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
09:01.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS]
[1912:0013] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
BIST result: 00
Bus: primary=09, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: df700000-df7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0a:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe-PCI Bridge
[PPB] [1912:0012] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
BIST result: 00
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0b:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. G200eR2
[102b:0534] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0528]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at deffc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
3f:08.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 0
[8086:3c80] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:09.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 1
[8086:3c90] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0a.0 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 0 [8086:3cc0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0a.1 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 1 [8086:3cc1] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0a.2 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 2 [8086:3cc2] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0a.3 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 3 [8086:3cd0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0b.0 System peripheral [0880]: Intel Corporation Sandy Bridge Interrupt
Control Registers [8086:3ce0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0b.3 System peripheral [0880]: Intel Corporation Sandy Bridge Semaphore and
Scratchpad Configuration Registers [8086:3ce3] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0c.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0c.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0c.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0c.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller System Address Decoder 0 [8086:3cf4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0c.7 System peripheral [0880]: Intel Corporation Sandy Bridge System Address
Decoder [8086:3cf6] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0d.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0d.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0d.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0d.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller System Address Decoder 1 [8086:3cf5] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0e.0 System peripheral [0880]: Intel Corporation Sandy Bridge Processor Home
Agent [8086:3ca0] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0e.1 Performance counters [1101]: Intel Corporation Sandy Bridge Processor
Home Agent Performance Monitoring [8086:3c46] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:0f.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Registers [8086:3ca8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller RAS Registers [8086:3c71] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 0 [8086:3caa] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 1 [8086:3cab] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 2 [8086:3cac] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 3 [8086:3cad] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:0f.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 4 [8086:3cae] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:10.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 0 [8086:3cb0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 1 [8086:3cb1] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 0 [8086:3cb2] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 1 [8086:3cb3] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 2 [8086:3cb4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 3 [8086:3cb5] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 2 [8086:3cb6] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:10.7 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 3 [8086:3cb7] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
3f:11.0 System peripheral [0880]: Intel Corporation Sandy Bridge DDRIO
[8086:3cb8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:13.0 System peripheral [0880]: Intel Corporation Sandy Bridge R2PCIe
[8086:3ce4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:13.1 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to PCI
Express Performance Monitor [8086:3c43] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:13.4 Performance counters [1101]: Intel Corporation Sandy Bridge QuickPath
Interconnect Agent Ring Registers [8086:3ce6] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:13.5 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to
QuickPath Interconnect Link 0 Performance Monitor [8086:3c44] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
3f:13.6 System peripheral [0880]: Intel Corporation Sandy Bridge Ring to
QuickPath Interconnect Link 1 Performance Monitor [8086:3c45] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
40:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 1a [8086:3c02] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=41, subordinate=41, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:02.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 2a [8086:3c04] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=42, subordinate=42, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:03.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 3a in PCI Express Mode [8086:3c08] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=43, subordinate=43, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:03.2 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root
Port 3c [8086:3c0a] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=40, secondary=44, subordinate=44, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:05.0 System peripheral [0880]: Intel Corporation Sandy Bridge Address Map,
VTd_Misc, System Management [8086:3c28] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:05.2 System peripheral [0880]: Intel Corporation Sandy Bridge Control Status
and Global Errors [8086:3c2a] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:08.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 0
[8086:3c80] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:09.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 1
[8086:3c90] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0a.0 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 0 [8086:3cc0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0a.1 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 1 [8086:3cc1] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0a.2 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 2 [8086:3cc2] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0a.3 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control
Unit 3 [8086:3cd0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0b.0 System peripheral [0880]: Intel Corporation Sandy Bridge Interrupt
Control Registers [8086:3ce0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0b.3 System peripheral [0880]: Intel Corporation Sandy Bridge Semaphore and
Scratchpad Configuration Registers [8086:3ce3] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0c.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0c.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0c.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0c.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller System Address Decoder 0 [8086:3cf4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0c.7 System peripheral [0880]: Intel Corporation Sandy Bridge System Address
Decoder [8086:3cf6] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0d.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0d.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0d.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast
Register 0 [8086:3ce8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0d.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller System Address Decoder 1 [8086:3cf5] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0e.0 System peripheral [0880]: Intel Corporation Sandy Bridge Processor Home
Agent [8086:3ca0] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0e.1 Performance counters [1101]: Intel Corporation Sandy Bridge Processor
Home Agent Performance Monitoring [8086:3c46] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:0f.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Registers [8086:3ca8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller RAS Registers [8086:3c71] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 0 [8086:3caa] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 1 [8086:3cab] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 2 [8086:3cac] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 3 [8086:3cad] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:0f.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Target Address Decoder 4 [8086:3cae] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:10.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 0 [8086:3cb0] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 1 [8086:3cb1] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 0 [8086:3cb2] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 1 [8086:3cb3] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 2 [8086:3cb4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller Channel 0-3 Thermal Control 3 [8086:3cb5] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 2 [8086:3cb6] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:10.7 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated
Memory Controller ERROR Registers 3 [8086:3cb7] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
7f:11.0 System peripheral [0880]: Intel Corporation Sandy Bridge DDRIO
[8086:3cb8] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:13.0 System peripheral [0880]: Intel Corporation Sandy Bridge R2PCIe
[8086:3ce4] (rev 07)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:13.1 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to PCI
Express Performance Monitor [8086:3c43] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:13.4 Performance counters [1101]: Intel Corporation Sandy Bridge QuickPath
Interconnect Agent Ring Registers [8086:3ce6] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:13.5 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to
QuickPath Interconnect Link 0 Performance Monitor [8086:3c44] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7f:13.6 System peripheral [0880]: Intel Corporation Sandy Bridge Ring to
QuickPath Interconnect Link 1 Performance Monitor [8086:3c45] (rev 07)
Subsystem: Dell Device [1028:0528]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0624:0249 Avocent Corp.
Bus 001 Device 004: ID 0624:0248 Avocent Corp.
Bus 001 Device 003: ID 0424:2512 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.6-hw2 (SMP w/24 CPU cores)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-46 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-46 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii lilo 1:22.8-10 LInux LOader - The Classic OS load
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
ii firmware-bnx2 0.35~bpo60+1 Binary firmware for Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--
Edward Allcutt
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/alpine.deb.2.02.1210161245260.20...@pandora.retrosnub.co.uk
