Package: src:linux
Version: 3.2.20-1
Severity: normal
Hi,
I tried to use linux 3.2.0 as dom0 with Xen 4.0 from squeeze. Almost
everything worked properly (Debian 6.0 domU, rhel5, WinOS) except the
rhel4 domU. With or without pygrub the disk image doesn't appear to get
loaded at all. All rhel4 domU are working properly with the 2.6-xen kernel
from Debian 6.0.
(these guests were migrated from a RHEL 5.8 Xen dom0)
Cheers
-- Package-specific info:
** Version:
Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.20-1~bpo60+1)
(debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP
Fri Jun 29 20:42:29 UTC 2012
** Command line:
placeholder root=UUID=5f9b05f8-13b9-4632-a9d5-5a1836388071 ro panic=1200
nomodeset console=ttyS1,57600n8 quiet
** Not tainted
** Kernel log:
[ 1.477082] hub 1-7:1.0: 4 ports detected
[ 1.548100] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
[ 1.642096] usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000
[ 1.642099] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.642102] usb 1-1.1: Product: DRAC5
[ 1.642104] usb 1-1.1: Manufacturer: Dell
[ 1.642106] usb 1-1.1: SerialNumber: 0000000
[ 1.649767] input: Dell DRAC5 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[ 1.649900] generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10
Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0
[ 1.651224] input: Dell DRAC5 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[ 1.651440] generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10
Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1
[ 1.651522] usbcore: registered new interface driver usbhid
[ 1.651524] usbhid: USB HID core driver
[ 3.776042] floppy0: no floppy controllers found
[ 6.808037] floppy0: no floppy controllers found
[ 6.889220] device-mapper: uevent: version 1.0.3
[ 6.889589] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 7.048218] PM: Starting manual resume from disk
[ 7.048221] PM: Hibernation image partition 8:5 present
[ 7.048222] PM: Looking for hibernation image.
[ 7.048485] PM: Image not found (code -22)
[ 7.048487] PM: Hibernation image not present or could not be loaded.
[ 7.103411] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.052911] udev[296]: starting version 164
[ 8.361413] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 8.364170] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.364173] ACPI: Power Button [PWRF]
[ 8.454006] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.456849] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.482100] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 8.507686] intel_rng: FWH not detected
[ 8.536477] EDAC MC: Ver: 2.1.0
[ 8.546661] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV
0000:00:10.0
[ 8.546681] EDAC PCI0: Giving out device to module 'i5000_edac' controller
'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 8.707557] [drm] Initialized drm 1.1.0 20060810
[ 8.767202] [drm] VGACON disable radeon kernel modesetting.
[ 8.767406] xen: registering gsi 19 triggering 0 polarity 1
[ 8.767425] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 8.767434] pci 0000:0e:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.767677] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.767680] [drm] No driver support for vblank timestamp query.
[ 8.767683] [drm] Initialized radeon 1.33.0 20080528 for 0000:0e:0d.0 on
minor 0
[ 11.472096] floppy0: no floppy controllers found
[ 14.536049] floppy0: no floppy controllers found
[ 15.019771] Adding 19529724k swap on /dev/sda5. Priority:-1 extents:1
across:19529724k
[ 15.027820] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 15.320849] EXT4-fs (sda2): re-mounted. Opts: user_xattr,errors=remount-ro
[ 15.415072] loop: module loaded
[ 15.433919] ipmi message handler version 39.2
[ 15.440922] IPMI System Interface driver.
[ 15.440969] ipmi_si: probing via SMBIOS
[ 15.440971] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
[ 15.440973] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 15.440977] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o
address 0xca8, slave address 0x20, irq 0
[ 15.685155] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id:
0x0100, dev_id: 0x20)
[ 15.685163] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[ 15.688350] ipmi device interface
[ 17.319700] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 17.362205] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 17.428354] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 17.475031] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 17.508801] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 18.131841] Bridge firewalling registered
[ 18.136906] device eth0 entered promiscuous mode
[ 18.308022] bnx2 0000:03:00.0: eth0: using MSI
[ 18.309855] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.313754] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 21.482370] bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full
duplex
[ 21.484241] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.484291] br0: port 1(eth0) entering forwarding state
[ 21.484297] br0: port 1(eth0) entering forwarding state
[ 21.485899] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.022984] Event-channel device installed.
[ 23.170638] XENBUS: Unable to read cpu state
[ 23.170725] XENBUS: Unable to read cpu state
[ 23.170853] XENBUS: Unable to read cpu state
[ 23.170927] XENBUS: Unable to read cpu state
[ 23.171008] XENBUS: Unable to read cpu state
[ 23.171159] XENBUS: Unable to read cpu state
[ 23.171288] XENBUS: Unable to read cpu state
[ 23.171389] XENBUS: Unable to read cpu state
[ 24.352855] sshd (1247): /proc/1247/oom_adj is deprecated, please use
/proc/1247/oom_score_adj instead.
[ 26.293146] Ebtables v2.0 registered
[ 26.337766] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.381602] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 31.728014] eth0: no IPv6 routers present
[ 31.744009] br0: no IPv6 routers present
[ 35.268015] megaraid_sas 0000:01:00.0: vpd r/w failed. This is likely a
firmware bug on this device. Contact the card vendor for a firmware update.
[ 35.634755] Fusion MPT base driver 3.04.20
[ 35.634757] Copyright (c) 1999-2008 LSI Corporation
[ 35.645122] Fusion MPT misc device (ioctl) driver 3.04.20
[ 35.645306] mptctl: Registered with Fusion MPT base driver
[ 35.645308] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 35.710446] mpt2sas version 10.100.00.00 loaded
[ 36.512014] br0: port 1(eth0) entering forwarding state
[ 37.391327] megasas: fasync_helper was not called first
[ 142.185595] device vif1.0 entered promiscuous mode
[ 142.189837] ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 142.268757] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 142.290516] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and
POSTROUTING chains for non-bridged traffic is not supported anymore.
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge 2900
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 2.7.0
board_vendor: Dell Inc.
board_name: 0NX642
board_version: A05
** Loaded modules:
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
xt_physdev
xen_netback
xen_blkback
mpt2sas
scsi_transport_sas
raid_class
mptctl
mptbase
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
dell_rbu
ebtables
x_tables
xen_evtchn
xenfs
bridge
stp
coretemp
ipmi_devintf
ipmi_si
ipmi_msghandler
loop
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
i5000_edac
edac_core
i5k_amb
tpm_tis
tpm
rng_core
tpm_bios
dcdbas
power_supply
shpchp
snd_pcm
snd_timer
snd
soundcore
snd_page_alloc
psmouse
serio_raw
evdev
joydev
processor
button
pcspkr
thermal_sys
ext4
mbcache
jbd2
crc16
dm_mod
usbhid
hid
sd_mod
crc_t10dif
ses
enclosure
uhci_hcd
ehci_hcd
usbcore
usb_common
megaraid_sas
scsi_mod
bnx2
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000X Chipset Memory Controller
Hub [8086:25c0] (rev 12)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 2 [8086:25e2] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
Memory behind bridge: f2000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 3 [8086:25e3] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 4 [8086:25e4] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 5 [8086:25e5] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fc300000-fc4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8
Port 6-7 [8086:25f9] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 7 [8086:25e7] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 12)
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 12)
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 12)
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f1] (rev 12)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f3] (rev 12)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f5] (rev 12)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f6] (rev 12)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at cce0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at ccc0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at cca0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01b1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 4: I/O ports at cc80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fc100000-fc2fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
Interface Controller [8086:2670] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
01:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078
[1000:0060] (rev 04)
Subsystem: Dell PERC 6/i Integrated RAID Controller [1028:1f0c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc480000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=256]
Region 3: Memory at fc440000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fc300000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103]
(rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 353
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
04:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=08, sec-latency=0
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
04:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to
PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=09, subordinate=09, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=07, sec-latency=0
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
06:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103]
(rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Dell Device [1028:01b1]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
0e:0d.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000
[1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01b1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at dc00 [size=256]
Region 2: Memory at fc2d0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc100000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 413c:0000 Dell Computer Corp. DRAC 5 Virtual Keyboard
and Mouse
Bus 001 Device 003: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0
"TetraHub"
Bus 001 Device 002: ID 413c:a001 Dell Computer Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-0.bpo.2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-0.bpo.2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-0.bpo.2-amd64 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
Versions of packages linux-image-3.2.0-0.bpo.2-amd64 suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-0.bpo.2-amd64 is related to:
pn firmware-atheros <none> (no description available)
ii firmware-bnx2 0.35~bpo60+1 Binary firmware for Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
ii xen-hypervisor-4.0-amd64 [ 4.0.1-5.2 The Xen Hypervisor on AMD64
-- debconf information:
linux-image-3.2.0-0.bpo.2-amd64/postinst/depmod-error-initrd-3.2.0-0.bpo.2-amd64:
false
* linux-image-3.2.0-0.bpo.2-amd64/postinst/missing-firmware-3.2.0-0.bpo.2-amd64:
linux-image-3.2.0-0.bpo.2-amd64/prerm/removing-running-kernel-3.2.0-0.bpo.2-amd64:
true
linux-image-3.2.0-0.bpo.2-amd64/postinst/ignoring-ramdisk:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120724142250.2255.80045.report...@wildebeest.museglobal.com
