--- Begin Message ---
Package: linux-2.6
Version: 3.0.0-3
Severity: important
Dear Maintainer,
I have some nonstandard console settings that require running /etc/init.d/kbd
to configure console.
Using the newer console-setup is a non-starter for reasons that are not
relevant at this time.
Somewhere in the last two months (it's hard to tell exactly), there was a
regression such that
after restoring from hibernate, some console settings are not restored
correctly. Running
/etc/init.d/kbd start successfully restores them.
Bug might be related to #647153. I had to reapply my original patch as the
maintainer patch did not work for me.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
** Command line:
auto BOOT_IMAGE=Lin ro root=801 resume=/dev/sda5
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[98776.388039] sr 0:0:0:0: [sr0] Add. Sense: Read of scrambled sector without
authentication
[98776.388047] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[98776.388055] end_request: I/O error, dev sr0, sector 4096
[98776.388060] Buffer I/O error on device sr0, logical block 512
[104211.293746] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[104211.293752] PM: Marking nosave pages: 00000000d7f90000 - 0000000100000000
[104211.294608] PM: Marking nosave pages: 00000000cc000000 - 00000000d0000000
[104211.294861] PM: Basic memory bitmaps created
[104211.294863] PM: Syncing filesystems ... done.
[104211.307845] Freezing user space processes ... (elapsed 0.01 seconds) done.
[104211.324293] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[104211.340610] PM: Preallocating image memory... done (allocated 474682 pages)
[104211.663624] PM: Allocated 1898728 kbytes in 0.32 seconds (5933.52 MB/s)
[104211.663662] Suspending console(s) (use no_console_suspend to debug)
[104211.663869] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[104211.663960] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[104211.664466] serial 00:0b: disabled
[104211.664473] serial 00:0b: wake-up capability disabled by ACPI
[104211.664796] parport_pc 00:05: disabled
[104211.665152] ata2: port disabled. ignoring.
[104211.896227] HDA Intel 0000:00:07.0: PCI INT A disabled
[104211.912255] HDA Intel 0000:00:07.0: power state changed by ACPI to D3
[104211.912289] PM: freeze of devices complete after 248.581 msecs
[104211.912873] PM: late freeze of devices complete after 0.580 msecs
[104211.912940] ACPI: Preparing to enter system sleep state S4
[104211.914039] PM: Saving platform NVS memory
[104211.914644] Disabling non-boot CPUs ...
[104211.916090] CPU 1 is now offline
[104211.916791] PM: Creating hibernation image:
[104211.920062] PM: Need to copy 475120 pages
[104211.920062] PM: Normal pages needed: 475120 + 1024, available pages: 1572515
[104211.920062] PM: Restoring platform NVS memory
[104211.920062] PCI-DMA: Resuming GART IOMMU
[104211.920062] PCI-DMA: Restoring GART aperture settings
[104211.920062] Enabling non-boot CPUs ...
[104211.920062] Booting Node 0 Processor 1 APIC 0x1
[104211.920062] smpboot cpu 1: start_ip = 99000
[104211.916052] Switch to broadcast mode on CPU1
[104212.008348] NMI watchdog enabled, takes one hw-pmu counter.
[104212.012222] Switched to NOHz mode on CPU #1
[104212.012272] CPU1 is up
[104212.012626] ACPI: Waking up from system sleep state S4
[104212.014256] pata_amd 0000:00:06.0: restoring config space at offset 0x1
(was 0xb00001, writing 0xb00005)
[104212.014280] HDA Intel 0000:00:07.0: restoring config space at offset 0x1
(was 0xb00006, writing 0xb00002)
[104212.014365] ahci 0000:00:09.0: restoring config space at offset 0x1 (was
0xb00503, writing 0xb00507)
[104212.014871] nvidia 0000:02:00.0: restoring config space at offset 0xc (was
0xfebe0000, writing 0x0)
[104212.014878] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was
0x100107, writing 0x100007)
[104212.014978] PM: early restore of devices complete after 1.064 msecs
[104212.151091] ohci_hcd 0000:00:02.0: setting latency timer to 64
[104212.151132] ehci_hcd 0000:00:02.1: setting latency timer to 64
[104212.151148] ohci_hcd 0000:00:04.0: setting latency timer to 64
[104212.151158] ehci_hcd 0000:00:04.1: setting latency timer to 64
[104212.151172] pata_amd 0000:00:06.0: setting latency timer to 64
[104212.151239] pci 0000:00:08.0: setting latency timer to 64
[104212.151248] ahci 0000:00:09.0: setting latency timer to 64
[104212.151545] pci 0000:00:0b.0: setting latency timer to 64
[104212.152768] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152774] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152780] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152784] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152793] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
(level, low) -> IRQ 21
[104212.152798] HDA Intel 0000:00:07.0: setting latency timer to 64
[104212.154231] ata2: port disabled. ignoring.
[104212.155346] parport_pc 00:05: activated
[104212.156548] serial 00:0b: activated
[104212.157140] sd 2:0:0:0: [sda] Starting disk
[104212.157204] sd 4:0:0:0: [sdb] Starting disk
[104212.210022] usb usb4: root hub lost power or was reset
[104212.210047] usb usb2: root hub lost power or was reset
[104212.210056] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[104212.212058] usb usb3: root hub lost power or was reset
[104212.213763] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[104212.213978] forcedeth 0000:00:0a.0: eth0: no link during initialization
[104212.214316] usb usb1: root hub lost power or was reset
[104212.214326] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[104212.316563] ata1.01: ACPI cmd ef/03:21:00:00:00:b0 (SET FEATURES) filtered
out
[104212.316568] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered
out
[104212.316572] ata1.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[104212.324512] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered
out
[104212.324518] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[104212.324530] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000
(0xc5000000) ACPI=0x1f01f (30:120:0x11)
[104212.324535] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0
(0xc5000000) ACPI=0x39f (30:120:0x11)
[104212.340434] ata1.00: configured for UDMA/66
[104212.356490] ata1.01: configured for MWDMA2
[104212.472213] ata7: SATA link down (SStatus 0 SControl 300)
[104212.472228] ata8: SATA link down (SStatus 0 SControl 300)
[104212.472242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[104212.472254] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[104212.474387] ata3.00: configured for UDMA/133
[104212.475068] ata5.00: configured for UDMA/133
[104212.476212] ata4: SATA link down (SStatus 0 SControl 300)
[104212.476226] ata6: SATA link down (SStatus 0 SControl 300)
[104212.836222] usb 3-1: reset low speed USB device number 2 using ohci_hcd
[104213.504218] usb 4-1: reset low speed USB device number 2 using ohci_hcd
[104213.863288] PM: restore of devices complete after 1712.271 msecs
[104213.865842] PM: Image restored successfully.
[104213.865844] Restarting tasks ... done.
[104213.869238] PM: Basic memory bitmaps freed
[104213.869246] video LNXVIDEO:00: Restoring backlight state
[104214.907483] forcedeth 0000:00:0a.0: eth0: link up
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1009
board_vendor: ASUSTeK Computer INC.
board_name: M3N78-VM
board_version: Rev X.0x
** Loaded modules:
Module Size Used by
snd_seq_dummy 12503 0
sha1_generic 12575 0
arc4 12458 0
ecb 12737 0
ppp_mppe 12968 0
ppp_async 17398 0
crc_ccitt 12347 1 ppp_async
ppp_generic 26709 2 ppp_async,ppp_mppe
slhc 12670 1 ppp_generic
pci_stub 12429 1
vboxpci 19059 0
vboxnetadp 25490 0
vboxnetflt 23595 0
vboxdrv 194320 3 vboxnetflt,vboxnetadp,vboxpci
binfmt_misc 13040 1
uinput 17469 1
fuse 66430 1
snd_hda_codec_hdmi 26321 1
snd_hda_codec_via 56995 1
nvidia 12288281 40
snd_hda_intel 26140 2
snd_hda_codec 72699 3
snd_hda_intel,snd_hda_codec_via,snd_hda_codec_hdmi
snd_hwdep 13186 1 snd_hda_codec
snd_pcm_oss 41257 0
snd_mixer_oss 17969 1 snd_pcm_oss
snd_pcm 68104 4
snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 13043 2 snd_pcm,snd_hda_intel
snd_seq_midi 12848 0
snd_seq_midi_event 13316 1 snd_seq_midi
snd_rawmidi 23297 1 snd_seq_midi
snd_seq 45208 3 snd_seq_midi_event,snd_seq_midi,snd_seq_dummy
snd_seq_device 13137 4 snd_seq,snd_rawmidi,snd_seq_midi,snd_seq_dummy
snd_timer 22581 2 snd_seq,snd_pcm
snd 52823 16
snd_timer,snd_seq_device,snd_seq,snd_rawmidi,snd_pcm,snd_mixer_oss,snd_pcm_oss,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_via,snd_hda_codec_hdmi
i2c_nforce2 12584 0
i2c_core 23909 2 i2c_nforce2,nvidia
shpchp 31343 0
pci_hotplug 27232 1 shpchp
soundcore 13152 1 snd
k8temp 12531 0
edac_mce_amd 17103 0
edac_core 35343 0
mxm_wmi 12473 0
asus_atk0110 17294 0
psmouse 55656 0
evdev 17558 11
processor 27942 0
video 17707 0
thermal_sys 17949 2 video,processor
button 12930 0
parport_pc 22395 0
parport 31929 1 parport_pc
wmi 13243 1 mxm_wmi
serio_raw 12846 0
ext3 114399 3
mbcache 13066 1 ext3
jbd 43355 1 ext3
usbhid 40516 0
hid 73172 1 usbhid
sd_mod 36259 6
sr_mod 21811 0
cdrom 35093 1 sr_mod
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
floppy 53265 0
ohci_hcd 26576 0
ahci 25089 4
libahci 22767 1 ahci
pata_amd 13276 0
libata 149043 4 pata_amd,libahci,ahci,ata_generic
ehci_hcd 40090 0
scsi_mod 162442 3 libata,sr_mod,sd_mod
usbcore 128338 4 ehci_hcd,ohci_hcd,usbhid
forcedeth 49427 0
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge
[10de:075c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 0900 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus
[10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 0e00 [size=64]
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200]
Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fcf80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI
USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fcf7e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI
USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fcf7fc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI
USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fcf7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI
USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fcf7f800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE
[10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S
High Definition Audio [10de:0774] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge
[10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA
Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at d480 [size=8]
Region 1: I/O ports at d400 [size=4]
Region 2: I/O ports at d080 [size=8]
Region 3: I/O ports at d000 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fcf76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet
[10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fcf7c000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c880 [size=8]
Region 2: Memory at fcf7f400 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fcf7f000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express
Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-febfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express
Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express
Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200]
[10de:0849] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at fa000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ec00 [size=128]
[virtual] Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse
Bus 004 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.44
it initramfs-tools [linux-initramfs-tool] 0.106
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii lilo 1:23.2-4
pn linux-doc-3.0.0 <none>
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
--- End Message ---
