Package: linux-2.6
Version: 2.6.32-45
Severity: normal
File: /lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko
I've just installed a second hand AverMedia Studio 303 which works under
Windows. However
modprobe cx88xx card=6
results in
FATAL: Error inserting cx88xx
(/lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko): Invalid
argument
and
[ 3771.091382] cx88xx: `' invalid for parameter `card'
Regards
JSB
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-45) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=a4d23e76-488c-483b-89fc-33ebf840f559 ro quiet
** Not tainted
** Kernel log:
[ 8.240640] [drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 2 tag
0xff
[ 8.240644] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
[ 8.240647] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 03011312 00000000
[ 8.240650] [drm] nouveau 0000:00:05.0: Raw DCB entry 2: 020023f1 0040c080
[ 8.240656] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset
0xDD1D
[ 8.240730] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset
0xDE74
[ 8.240733] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset
0xDE75
[ 8.241090] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset
0xDFF7
[ 8.241095] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset
0xE040
[ 8.257783] [TTM] Zone kernel: Available graphics memory: 436412 kiB.
[ 8.257786] [TTM] Zone highmem: Available graphics memory: 1670784 kiB.
[ 8.257799] [drm] nouveau 0000:00:05.0: 32 MiB VRAM
[ 8.260055] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[ 8.260474] [drm] nouveau 0000:00:05.0: Allocating FIFO number 0
[ 8.261111] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised
FIFO 0
[ 8.261117] [drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0
[ 8.261123] [drm] nouveau 0000:00:05.0: Saving VGA fonts
[ 8.278107] usb 2-1: device descriptor read/all, error -62
[ 8.297544] [drm] nouveau 0000:00:05.0: Detected a VGA connector
[ 8.297592] [drm] nouveau 0000:00:05.0: Detected a DVI-D connector
[ 8.297617] [drm] nouveau 0000:00:05.0: Detected a TV connector
[ 8.298526] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 8.298530] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on tmds encoder
(output 1)
[ 8.298533] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder
(output 2)
[ 8.320569] cx88xx: `' invalid for parameter `card'
[ 8.336028] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 8.468386] [drm] nouveau 0000:00:05.0: allocated 1920x1200 fb: 0x49000, bo
f6579400
[ 8.482855] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 8.482859] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0
using output B
[ 8.493701] Console: switching to colour frame buffer device 240x75
[ 8.509556] fb0: nouveaufb frame buffer device
[ 8.509558] registered panic notifier
[ 8.509565] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on
minor 0
[ 8.960806] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 8.960813] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22
(level, low) -> IRQ 22
[ 8.960817] hda_intel: Disable MSI for Nvidia chipset
[ 8.960855] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 9.012020] usb 2-1: new full speed USB device using ohci_hcd and address 10
[ 9.574772] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:10.1/input/input5
[ 9.890039] usb 2-1: device descriptor read/all, error -62
[ 9.949051] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 10.309585] Adding 1012052k swap on /dev/sda5. Priority:-1 extents:1
across:1012052k
[ 10.625023] usb 2-1: new full speed USB device using ohci_hcd and address 12
[ 10.748228] EXT3 FS on sda6, internal journal
[ 10.891547] loop: module loaded
[ 11.509046] usb 2-1: device descriptor read/all, error -62
[ 11.569037] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 12.096613] kjournald starting. Commit interval 5 seconds
[ 12.096780] EXT3 FS on sda2, internal journal
[ 12.096786] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.115957] kjournald starting. Commit interval 5 seconds
[ 12.116136] EXT3 FS on sda3, internal journal
[ 12.116140] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.232023] usb 2-1: new full speed USB device using ohci_hcd and address 14
[ 13.082052] usb 2-1: New USB device found, idVendor=046d, idProduct=0a12
[ 13.082056] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.082060] usb 2-1: Product: Logitech Wireless Headset
[ 13.082062] usb 2-1: Manufacturer: Logitech
[ 13.082173] usb 2-1: configuration #1 chosen from 1 choice
[ 13.209843] usbcore: registered new interface driver hiddev
[ 13.219344] input: Logitech Logitech Wireless Headset as
/devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.3/input/input6
[ 13.219484] generic-usb 0003:046D:0A12.0001: input,hiddev0,hidraw0: USB HID
v1.01 Device [Logitech Logitech Wireless Headset] on usb-0000:00:0b.0-1/input3
[ 13.219516] usbcore: registered new interface driver usbhid
[ 13.219652] usbhid: v2.6:USB HID core driver
[ 13.391157] fuse init (API version 7.13)
[ 13.407484] usbcore: registered new interface driver snd-usb-audio
[ 18.810611] Bluetooth: Core ver 2.15
[ 18.810681] NET: Registered protocol family 31
[ 18.810683] Bluetooth: HCI device and connection manager initialized
[ 18.810687] Bluetooth: HCI socket layer initialized
[ 19.241327] Bluetooth: L2CAP ver 2.14
[ 19.241331] Bluetooth: L2CAP socket layer initialized
[ 19.436032] Bluetooth: RFCOMM TTY layer initialized
[ 19.436039] Bluetooth: RFCOMM socket layer initialized
[ 19.436042] Bluetooth: RFCOMM ver 1.11
[ 19.436236] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.436239] Bluetooth: BNEP filters: protocol multicast
[ 19.504566] Bridge firewalling registered
[ 20.273025] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.273028] Bluetooth: SCO socket layer initialized
[ 22.876848] lp0: using parport0 (interrupt-driven).
[ 23.027651] ppdev: user-space parallel port driver
[ 25.445287] [drm] nouveau 0000:00:05.0: Allocating FIFO number 1
[ 25.445794] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised
FIFO 1
[ 27.690580] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4000+ processors (2 cpu cores) (version 2.20.00)
[ 27.690600] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects
found.
[ 27.690601] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 30.012255] vboxdrv: Found 2 processor cores.
[ 30.012857] vboxdrv: fAsync=1 offMin=0x780a5 offMax=0x780a5
[ 30.012924] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is
'normal'.
[ 30.012927] vboxdrv: Successfully loaded version 4.1.18 (interface
0x00190000).
[ 30.358557] vboxpci: IOMMU not found (not compiled)
[ 30.437014] eth0: no IPv6 routers present
[ 72.424719] kjournald starting. Commit interval 5 seconds
[ 72.424735] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 72.426039] EXT3 FS on sdb1, internal journal
[ 72.426049] EXT3-fs: mounted filesystem with ordered data mode.
[ 232.081024] cx88xx: `' invalid for parameter `card'
[ 784.440593] cx88xx: `' invalid for parameter `card'
[ 807.939001] cx88xx: `' invalid for parameter `card'
** Model information
not available
** Loaded modules:
Module Size Used by
pci_stub 889 1
vboxpci 11533 0
vboxnetadp 18075 0
vboxnetflt 13941 0
vboxdrv 164303 3 vboxpci,vboxnetadp,vboxnetflt
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_stats 1997 0
cpufreq_userspace 1480 0
ppdev 4058 0
lp 5570 0
sco 5885 2
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
rfcomm 25199 0
l2cap 21721 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
rfkill 10264 2 bluetooth
binfmt_misc 4907 1
fuse 44272 1
snd_usb_audio 50670 0
joydev 6739 0
snd_usb_lib 11192 1 snd_usb_audio
usbhid 28016 0
hid 50909 1 usbhid
loop 9769 0
firewire_sbp2 9647 0
snd_hda_codec_analog 45530 1
snd_hda_intel 16823 1
snd_wavefront 24702 0
snd_cs4236 21379 0
snd_wss_lib 16653 2 snd_wavefront,snd_cs4236
snd_hda_codec 46062 2 snd_hda_codec_analog,snd_hda_intel
snd_opl3_lib 6022 2 snd_wavefront,snd_cs4236
snd_mpu401 3604 0
snd_mpu401_uart 4067 3 snd_wavefront,snd_cs4236,snd_mpu401
snd_seq_midi 3576 0
snd_rawmidi 12513 4
snd_usb_lib,snd_wavefront,snd_mpu401_uart,snd_seq_midi
ir_common 22187 0
tveeprom 9393 0
snd_hwdep 4054 4
snd_usb_audio,snd_wavefront,snd_hda_codec,snd_opl3_lib
nouveau 314888 2
snd_seq_midi_event 3684 1 snd_seq_midi
ttm 33502 1 nouveau
v4l2_common 9820 0
drm_kms_helper 18569 1 nouveau
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47222 6
snd_usb_audio,snd_hda_intel,snd_cs4236,snd_wss_lib,snd_hda_codec,snd_pcm_oss
videodev 25637 1 v4l2_common
v4l1_compat 10250 1 videodev
drm 112053 4 nouveau,ttm,drm_kms_helper
snd_timer 12270 4 snd_wss_lib,snd_opl3_lib,snd_seq,snd_pcm
snd_seq_device 3673 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
ns558 1599 0
videobuf_dma_sg 7203 0
k8temp 2551 0
i2c_algo_bit 3493 1 nouveau
psmouse 44837 0
snd_page_alloc 5045 3 snd_hda_intel,snd_wss_lib,snd_pcm
gameport 6061 2 ns558
snd 34415 20
snd_usb_audio,snd_hda_codec_analog,snd_hda_intel,snd_wavefront,snd_cs4236,snd_wss_lib,snd_hda_codec,snd_opl3_lib,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_hwdep,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_seq_device
pcspkr 1207 0
videobuf_core 10476 1 videobuf_dma_sg
btcx_risc 2499 0
button 3598 1 nouveau
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
i2c_nforce2 4464 0
asus_atk0110 6770 0
i2c_core 12787 8
tveeprom,nouveau,v4l2_common,drm_kms_helper,videodev,drm,i2c_algo_bit,i2c_nforce2
evdev 5609 9
soundcore 3450 1 snd
serio_raw 2916 0
processor 26327 0
ext3 94396 4
jbd 32401 1 ext3
mbcache 3762 1 ext3
sg 19937 0
sr_mod 10770 0
sd_mod 26013 7
cdrom 26435 1 sr_mod
crc_t10dif 1012 1 sd_mod
usb_storage 31033 1
ata_generic 2247 0
ohci_hcd 16999 0
fan 2586 0
firewire_ohci 16725 0
firewire_core 31243 2 firewire_sbp2,firewire_ohci
pata_amd 6625 4
sata_nv 15398 0
floppy 40923 0
thermal 9206 0
crc_itu_t 1035 1 firewire_core
thermal_sys 9378 3 processor,fan,thermal
ehci_hcd 28689 0
forcedeth 40785 0
libata 115869 3 ata_generic,pata_amd,sata_nv
scsi_mod 105001 6
firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,libata
usbcore 99321 7
snd_usb_audio,snd_usb_lib,usbhid,usb_storage,ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0
[10de:02fa] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1
[10de:02fe] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5
[10de:02f8] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4
[10de:02f9] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3
[10de:027f] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2
[10de:027e] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce
6150] [10de:0240] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM [1043:81cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270]
(rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0
[10de:0272] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026d] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026e] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269]
(rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:816a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fbff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
01:09.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Avermedia Technologies Inc Device [1461:001b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
** USB devices:
Bus 002 Device 014: ID 046d:0a12 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1058:1100 Western Digital Technologies, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
ii libc6-i686 2.11.3-3 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--
,
Prof. dr hab. Janusz S. Bien - Uniwersytet Warszawski (Katedra Lingwistyki
Formalnej)
Prof. Janusz S. Bien - University of Warsaw (Formal Linguistics Department)
jsb...@uw.edu.pl, jsb...@mimuw.edu.pl, http://fleksem.klf.uw.edu.pl/~jsbien/
