Package: linux-2.6 Version: 3.2.18-1 Severity: important Tags: upstream With kernel 3.2.xx you will no longer be able to mount a subfolder of a Windows 2003 Server share if you don't have access right to the share itself (of course the user must have access right to the subfolder).
This is also a problem when using some NAS Devices, which give a user only access rights to a subfolder of a share. The reason of this is known upstream (see the 8 th reply to http://samba.2283325.n4.nabble.com/Trouble-with-mount-cifs-while-smbclient-works-Ubuntu-12-04-tp4631671p4631800.html) but doesn't seems to be easily fixable. This renders debian in some cases unusable as Windows Client (mounting as Domain administrator always works ;-) Reverting back to kernel 2.6.xx fixes the problem! -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.18-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Mon May 21 18:24:12 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=7d0b322d-6e57-4fa5-ac58-ac008dae8ffd ro quiet ** Not tainted ** Kernel log: [ 10.159150] usbcore: registered new interface driver usbhid [ 10.159151] usbhid: USB HID core driver [ 11.560703] Adding 3211260k swap on /dev/sda5. Priority:-1 extents:1 across:3211260k [ 11.795451] EXT3-fs (sda1): using internal journal [ 11.912794] loop: module loaded [ 12.823892] Ebtables v2.0 registered [ 13.317416] 8021q: 802.1Q VLAN Support v1.8 [ 13.681997] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 13.736043] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 13.736236] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.862058] Bridge firewalling registered [ 13.879417] device vlan1 entered promiscuous mode [ 13.880049] device eth0 entered promiscuous mode [ 13.880233] ADDRCONF(NETDEV_UP): vlan1: link is not ready [ 13.882638] device vlan100 entered promiscuous mode [ 13.883291] ADDRCONF(NETDEV_UP): vlan100: link is not ready [ 13.885681] device vlan102 entered promiscuous mode [ 13.886331] ADDRCONF(NETDEV_UP): vlan102: link is not ready [ 13.887056] ADDRCONF(NETDEV_UP): br0: link is not ready [ 15.124853] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 15.124857] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 15.124980] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.125147] ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready [ 15.125174] br0: port 1(vlan1) entering forwarding state [ 15.125177] br0: port 1(vlan1) entering forwarding state [ 15.125285] ADDRCONF(NETDEV_CHANGE): vlan100: link becomes ready [ 15.125311] br0: port 2(vlan100) entering forwarding state [ 15.125313] br0: port 2(vlan100) entering forwarding state [ 15.125421] ADDRCONF(NETDEV_CHANGE): vlan102: link becomes ready [ 15.125446] br0: port 3(vlan102) entering forwarding state [ 15.125449] br0: port 3(vlan102) entering forwarding state [ 15.125557] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 23.712963] RPC: Registered named UNIX socket transport module. [ 23.712965] RPC: Registered udp transport module. [ 23.712966] RPC: Registered tcp transport module. [ 23.712967] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 23.890762] FS-Cache: Loaded [ 23.968392] FS-Cache: Netfs 'nfs' registered for caching [ 24.010018] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 24.924817] fuse init (API version 7.17) [ 25.472005] br0: no IPv6 routers present [ 25.544005] eth0: no IPv6 routers present [ 29.484517] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7 [ 30.176010] br0: port 1(vlan1) entering forwarding state [ 30.176021] br0: port 2(vlan100) entering forwarding state [ 30.176026] br0: port 3(vlan102) entering forwarding state [ 37.253840] Bluetooth: Core ver 2.16 [ 37.253853] NET: Registered protocol family 31 [ 37.253855] Bluetooth: HCI device and connection manager initialized [ 37.253857] Bluetooth: HCI socket layer initialized [ 37.253858] Bluetooth: L2CAP socket layer initialized [ 37.253864] Bluetooth: SCO socket layer initialized [ 37.346634] Bluetooth: RFCOMM TTY layer initialized [ 37.346637] Bluetooth: RFCOMM socket layer initialized [ 37.346638] Bluetooth: RFCOMM ver 1.11 [ 37.459494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 37.459496] Bluetooth: BNEP filters: protocol multicast [ 39.985509] lp0: using parport0 (interrupt-driven). [ 40.012031] ppdev: user-space parallel port driver [ 516.988870] FS-Cache: Netfs 'cifs' registered for caching [ 517.082845] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [ 517.109674] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 517.109678] CIFS VFS: Send error in SessSetup = -13 [ 517.111262] CIFS VFS: cifs_mount failed w/return code = -13 [ 517.164819] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 517.164823] CIFS VFS: Send error in SessSetup = -13 [ 517.166757] CIFS VFS: cifs_mount failed w/return code = -13 [ 517.230551] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 517.230556] CIFS VFS: Send error in SessSetup = -13 [ 517.232750] CIFS VFS: cifs_mount failed w/return code = -13 [ 583.785548] CIFS VFS: cifs_read_super: get root inode failed [ 583.827583] CIFS VFS: cifs_read_super: get root inode failed [ 583.884606] CIFS VFS: cifs_read_super: get root inode failed [ 606.332342] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 606.332348] CIFS VFS: Send error in SessSetup = -13 [ 606.332390] CIFS VFS: cifs_mount failed w/return code = -13 [ 606.336139] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 606.336143] CIFS VFS: Send error in SessSetup = -13 [ 606.336182] CIFS VFS: cifs_mount failed w/return code = -13 [ 606.339513] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 606.339517] CIFS VFS: Send error in SessSetup = -13 [ 606.339554] CIFS VFS: cifs_mount failed w/return code = -13 [ 670.816840] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 670.816846] CIFS VFS: Send error in SessSetup = -13 [ 670.816885] CIFS VFS: cifs_mount failed w/return code = -13 [ 670.820858] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 670.820862] CIFS VFS: Send error in SessSetup = -13 [ 670.820900] CIFS VFS: cifs_mount failed w/return code = -13 [ 670.824399] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 670.824403] CIFS VFS: Send error in SessSetup = -13 [ 670.824438] CIFS VFS: cifs_mount failed w/return code = -13 [ 1086.236787] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 1086.236791] CIFS VFS: Send error in SessSetup = -13 [ 1086.236828] CIFS VFS: cifs_mount failed w/return code = -13 [ 1086.241304] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 1086.241308] CIFS VFS: Send error in SessSetup = -13 [ 1086.241338] CIFS VFS: cifs_mount failed w/return code = -13 [ 1086.246511] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 1086.246515] CIFS VFS: Send error in SessSetup = -13 [ 1086.246546] CIFS VFS: cifs_mount failed w/return code = -13 ** Model information not available ** Loaded modules: mperf cpufreq_conservative cpufreq_powersave cpufreq_userspace cpufreq_stats des_generic ecb md4 hmac nls_utf8 cifs ppdev lp bnep rfcomm bluetooth rfkill crc16 binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge 8021q garp stp ebtable_filter ebtables x_tables coretemp loop joydev usbhid hid snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq sr_mod cdrom i915 video drm_kms_helper drm i2c_i801 i2c_algo_bit snd_seq_device snd_timer uhci_hcd i2c_core snd ehci_hcd usbcore soundcore iTCO_wdt iTCO_vendor_support processor button e1000e parport_pc parport usb_common psmouse evdev pcspkr dcdbas thermal_sys serio_raw ext3 mbcache jbd sd_mod crc_t10dif ata_generic ata_piix libata scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo br0 br0:0 iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet manual iface vlan1 inet manual pre-up ifup eth0 vlan-raw-device eth0 iface vlan100 inet manual vlan-raw-device eth0 iface vlan102 inet manual vlan-raw-device eth0 iface br0 inet dhcp pre-up ifup vlan1 vlan100 vlan102 bridge_ports vlan1 vlan100 vlan102 # pre-up ifup vlan1 vlan100 # bridge_ports vlan1 vlan100 post-up /usr/sbin/arp -s 10.x.x.x 00:xx:xx:xx:xx:3f # address 10.x.x.x # netmask 255.255.0.0 # gateway 10.x.x.x # dns-nameservers 10.x.x.xxx # dns-search abc.de iface br0:0 inet static address 10.x.x.x netmask 255.255.0.0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff inet6 fe80::221:70ff:xxxx:xxxx/64 scope link valid_lft forever preferred_lft forever 3: vlan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff 4: vlan100@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff 5: vlan102@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP link/ether 00:xx:xx:xx:xx:xx rd ff:ff:ff:ff:ff:ff 6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff inet 10.x.x.x/16 brd 10.1.255.255 scope global br0 inet 10.x.x.x/16 brd 10.2.255.255 scope global br0:0 inet6 fe80::221:70ff:fe27:afab/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed vlan1: 37221 407 0 0 0 0 0 362 20416 192 0 0 0 0 0 0 lo: 206796 375 0 0 0 0 0 0 206796 375 0 0 0 0 0 0 br0: 140471580 66246 0 0 0 0 0 0 8100833 64427 0 0 0 0 0 0 vlan100: 140112008 63791 0 0 0 0 0 88 8090524 64270 0 0 0 0 0 0 eth0: 145480708 113212 0 58 0 0 0 1493 8669250 64859 0 0 0 0 0 0 vlan102: 407043 2151 0 0 0 0 0 121 29173 317 0 0 0 0 0 0 *** Protocol statistics: Ip: 63863 total packets received 345 with invalid addresses 0 forwarded 0 incoming packets discarded 63470 incoming packets delivered 64707 requests sent out 4 dropped because of missing route Icmp: 12 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 12 12 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 12 IcmpMsg: InType3: 12 OutType3: 12 Tcp: 76 active connections openings 19 passive connection openings 2 failed connection attempts 2 connection resets received 4 connections established 62899 segments received 64406 segments send out 5 segments retransmited 0 bad segments received. 5 resets sent Udp: 601 packets received 0 packets to unknown port received. 0 packet receive errors 307 packets sent UdpLite: TcpExt: 40 TCP sockets finished time wait in fast timer 1013 delayed acks sent Quick ack mode was activated 8 times 57510 packets directly queued to recvmsg prequeue. 253326 bytes directly in process context from backlog 123520292 bytes directly received in process context from prequeue 1336 packet headers predicted 42480 packets header predicted and directly queued to user 350 acknowledgments not containing data payload received 399 predicted acknowledgments 1 other TCP timeouts 8 DSACKs sent for old packets IpExt: InMcastPkts: 69 OutMcastPkts: 53 InBcastPkts: 286 OutBcastPkts: 54 InOctets: 140525086 OutOctets: 7397716 InMcastOctets: 5857 OutMcastOctets: 5345 InBcastOctets: 46080 OutBcastOctets: 4792 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82Q35 Express DRAM Controller [8086:29b0] (rev 02) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82Q35 Express PCI Express Root Port [8086:29b1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q35 Express Integrated Graphics Controller [8086:29b2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec90 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at feb00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 82Q35 Express Integrated Graphics Controller [8086:29b3] (rev 02) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:03.0 Communication controller [0780]: Intel Corporation 82Q35 Express MEI Controller [8086:29b4] (rev 02) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:03.2 IDE interface [0101]: Intel Corporation 82Q35 Express PT IDER Controller [8086:29b6] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at fe80 [size=8] Region 1: I/O ports at fe90 [size=4] Region 2: I/O ports at fea0 [size=8] Region 3: I/O ports at feb0 [size=4] Region 4: I/O ports at fef0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_generic 00:03.3 Serial controller [0700]: Intel Corporation 82Q35 Express Serial KT Controller [8086:29b7] (rev 02) (prog-if 02 [16550]) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ec98 [size=8] Region 1: Memory at fe9da000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02) Subsystem: Dell OptiPlex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fe9db000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at ecc0 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff20 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fe9d9c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fe9dc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at ff80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller [8086:2914] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fec0 [size=16] Region 5: I/O ports at eca0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe9d9b00 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at ece0 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Dell Optiplex 755 [1028:0211] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at fe40 [size=8] Region 1: I/O ports at fe50 [size=4] Region 2: I/O ports at fe60 [size=8] Region 3: I/O ports at fe70 [size=4] Region 4: I/O ports at fed0 [size=16] Region 5: I/O ports at ecb0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 003 Device 004: ID 413c:2010 Dell Computer Corp. Keyboard -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.43 ii initramfs-tools [linux-initramfs-tool] 0.102 ii kmod 8-2 ii linux-base 3.5 ii module-init-tools 8-2 Versions of packages linux-image-3.2.0-2-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-33 Versions of packages linux-image-3.2.0-2-686-pae suggests: ii grub-pc 1.99-21 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.35 ii firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae: -- <html><head> <title>DEREFER</title> <META HTTP-EQUIV="REFRESH" CONTENT="0; URL=http://www.gmx.net/?status=hinweis";> </head> <body bgcolor="#ffffff" link="#666666" vlink="#666666"> <table width="100%" height="100%" border="0"><tr><td align="center"><a href="http://www.gmx.net/?status=hinweis";><font face="Arial, Helvetica, sans-serif" size="2" color="#666666">Einen Moment bitte, die angeforderte Seite wird geladen...</font></a></td></tr></table> </body></html> NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120627130422.148...@gmx.net
