Package: linux-2.6
Version: 2.6.32-45
Severity: important
The previous night during the periodic mdadm RAID check:
- the linux kernel gave a kernel BUG,
- tried to kick out a failed disk and
- stopped accepting I/O to the affected raid.
The affected programs were in state D. The only way to recover was to
do a reboot. After reboot the problematic disk was replaced.
This machine have 2 x RAID6 with 6 disks each, for a total of 12 disks.
The proprietary module is the openafs filesystem v1.6.1 backported
from testing.
The kernel bug is:
build/source_i386_none/drivers/md/raid5.c:2764!
Jun 3 01:35:56 afs04 kernel: invalid opcode: 0000 [#1] SMP
Jun 3 01:35:56 afs04 kernel: last sysfs file:
/sys/devices/pci0000:00/0000:00:1c.0/0000:02:01.0/cciss0/c0d0/block/cciss!c0d0/removable
Jun 3 01:35:56 afs04 kernel: Modules linked in: btrfs zlib_deflate crc32c
libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs reiserfs ext4 jbd2
crc16 openafs(P) lp parport_pc parport joydev st sd_mod crc_t10dif ext2 loop
tun xt_multiport xfs exportfs 8021q garp stp ip6table_filter ip6_tables
iptable_filter ip_tables x_tables ide_generic ide_gd_mod ide_cd_mod ide_core
snd_pcm snd_timer hpilo snd soundcore snd_page_alloc hpwdt e752x_edac shpchp
rng_core i6300esb edac_core pci_hotplug pcspkr container processor evdev button
psmouse serio_raw ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov
async_pq usbhid hid raid6_pq async_xor xor async_memcpy async_tx sg sr_mod
cdrom ata_generic thermal uhci_hcd cciss tg3 floppy ata_piix ehci_hcd libata
e1000 usbcore libphy scsi_mod nls_base thermal_sys [last unloaded: openafs]
Jun 3 01:35:56 afs04 kernel:
Jun 3 01:35:56 afs04 kernel: Pid: 743, comm: md2_raid6 Tainted: P
(2.6.32-5-686 #1) ProLiant DL360 G4
Jun 3 01:35:56 afs04 kernel: EIP: 0060:[<f818c811>] EFLAGS: 00010297 CPU: 3
Jun 3 01:35:56 afs04 kernel: EIP is at handle_stripe+0x89d/0x173e [raid456]
Jun 3 01:35:56 afs04 kernel: EAX: 00000005 EBX: 00000002 ECX: 00000003 EDX:
00000001
Jun 3 01:35:56 afs04 kernel: ESI: f6394000 EDI: 00000003 EBP: f6394028 ESP:
f58d5e6c
Jun 3 01:35:56 afs04 kernel: DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Jun 3 01:35:56 afs04 kernel: Process md2_raid6 (pid: 743, ti=f58d4000
task=f6569980 task.ti=f58d4000)
Jun 3 01:35:56 afs04 kernel: Stack:
Jun 3 01:35:56 afs04 kernel: e6fde3e6 c2988138 00000006 f61c8e00 00000006
0002d995 00020003 00000000
Jun 3 01:35:56 afs04 kernel: <0> c2988138 f4cbc86c f65699ac 000f0e67 00000000
f639431c 00000005 fffffffc
Jun 3 01:35:56 afs04 kernel: <0> f4cbc86c c1025461 00000000 00000000 00000002
00000005 00988100 c127a45c
Jun 3 01:35:56 afs04 kernel: Call Trace:
Jun 3 01:35:56 afs04 kernel: [<c1025461>] ? check_preempt_wakeup+0x196/0x202
Jun 3 01:35:56 afs04 kernel: [<f818d9fb>] ? raid5d+0x349/0x389 [raid456]
Jun 3 01:35:56 afs04 kernel: [<c103b623>] ? del_timer_sync+0xa/0x14
Jun 3 01:35:56 afs04 kernel: [<c103b6cb>] ? process_timeout+0x0/0x5
Jun 3 01:35:56 afs04 kernel: [<f816206e>] ? md_thread+0xe1/0xf8 [md_mod]
Jun 3 01:35:56 afs04 kernel: [<c104433a>] ? autoremove_wake_function+0x0/0x2d
Jun 3 01:35:56 afs04 kernel: [<f8161f8d>] ? md_thread+0x0/0xf8 [md_mod]
Jun 3 01:35:56 afs04 kernel: [<c1044108>] ? kthread+0x61/0x66
Jun 3 01:35:56 afs04 kernel: [<c10440a7>] ? kthread+0x0/0x66
Jun 3 01:35:56 afs04 kernel: [<c1003d47>] ? kernel_thread_helper+0x7/0x10
Jun 3 01:35:56 afs04 kernel: Code: e9 9b 01 00 00 83 7c 24 7c 02 74 04 0f 0b
eb fe f6 46 28 10 c7 46 3c 00 00 00 00 0f 85 7f 01 00 00 8b 44 24 38 39 44 24
70 7d 04 <0f> 0b eb fe 83 7c 24 7c 02 75 20 6b 84 24 a8 00 00 00 78 ff 44
Jun 3 01:35:56 afs04 kernel: EIP: [<f818c811>] handle_stripe+0x89d/0x173e
[raid456] SS:ESP 0068:f58d5e6c
Jun 3 01:35:56 afs04 kernel: ---[ end trace b6f4aa295d5e4948 ]---
Jun 3 01:35:56 afs04 mdadm[2376]: Fail event detected on md device /dev/md2,
component device /dev/cciss/c1d3p1
Jose Calhariz
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-45) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=7785f1ca-c890-4fef-9e27-58920be9d83b ro printk.time=n quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
Buffer I/O error on device cciss/c1d3, logical block 0
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 488326912
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 488327024
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 8
cciss: cmd f60083d0 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
lp: driver loaded but no devices found
st: Version 20081215, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
Buffer I/O error on device cciss/c1d3, logical block 0
Buffer I/O error on device cciss/c1d3, logical block 1
Buffer I/O error on device cciss/c1d3, logical block 2
Buffer I/O error on device cciss/c1d3, logical block 3
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
Buffer I/O error on device cciss/c1d3, logical block 0
lp: driver loaded but no devices found
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
Buffer I/O error on device cciss/c1d3, logical block 0
Buffer I/O error on device cciss/c1d3, logical block 1
Buffer I/O error on device cciss/c1d3, logical block 2
Buffer I/O error on device cciss/c1d3, logical block 3
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
Buffer I/O error on device cciss/c1d3, logical block 0
cciss: cmd f60004a0 has CHECK CONDITION sense key = 0x4
cciss: cmd f6000250 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 496
Buffer I/O error on device cciss/c1d3, logical block 62
Buffer I/O error on device cciss/c1d3, logical block 63
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 248
Buffer I/O error on device cciss/c1d3, logical block 31
Buffer I/O error on device cciss/c1d3, logical block 32
Buffer I/O error on device cciss/c1d3, logical block 33
Buffer I/O error on device cciss/c1d3, logical block 34
Buffer I/O error on device cciss/c1d3, logical block 35
Buffer I/O error on device cciss/c1d3, logical block 36
Buffer I/O error on device cciss/c1d3, logical block 37
Buffer I/O error on device cciss/c1d3, logical block 38
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss: cmd f6000000 has CHECK CONDITION sense key = 0x4
end_request: I/O error, dev cciss/c1d3, sector 0
cciss/c1d3: p1
md: bind<cciss!c1d3p1>
RAID5 conf printout:
--- rd:6 wd:5
disk 0, o:1, dev:cciss/c1d0p1
disk 1, o:1, dev:cciss/c1d1p1
disk 2, o:1, dev:cciss/c1d2p1
disk 3, o:1, dev:cciss/c1d3p1
disk 4, o:1, dev:cciss/c1d4p1
disk 5, o:1, dev:cciss/c1d5p1
md: recovery of RAID array md2
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec)
for recovery.
md: using 128k window, over a total of 244162304 blocks.
** Model information
not available
** Loaded modules:
Module Size Used by
lp 5570 0
parport_pc 15799 0
parport 22554 2 lp,parport_pc
joydev 6739 0
st 26908 0
sd_mod 26013 0
crc_t10dif 1012 1 sd_mod
openafs 532834 2
xt_multiport 1775 1
ext2 46245 1
loop 9769 2
xfs 415733 2
exportfs 2618 1 xfs
8021q 14086 0
garp 4134 1 8021q
stp 996 1 garp
ip6table_filter 1908 0
ip6_tables 8572 1 ip6table_filter
iptable_filter 1790 1
ip_tables 7706 1 iptable_filter
x_tables 8327 3 xt_multiport,ip6_tables,ip_tables
ide_generic 801 0 [permanent]
ide_gd_mod 17163 0
ide_cd_mod 21080 0
ide_core 59614 3 ide_generic,ide_gd_mod,ide_cd_mod
snd_pcm 47222 0
snd_timer 12270 1 snd_pcm
snd 34415 2 snd_pcm,snd_timer
soundcore 3450 1 snd
snd_page_alloc 5045 1 snd_pcm
psmouse 44837 0
e752x_edac 8053 0
hpwdt 4331 0
container 1833 0
pcspkr 1207 0
evdev 5609 2
hpilo 5252 0
serio_raw 2916 0
edac_core 23121 1 e752x_edac
rng_core 2178 0
shpchp 21200 0
i6300esb 3311 0
button 3598 0
pci_hotplug 18545 1 shpchp
processor 26327 0
ext3 94396 5
jbd 32401 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 46326 15
raid456 42900 2
md_mod 67429 3 raid456
async_raid6_recov 4130 1 raid456
async_pq 2643 2 raid456,async_raid6_recov
raid6_pq 77468 2 async_raid6_recov,async_pq
async_xor 1954 3 raid456,async_raid6_recov,async_pq
xor 12418 1 async_xor
async_memcpy 838 2 raid456,async_raid6_recov
async_tx 1326 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
sg 19937 0
sr_mod 10770 0
cdrom 26435 2 ide_cd_mod,sr_mod
ata_generic 2247 0
ata_piix 17736 0
libata 115869 2 ata_generic,ata_piix
uhci_hcd 16057 0
cciss 76751 28
floppy 40923 0
e1000 77317 0
tg3 95865 0
ehci_hcd 28689 0
libphy 11638 1 tg3
scsi_mod 105001 6 st,sd_mod,sg,sr_mod,libata,cciss
usbcore 99321 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9206 0
thermal_sys 9378 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub
[8086:3590] (rev 0a)
Subsystem: Compaq Computer Corporation Device [0e11:3200]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [40] Vendor Specific Information: Len=05 <?>
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port
A [8086:3595] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4161
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B
[8086:3597] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=0c, sec-latency=0
I/O behind bridge: 00005000-00006fff
Memory behind bridge: fde00000-fdffffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4169
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C
[8086:3599] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable+ Count=1/2 Maskable- 64bit-
Address: fee0f00c Data: 4171
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge
[8086:25ae] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 0000000080200000-00000000802fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] PCI-X bridge device
Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=66MHz
Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=0
Downstream: Capacity=65535 CommitmentLimit=0
00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host
Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host
Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer
[8086:25ab] (rev 02)
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=16]
00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable
Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [50] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=00:1d.5 64bit+ 133MHz- SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:1d.7 USB Controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host
Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00002fff
Memory behind bridge: fbf00000-fcffffff
Prefetchable memory behind bridge: 80300000-803fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller
[8086:25a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller
[8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0500 [size=16]
Region 5: Memory at 80400000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
01:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 80300000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights
Out Controller [0e11:b203] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512]
Capabilities: [f0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights
Out Processor [0e11:b204] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K]
Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at 80320000 [disabled] [size=64K]
Capabilities: [f0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: hpilo
02:01.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array
64xx [0e11:0046] (rev 01)
Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 4000 [size=256]
Region 3: Memory at fdd80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 80200000 [disabled] [size=256K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [dc] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=8
Status: Dev=02:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] Vital Product Data
Not readable
Kernel driver in use: cciss
02:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter
(PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fdd70000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=02:02.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: HP NC7782 Gigabit Server Adapter
Read-only fields:
[PN] Part number: 349321-001
[EC] Engineering changes: N/A
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 46 byte(s) reserved
Read/write fields:
[YA] Asset tag: N/A
[RW] Read-write area: 115 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 926063e161127598 Data: 4170
Kernel driver in use: tg3
02:02.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter
(PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fdd60000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=02:02.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: HP NC7782 Gigabit Server Adapter
Read-only fields:
[PN] Part number: 349321-001
[EC] Engineering changes: N/A
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 46 byte(s) reserved
Read/write fields:
[YA] Asset tag: N/A
[RW] Read-write area: 115 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: de30a0ce2293b4e8 Data: 5211
Kernel driver in use: tg3
06:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=09, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
06:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=0a, subordinate=0c, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000080100000-00000000801fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=06:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
07:01.0 Ethernet controller [0200]: Intel Corporation 82545GM Gigabit Ethernet
Controller [8086:1026] (rev 04)
Subsystem: Intel Corporation PRO/1000 MT Server Adapter [8086:1001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fdee0000 (64-bit, non-prefetchable) [size=128K]
Region 2: Memory at fde80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at 5000 [size=64]
[virtual] Expansion ROM at 80000000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=07:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
0a:01.0 PCI bridge [0604]: IBM PCI-X to PCI-X Bridge [1014:01a7] (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=64
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000080100000-00000000801fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0a:01.0 64bit+ 133MHz+ SCD- USC- SCO+ SRD-
Upstream: Capacity=32 CommitmentLimit=32
Downstream: Capacity=32 CommitmentLimit=32
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
0b:04.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array
64xx [0e11:0046] (rev 01)
Subsystem: Compaq Computer Corporation Smart Array 6400 [0e11:409c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 6000 [size=256]
Region 3: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 80100000 [disabled] [size=256K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [dc] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=8
Status: Dev=0b:04.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] Vital Product Data
Not readable
Kernel driver in use: cciss
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=pt_PT@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
ii libc6-i686 2.11.3-3 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
* linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120604160111.27574.49662.report...@afs04.ist.utl.pt
