Package: linux-2.6
Version: 3.2.17-1
Severity: important
Tags: upstream
The ipw2100 module fails to report signal strength.
With a Intel 2100 3B mini card this makes it impossible to use standard tools
for wireless. As a matter of fact roaming decisions and many others of standard
software are based on these values.
To illustrate what I am talking about. The command
#iwlist eth1 scan
outputs:
eth1 Scan completed :
Cell 01 - Address: 02:18:F8:7A:4E:5E
ESSID:"eduroam"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:64 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : 802.1x
Extra: Last beacon: 248ms ago
Cell 02 - Address: 02:18:39:D4:13:B3
ESSID:"eduroam"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality:35 Signal level:0 Noise level:0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : 802.1x
Extra: Last beacon: 252ms ago
Look at the field labeled "signal level"
I do not know how related is the line that sometimes appears in syslog:
wpa_supplicant[1826]: bgscan simple: Failed to enable signal strength
monitoring
Should I file the bug somewhere else?
Signal strength monitoring on other wifi cards like usb ones works
flawlessly...
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.17-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP
Sun May 13 07:51:23 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae
root=UUID=5a0ffa6d-f75b-430d-af8d-a77bfe7214e8 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 7.603608] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: clean.
[ 7.603652] pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff: clean.
[ 7.603695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 7.604118] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 7.605167] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 7.605614] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 7.605989] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 7.606403] pcmcia_socket pcmcia_socket1: cs: memory probe
0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 7.606446] pcmcia_socket pcmcia_socket1: cs: memory probe
0xa0000000-0xa0ffffff: clean.
[ 7.606489] pcmcia_socket pcmcia_socket1: cs: memory probe
0x60000000-0x60ffffff: clean.
[ 7.606532] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 7.607649] clean.
[ 7.649423] lib80211: common routines for IEEE802.11 drivers
[ 7.649428] lib80211_crypt: registered algorithm 'NULL'
[ 7.818737] libipw: 802.11 data/management/control stack, git-1.1.13
[ 7.818742] libipw: Copyright (C) 2004-2005 Intel Corporation
<jketr...@linux.intel.com>
[ 7.906101] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 7.906126] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[ 7.958170] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 7.958206] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 7.967983] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 7.967987] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 7.968149] ipw2100 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level,
low) -> IRQ 11
[ 7.968982] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 8.380944] cfg80211: failed to add phy80211 symlink to netdev!
[ 8.884045] intel8x0_measure_ac97_clock: measured 55399 usecs (2669 samples)
[ 8.884050] intel8x0: clocking to 48000
[ 9.030209] cfg80211: World regulatory domain updated:
[ 9.030215] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 9.030220] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.030224] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 9.030229] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 9.030258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.030262] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 10.906586] Adding 984060k swap on /dev/sda2. Priority:-1 extents:1
across:984060k
[ 10.923348] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.147944] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.300719] loop: module loaded
[ 13.251250] RPC: Registered named UNIX socket transport module.
[ 13.251255] RPC: Registered udp transport module.
[ 13.251258] RPC: Registered tcp transport module.
[ 13.251261] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.313015] FS-Cache: Loaded
[ 13.389470] FS-Cache: Netfs 'nfs' registered for caching
[ 13.419168] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 13.436030] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.670493] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input7
[ 14.108561] fuse init (API version 7.17)
[ 18.862762] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.867413] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.158059] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.366290] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 20.214899] Bluetooth: Core ver 2.16
[ 20.214929] NET: Registered protocol family 31
[ 20.214932] Bluetooth: HCI device and connection manager initialized
[ 20.214936] Bluetooth: HCI socket layer initialized
[ 20.214939] Bluetooth: L2CAP socket layer initialized
[ 20.215183] Bluetooth: SCO socket layer initialized
[ 20.256509] Bluetooth: RFCOMM TTY layer initialized
[ 20.256516] Bluetooth: RFCOMM socket layer initialized
[ 20.256519] Bluetooth: RFCOMM ver 1.11
[ 20.368929] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.368933] Bluetooth: BNEP filters: protocol multicast
[ 20.788900] lp0: using parport0 (interrupt-driven).
[ 20.880355] ppdev: user-space parallel port driver
[ 21.372322] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.522870] lib80211_crypt: registered algorithm 'TKIP'
[ 23.279925] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 23.289113] hdaps: initial mode latch is 0x01
[ 23.289254] hdaps: setting ec_rate=250, filter_order=2
[ 23.289471] hdaps: device successfully initialized.
[ 23.290333] input: ThinkPad HDAPS joystick emulation as
/devices/virtual/input/input9
[ 23.291525] input: ThinkPad HDAPS accelerometer data as
/devices/virtual/input/input10
[ 23.291789] hdaps: driver successfully loaded.
[ 34.997488] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 34.997498] watchdog: failed to be enabled on some cpus
[ 35.036919] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 35.039972] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 35.041114] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 35.041177] ehci_hcd 0000:00:1d.7: PME# enabled
[ 35.056073] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 35.366429] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 35.380064] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xc0000000-0xc00003ff]
(PCI address [0xc0000000-0xc00003ff])
[ 35.380086] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 35.380113] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x400, writing 0x40b)
[ 35.380151] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900102)
[ 35.380209] ehci_hcd 0000:00:1d.7: PME# disabled
[ 35.380224] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 35.380238] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 35.380261] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level,
low) -> IRQ 11
[ 35.380278] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 35.411060] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 35.411075] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 35.412399] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 35.412413] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 35.412434] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,
low) -> IRQ 11
[ 35.412451] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 93.559801] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 1392.840106] ipw2100: exit - failed to send CARD_DISABLE command
[ 1608.633133] ipw2100: Fatal interrupt. Scheduling firmware restart.
** Model information
not available
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
hdaps(O)
thinkpad_ec(O)
michael_mic
arc4
ecb
lib80211_crypt_tkip
ppdev
lp
bnep
rfcomm
bluetooth
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
ipw2100
snd_intel8x0
snd_intel8x0m
snd_ac97_codec
snd_pcm
libipw
snd_page_alloc
lib80211
joydev
thinkpad_acpi
nvram
snd_seq
snd_seq_device
snd_timer
snd
soundcore
cfg80211
pcmcia
nsc_ircc
irda
parport_pc
radeon
crc_ccitt
yenta_socket
ac
iTCO_wdt
rfkill
iTCO_vendor_support
ttm
pcmcia_rsrc
drm_kms_helper
psmouse
ac97_bus
pcmcia_core
parport
rng_core
drm
i2c_algo_bit
i2c_i801
battery
evdev
serio_raw
power_supply
i2c_core
shpchp
video
processor
button
ext4
crc16
jbd2
mbcache
sr_mod
sd_mod
crc_t10dif
cdrom
ata_generic
ata_piix
libata
uhci_hcd
thermal
ehci_hcd
scsi_mod
thermal_sys
usbcore
e1000
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O
Controller [8086:3340] (rev 03)
Subsystem: IBM Thinkpad T40 series [1014:0529]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP
Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM ThinkPad [1014:052e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00004000-00008fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 01)
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: IBM ThinkPad T41 [1014:0537]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: IBM ThinkPad [1014:0525]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RV200 [Mobility Radeon 7500] [1002:4c57] (prog-if 00 [VGA controller])
Subsystem: IBM ThinkPad T42 2373-4WU [1014:0530]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus
Controller [104c:ac46] (rev 01)
Subsystem: IBM ThinkPad [1014:0552]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: cc000000-cfffffff (prefetchable)
Memory window 1: c8000000-cbffffff
I/O window 0: 00004c00-00004cff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus
Controller [104c:ac46] (rev 01)
Subsystem: IBM ThinkPad [1014:0552]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
Memory window 0: ec000000-efffffff (prefetchable)
Memory window 1: c4000000-c7ffffff
I/O window 0: 00004400-000044ff
I/O window 1: 00004000-000040ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet
Controller (Mobile) [8086:101e] (rev 03)
Subsystem: IBM Thinkpad [1014:0549]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at 8000 [size=64]
[virtual] Expansion ROM at e8000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: e1000
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation Device [8086:2551]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0210000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 8-1
ii linux-base 3.5
ii module-init-tools 8-1
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-32
Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii grub-pc 1.99-21
ii linux-doc-3.2 3.2.17-1
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 0.35
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120520204153.15102.40326.report...@halen.sns.it
