Package: linux-2.6
Version: 3.2.17-1
Severity: normal
Samsung X125 laptop. This kind of warning was logged. Also earlier 3.2.x
kernels do this.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.17-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP
Sun May 13 07:51:23 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae
root=UUID=8d1825b0-128e-48b9-b21d-c189ccdf9506 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 4.561024] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.568751] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 4.574151] radeon 0000:01:05.0: WB enabled
[ 4.611273] [drm] ring test succeeded in 0 usecs
[ 4.611412] [drm] radeon: ib pool ready.
[ 4.611501] [drm] ib test succeeded in 0 usecs
[ 4.614899] [drm] Radeon Display Connectors
[ 4.614903] [drm] Connector 0:
[ 4.614905] [drm] LVDS
[ 4.614909] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 4.614911] [drm] Encoders:
[ 4.614913] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 4.614915] [drm] Connector 1:
[ 4.614917] [drm] VGA
[ 4.614920] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 4.614922] [drm] Encoders:
[ 4.614924] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.614926] [drm] Connector 2:
[ 4.614928] [drm] HDMI-A
[ 4.614929] [drm] HPD1
[ 4.614932] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c
0x7e6c
[ 4.614934] [drm] Encoders:
[ 4.614936] [drm] DFP1: INTERNAL_UNIPHY
[ 4.615068] [drm] radeon: power management initialized
[ 5.197346] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 5.239840] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input10
[ 5.650317] [drm] fb mappable at 0xC0142000
[ 5.650321] [drm] vram apper at 0xC0000000
[ 5.650324] [drm] size 4325376
[ 5.650326] [drm] fb depth is 24
[ 5.650328] [drm] pitch is 5632
[ 5.650478] fbcon: radeondrmfb (fb0) is primary device
[ 5.731785] Console: switching to colour frame buffer device 170x48
[ 5.747596] fb0: radeondrmfb frame buffer device
[ 5.747599] drm: registered panic notifier
[ 5.747677] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on
minor 0
[ 5.952706] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 6.019072] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 6.069379] loop: module loaded
[ 6.830368] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[ 7.125166] fuse init (API version 7.17)
[ 8.057107] powernow-k8: Found 1 AMD Athlon(tm) II Neo K125 Processor (1 cpu
cores) (version 2.20.00)
[ 8.057155] powernow-k8: 0 : pstate 0 (1700 MHz)
[ 8.057158] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 8.057161] powernow-k8: 2 : pstate 2 (800 MHz)
[ 8.214473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.214482] Bluetooth: BNEP filters: protocol multicast
[ 8.243742] Bluetooth: RFCOMM TTY layer initialized
[ 8.243755] Bluetooth: RFCOMM socket layer initialized
[ 8.243761] Bluetooth: RFCOMM ver 1.11
[ 8.250949] Bridge firewalling registered
[ 9.518051] ieee80211 phy0: brcms_ops_config: change monitor mode: false
(implement)
[ 9.522516] ieee80211 phy0: brcms_ops_config: change power-save mode: false
(implement)
[ 9.527546] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 9.532333] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.538671] sky2 0000:03:00.0: eth0: enabling interface
[ 9.538958] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 410.536349] wlan0: authenticate with 00:24:a5:da:fa:e8 (try 1)
[ 410.540145] wlan0: authenticated
[ 410.540189] wlan0: associate with 00:24:a5:da:fa:e8 (try 1)
[ 410.543376] wlan0: RX AssocResp from 00:24:a5:da:fa:e8 (capab=0x411 status=0
aid=1)
[ 410.543382] wlan0: associated
[ 410.543990] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 410.544024] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 410.544031] ieee80211 phy0: changing basic rates failed: -22
[ 410.544036] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 0 (implement)
[ 410.544322] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 410.618222] Intel AES-NI instructions are not detected.
[ 414.731944] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering:
enabled true, count 1 (implement)
[ 420.912148] wlan0: no IPv6 routers present
[ 1210.372008] ------------[ cut here ]------------
[ 1210.372039] WARNING: at
/build/buildd-linux-2.6_3.2.17-1-i386-rPdRhH/linux-2.6-3.2.17/debian/build/source_i386_none/drivers/net/wireless/brcm80211/brcmsmac/main.c:8241
brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]()
[ 1210.372046] Hardware name: X125
[ 1210.372049] Modules linked in: cryptd aes_i586 aes_generic bridge stp rfcomm
bnep powernow_k8 mperf cpufreq_stats cpufreq_userspace cpufreq_conservative
cpufreq_powersave fuse loop joydev tpm_tis tpm tpm_bios arc4 radeon psmouse
brcmsmac serio_raw btusb mac80211 brcmutil pcspkr samsung_laptop evdev ttm
drm_kms_helper uvcvideo drm videodev sp5100_tco media ac processor
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm snd_seq snd_timer snd_seq_device i2c_algo_bit snd soundcore k10temp
video cfg80211 crc8 i2c_piix4 battery power_supply bluetooth button i2c_core
rfkill snd_page_alloc cordic shpchp ext4 mbcache jbd2 crc16 sd_mod crc_t10dif
usb_storage uas ohci_hcd ahci libahci ehci_hcd libata scsi_mod thermal
thermal_sys sky2 usbcore usb_common [last unloaded: scsi_wait_scan]
[ 1210.372139] Pid: 1659, comm: wpa_supplicant Not tainted 3.2.0-2-686-pae #1
[ 1210.372143] Call Trace:
[ 1210.372153] [<c103845c>] ? warn_slowpath_common+0x68/0x79
[ 1210.372172] [<f8706e1e>] ? brcms_c_wait_for_tx_completion+0x73/0x7d
[brcmsmac]
[ 1210.372178] [<c103847a>] ? warn_slowpath_null+0xd/0x10
[ 1210.372195] [<f8706e1e>] ? brcms_c_wait_for_tx_completion+0x73/0x7d
[brcmsmac]
[ 1210.372210] [<f86fe10f>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac]
[ 1210.372227] [<f86586e4>] ? __ieee80211_start_scan+0x164/0x1cb [mac80211]
[ 1210.372242] [<f8658e7d>] ? ieee80211_request_scan+0x22/0x3a [mac80211]
[ 1210.372258] [<f83e3cfc>] ? cfg80211_wext_siwscan+0x246/0x292 [cfg80211]
[ 1210.372266] [<c12a591f>] ? ioctl_standard_call+0x230/0x2d6
[ 1210.372280] [<f83e3ab6>] ? cfg80211_unlock_rdev+0x15/0x15 [cfg80211]
[ 1210.372287] [<c121da06>] ? dev_name_hash.isra.66+0x14/0x45
[ 1210.372291] [<c121da06>] ? dev_name_hash.isra.66+0x14/0x45
[ 1210.372297] [<c12a5a69>] ? wext_handle_ioctl+0xa4/0x17f
[ 1210.372310] [<f83e3ab6>] ? cfg80211_unlock_rdev+0x15/0x15 [cfg80211]
[ 1210.372316] [<c1220c3a>] ? dev_ioctl+0x555/0x58a
[ 1210.372323] [<c10f1c67>] ? fsnotify+0x1d1/0x1e8
[ 1210.372329] [<c10cb912>] ? fsnotify_modify+0x48/0x4f
[ 1210.372335] [<c1210ae9>] ? might_fault+0x5/0x5
[ 1210.372340] [<c10d795f>] ? do_vfs_ioctl+0x459/0x48f
[ 1210.372346] [<c100f9e7>] ? read_tsc+0xa/0x28
[ 1210.372353] [<c1053739>] ? timekeeping_get_ns+0x11/0x55
[ 1210.372358] [<c10d79d9>] ? sys_ioctl+0x44/0x67
[ 1210.372364] [<c12c565f>] ? sysenter_do_call+0x12/0x28
[ 1210.372368] ---[ end trace 0bc80ecc3c064a4f ]---
** Model information
not available
** Loaded modules:
cryptd
aes_i586
aes_generic
bridge
stp
rfcomm
bnep
powernow_k8
mperf
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
fuse
loop
joydev
tpm_tis
tpm
tpm_bios
arc4
radeon
psmouse
brcmsmac
serio_raw
btusb
mac80211
brcmutil
pcspkr
samsung_laptop
evdev
ttm
drm_kms_helper
uvcvideo
drm
videodev
sp5100_tco
media
ac
processor
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_seq
snd_timer
snd_seq_device
i2c_algo_bit
snd
soundcore
k10temp
video
cfg80211
crc8
i2c_piix4
battery
power_supply
bluetooth
button
i2c_core
rfkill
snd_page_alloc
cordic
shpchp
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
usb_storage
uas
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
thermal
thermal_sys
sky2
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:24:54:cc:53:99 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether e8:39:df:9e:43:d5 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.154/24 brd 192.168.100.255 scope global wlan0
inet6 fe80::ea39:dfff:fe9e:43d5/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether f2:eb:ac:ef:95:d4 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 174220 1456 0 0 0 0 0 0 174220
1456 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 25089559 20441 0 0 0 0 0 0 1173329
12426 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
20845 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
20034 incoming packets delivered
13209 requests sent out
80 outgoing packets dropped
Icmp:
91 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 88
echo replies: 3
91 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 88
echo request: 3
IcmpMsg:
InType0: 3
InType3: 88
OutType3: 88
OutType8: 3
Tcp:
253 active connections openings
89 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
18549 segments received
12201 segments send out
8 segments retransmited
0 bad segments received.
8 resets sent
Udp:
783 packets received
88 packets to unknown port received.
0 packet receive errors
907 packets sent
UdpLite:
TcpExt:
3 packets pruned from receive queue because of socket buffer overrun
95 TCP sockets finished time wait in fast timer
137 delayed acks sent
Quick ack mode was activated 1 times
1 packets directly queued to recvmsg prequeue.
1 bytes directly received in process context from prequeue
15204 packet headers predicted
529 acknowledgments not containing data payload received
423 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
4 other TCP timeouts
104 packets collapsed in receive queue due to low socket buffer
1 DSACKs sent for old packets
2 connections reset due to unexpected data
1 connections aborted due to timeout
IpExt:
InMcastPkts: 27
OutMcastPkts: 12
InBcastPkts: 523
InOctets: 24938190
OutOctets: 901143
InMcastOctets: 6508
OutMcastOctets: 2701
InBcastOctets: 81186
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Samsung Electronics Co Ltd Device [144d:9602]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0000000-d01fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0200000-d02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0300000-d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8430 [size=4]
Region 2: I/O ports at 8420 [size=8]
Region 3: I/O ports at 8410 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at d0608c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383] (rev 40)
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d] (rev 40)
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0608800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc M880G [Mobility
Radeon HD 4200] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD
4200] [1002:970f]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d0110000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E
Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Device [144d:c566]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a5c:219c Broadcom Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 2232:1001
Bus 002 Device 002: ID 13fe:1f23 Kingston Technology Company Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (900, 'stable-updates'), (900, 'stable'), (700, 'testing'), (600,
'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initr 0.102 generic modular initramfs generato
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-32 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-brcm80211 0.35 Binary firmware for Broadcom 802.1
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
ii firmware-linux 0.35 Binary firmware for various driver
ii firmware-linux-nonfree 0.35 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20120514142426.3888.69295.reportbug@lisko
