Your message dated Thu, 10 May 2012 15:00:30 +0200
with message-id <4fabbbee.30...@debian.org>
and subject line Re: Bug#672353: IPv6 does not work
has caused the Debian Bug report #672353,
regarding IPv6 does not work
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
672353: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672353
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-44
Severity: grave
Tags: squeeze
Hello,
Since the upgrade linux-image-2.6.32-5-kirkwood 2.6.32-41squeeze2 ->
2.6.32-44, IPv6 is no longer working:
$ sudo modprobe ipv6
FATAL: Error inserting ipv6
(/lib/modules/2.6.32-5-kirkwood/kernel/net/ipv6/ipv6.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
$ dmesg | tail
[ 859.528092] ipv6: Unknown symbol sock_queue_err_skb
[ 955.738434] ipv6: Unknown symbol sock_queue_err_skb
[ 955.823919] ipv6: Unknown symbol sock_queue_err_skb
[ 956.146015] ipv6: Unknown symbol sock_queue_err_skb
[ 956.231203] ipv6: Unknown symbol sock_queue_err_skb
[ 960.375556] ipv6: Unknown symbol sock_queue_err_skb
[ 960.483456] ipv6: Unknown symbol sock_queue_err_skb
[ 1160.345399] ipv6: Unknown symbol sock_queue_err_skb
[ 1160.474001] ipv6: Unknown symbol sock_queue_err_skb
[ 1228.298415] ipv6: Unknown symbol sock_queue_err_skb
A new "ipv6: Unknown symbol sock_queue_err_skb" appears each time I
try to load the ipv6 module.
Cheers,
--
Stéphane
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-39squeeze1) (da...@debian.org)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Jan 12 01:10:21 UTC 2012
** Command line:
root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
** Not tainted
** Kernel log:
[ 24.095568] orion-ehci orion-ehci.0: new USB bus registered, assigned bus
number 1
[ 24.122391] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 24.142379] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 24.142457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 24.142479] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 24.142502] usb usb1: Product: Marvell Orion EHCI
[ 24.142518] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 24.142537] usb usb1: SerialNumber: orion-ehci.0
[ 24.143108] usb usb1: configuration #1 chosen from 1 choice
[ 24.143435] hub 1-0:1.0: USB hub found
[ 24.143508] hub 1-0:1.0: 1 port detected
[ 24.442379] ata5: SATA link down (SStatus 0 SControl F300)
[ 24.462379] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 24.602397] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 24.613701] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 24.613726] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 24.613747] usb 1-1: Product: USB2.0 Hub
[ 24.614279] usb 1-1: configuration #1 chosen from 1 choice
[ 24.614860] hub 1-1:1.0: USB hub found
[ 24.615203] hub 1-1:1.0: 4 ports detected
[ 24.642410] ata1.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133
[ 24.642439] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 24.682475] ata1.00: configured for UDMA/133
[ 24.682802] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0
PQ: 0 ANSI: 5
[ 25.192394] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 25.232417] ata2.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133
[ 25.232448] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 25.272470] ata2.00: configured for UDMA/133
[ 25.272786] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0
PQ: 0 ANSI: 5
[ 25.299347] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 25.299386] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 25.299640] sd 0:0:0:0: [sda] Write Protect is off
[ 25.299663] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.300291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.300935] sda:
[ 25.301536] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 25.301572] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 25.301820] sd 1:0:0:0: [sdb] Write Protect is off
[ 25.301844] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 25.301948] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.302624] sdb: sda1
[ 25.311268] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.315545] sdb1
[ 25.317482] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 25.622388] ata3: SATA link down (SStatus 0 SControl 300)
[ 25.972385] ata4: SATA link down (SStatus 0 SControl 300)
[ 26.322381] ata6: SATA link down (SStatus 0 SControl F300)
[ 26.692613] md: raid1 personality registered for level 1
[ 26.751515] md: md0 stopped.
[ 26.770724] md: bind<sdb1>
[ 26.771104] md: bind<sda1>
[ 26.779526] raid1: raid set md0 active with 2 out of 2 mirrors
[ 26.779653] md0: detected capacity change from 0 to 1000202174464
[ 26.783968] md0: unknown partition table
[ 27.024226] device-mapper: uevent: version 1.0.3
[ 27.026396] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 27.309962] kjournald starting. Commit interval 5 seconds
[ 27.310018] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.680010] udev[218]: starting version 164
[ 29.193874] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 30.312755] EXT3 FS on dm-0, internal journal
[ 30.839829] loop: module loaded
[ 31.923147] Adding 1048568k swap on /dev/mapper/qnap0-swap. Priority:-1
extents:1 across:1048568k
[ 33.793397] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[ 33.897063] kjournald starting. Commit interval 5 seconds
[ 33.902586] EXT3 FS on dm-1, internal journal
[ 33.902617] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.923741] kjournald starting. Commit interval 5 seconds
[ 33.932640] EXT3 FS on dm-2, internal journal
[ 33.932670] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.242878] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 45.745820] ipv6: Unknown symbol sock_queue_err_skb
[ 46.190097] fuse init (API version 7.13)
[ 48.343100] RPC: Registered udp transport module.
[ 48.343132] RPC: Registered tcp transport module.
[ 48.343147] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.560003] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 48.781608] ipv6: Unknown symbol sock_queue_err_skb
[ 48.813434] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 48.841193] NFSD: starting 90-second grace period
[ 64.453940] ipv6: Unknown symbol sock_queue_err_skb
[ 66.165266] tun: Universal TUN/TAP device driver, 1.6
[ 66.165301] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 66.550887] ipv6: Unknown symbol sock_queue_err_skb
[ 66.724532] ipv6: Unknown symbol sock_queue_err_skb
[ 259.497558] ipv6: Unknown symbol sock_queue_err_skb
[ 259.583071] ipv6: Unknown symbol sock_queue_err_skb
[ 560.180006] ipv6: Unknown symbol sock_queue_err_skb
[ 560.265461] ipv6: Unknown symbol sock_queue_err_skb
[ 704.494661] ipv6: Unknown symbol sock_queue_err_skb
[ 777.547166] ipv6: Unknown symbol sock_queue_err_skb
[ 785.474036] ipv6: Unknown symbol sock_queue_err_skb
[ 859.442424] ipv6: Unknown symbol sock_queue_err_skb
[ 859.528092] ipv6: Unknown symbol sock_queue_err_skb
[ 955.738434] ipv6: Unknown symbol sock_queue_err_skb
[ 955.823919] ipv6: Unknown symbol sock_queue_err_skb
[ 956.146015] ipv6: Unknown symbol sock_queue_err_skb
[ 956.231203] ipv6: Unknown symbol sock_queue_err_skb
[ 960.375556] ipv6: Unknown symbol sock_queue_err_skb
[ 960.483456] ipv6: Unknown symbol sock_queue_err_skb
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : QNAP TS-41x
Revision : 0000
** Loaded modules:
Module Size Used by
tun 10938 2
nfsd 247560 11
lockd 63165 1 nfsd
nfs_acl 2277 1 nfsd
auth_rpcgss 33334 1 nfsd
sunrpc 171335 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3000 1 nfsd
fuse 51352 1
ext4 288593 1
jbd2 64351 1 ext4
loop 11427 0
dm_crypt 11574 0
hmac 2475 0
sha1_generic 1717 0
evdev 6582 0
mv_cesa 9262 0
gpio_keys 3066 0
aes_generic 32820 1 mv_cesa
dm_mod 56939 17 dm_crypt
raid1 19765 1
md_mod 80470 2 raid1
ext3 111292 3
jbd 37678 1 ext3
ext2 55355 0
mbcache 4860 3 ext4,ext3,ext2
sd_mod 31360 4
crc_t10dif 1106 1 sd_mod
ehci_hcd 36541 0
sata_mv 24406 2
usbcore 122759 2 ehci_hcd
mv643xx_eth 22574 0
libata 137954 1 sata_mv
nls_base 5367 1 usbcore
libphy 14844 1 mv643xx_eth
inet_lro 5060 1 mv643xx_eth
scsi_mod 124300 2 sd_mod,libata
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:08:9b:c4:04:ee brd ff:ff:ff:ff:ff:ff
inet 192.168.39.3/24 brd 192.168.39.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:08:9b:c4:04:ef brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 10172 121 0 0 0 0 0 0 10172
121 0 0 0 0 0 0
eth0: 614149 3456 0 0 0 0 0 0 954681
3311 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5237 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
5235 incoming packets delivered
4892 requests sent out
Icmp:
16 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 13
echo requests: 2
echo replies: 1
16 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 13
echo request: 1
echo replies: 2
IcmpMsg:
InType0: 1
InType3: 13
InType8: 2
OutType0: 2
OutType3: 13
OutType8: 1
Tcp:
9 active connections openings
4 passive connection openings
3 failed connection attempts
0 connection resets received
1 connections established
1847 segments received
1650 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
3372 packets received
0 packets to unknown port received.
0 packet receive errors
3226 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
62 delayed acks sent
611 packets directly queued to recvmsg prequeue.
3003 bytes directly received in process context from prequeue
353 packet headers predicted
192 packets header predicted and directly queued to user
122 acknowledgments not containing data payload received
1084 predicted acknowledgments
IpExt:
InOctets: 670491
OutOctets: 1572574
** PCI devices:
00:00.0 Memory controller [0580]: Marvell Technology Group Ltd. 88F6281
[Kirkwood] ARM SoC [11ab:6281] (rev 03)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at <ignored> (64-bit, prefetchable)
Capabilities: <access denied>
00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042
PCI-e 4-port SATA-II [11ab:7042] (rev 02)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at 1000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_mv
Kernel modules: sata_mv
** Sound cards:
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-44 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
ii firmware-linux-free 2.6.32-44 Binary firmware for various driver
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-kirkwood/postinst/bootloader-error-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/bootloader-test-error-2.6.32-5-kirkwood:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood:
false
linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/prerm/would-invalidate-boot-loader-2.6.32-5-kirkwood:
true
linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood:
true
--- End Message ---
--- Begin Message ---
Le 10/05/2012 14:35, Bastian Blank a écrit :
> On Thu, May 10, 2012 at 11:59:10AM +0200, Stéphane Glondu wrote:
>> ** Version:
>> Linux version 2.6.32-5-kirkwood (Debian 2.6.32-39squeeze1)
>> (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu Jan 12
>> 01:10:21 UTC 2012
>
> This is not -44. We expect users to reboot after an upgrade.
Ah, right. I didn't pay attention. I had rebooted because of the kernel
upgrade in the first place... but it seems that the new kernel hadn't
been flashed. I've run flash-kernel (I thought it was done
automatically), rebooted and it works now.
Thanks for the quick diagnostic and sorry for the noise!
Cheers,
--
Stéphane
--- End Message ---
