Package: linux-2.6
Version: 3.2.16-1
Severity: normal
Stops short of loading INIT:
Loading.: Debian GNU/Linux
Starting: Debian GNU/Linux
ELILO v3.12 for EFI/IA-64
..
Uncompressing Linux... done
Loading file \EFI\debian\initrd.img...done
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-mckinley (Debian 3.2.16-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP
Mon Apr 30 08:32:39 UTC 2012
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000
SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] Early serial console at MMIO 0xf8050000 (options '9600n8')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 0009C (v01 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb369e0 000F4 (v03 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16
(20110623/tbfadt-529)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16
(20110623/tbfadt-529)
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP rx2600 00000007
INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb36ad8 00040
[ 0.000000] ACPI: SPCR 000000003fb36b18 00050 (v01 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb36b68 00034 (v01 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb36c28 000C0 (v01 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb36ba0 00050 (v04 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb36bf0 00034 (v01 HP rx2600 00000000
HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 001D6 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33a50 00342 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33da0 00A16 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb347c0 00A16 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb351e0 00A16 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb35c00 00A16 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36620 001D8 (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36800 000EB (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb368f0 000EF (v01 HP rx2600 00000006
INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe0000040fdea5000 (17744800 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7200000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000400 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x01040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000400 -> 0x0000fd79
[ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
[ 0.000000] 0: 0x00040000 -> 0x00060000
[ 0.000000] 0: 0x01010000 -> 0x0103ff3a
[ 0.000000] 0: 0x0103ff49 -> 0x0103ff84
[ 0.000000] 0: 0x0103ffa0 -> 0x0103fff0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 333260
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/vmlinuz
root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Memory: 6202848k/6233536k available (7787k code, 61104k
reserved, 4468k data, 1184k init)
[ 0.000000] Leaving McKinley Errata 9 workaround enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:1024
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 36 (level, low) -> CPU 0 (0x0000) vector 49
[ 0.000000] Console: colour VGA+ 80x25
[ 0.004000] Calibrating delay loop... 1343.48 BogoMIPS (lpj=2686976)
[ 0.016100] pid_max: default: 32768 minimum: 301
[ 0.016521] Security Framework initialized
[ 0.017470] AppArmor: AppArmor disabled by boot time parameter
[ 0.018253] Dentry cache hash table entries: 1048576 (order: 9, 8388608
bytes)
[ 0.037785] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.043205] Mount-cache hash table entries: 1024
[ 0.044283] Initializing cgroup subsys cpuacct
[ 0.044483] Initializing cgroup subsys memory
[ 0.048313] Initializing cgroup subsys devices
[ 0.048460] Initializing cgroup subsys freezer
[ 0.056007] Initializing cgroup subsys net_cls
[ 0.056150] Initializing cgroup subsys blkio
[ 0.056367] ACPI: Core revision 20110623
[ 0.074547] Boot processor id 0x0/0x0
[ 0.000000] Fixed BSP b0 value from CPU 1
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr
441 cycles)
[ 0.086608] Brought up 2 CPUs
[ 0.086707] Total of 2 processors activated (2686.97 BogoMIPS).
[ 0.088030] devtmpfs: initialized
[ 0.094178] DMI 2.3 present.
[ 0.094178] print_constraints: dummy:
[ 0.094178] NET: Registered protocol family 16
[ 0.100225] ACPI: bus type pci registered
[ 0.104298] bio: create slab <bio-0> at 0
[ 0.108093] ACPI: Added _OSI(Module Device)
[ 0.108093] ACPI: Added _OSI(Processor Device)
[ 0.108151] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.576148] ACPI: Interpreter enabled
[ 0.576263] ACPI: (supports S0 S5)
[ 0.576398] ACPI: Using IOSAPIC for interrupt routing
[ 2.964985] ACPI: No dock devices found.
[ 3.176450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[ 3.600455] pci_root HWP0002:00: host bridge window [io 0x0000-0x03af]
[ 3.600663] pci_root HWP0002:00: host bridge window [io 0x03e0-0x1fff]
[ 3.601090] pci_root HWP0002:00: host bridge window [mem
0x80000000-0x8fffffff]
[ 3.601322] pci_root HWP0002:00: host bridge window [mem
0x80004000000-0x80103fffffe]
[ 3.756184] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 3.756363] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 3.756842] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 3.968452] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
[ 4.396458] pci_root HWP0002:01: host bridge window [mem
0xff5e0000-0xff5e0007]
[ 4.396686] pci_root HWP0002:01: host bridge window [mem
0xff5e2000-0xff5e2007]
[ 4.397140] pci_root HWP0002:01: host bridge window [io 0x2000-0x2fff]
[ 4.397351] pci_root HWP0002:01: host bridge window [mem
0x90000000-0x97ffffff]
[ 4.404006] pci_root HWP0002:01: host bridge window [mem
0x90004000000-0x90103fffffe]
[ 4.508150] pci0000:20: Requesting ACPI _OSC control (0x1d)
[ 4.508328] pci0000:20: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 4.508793] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 4.924449] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 40-5f])
[ 5.324446] pci_root HWP0002:02: host bridge window [io 0x3000-0x5fff]
[ 5.324652] pci_root HWP0002:02: host bridge window [mem
0x98000000-0xafffffff]
[ 5.325121] pci_root HWP0002:02: host bridge window [mem
0xa0004000000-0xa0103fffffe]
[ 5.532173] pci0000:40: Requesting ACPI _OSC control (0x1d)
[ 5.532353] pci0000:40: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 5.532842] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 5.720448] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 60-7f])
[ 6.096438] pci_root HWP0002:03: host bridge window [io 0x6000-0x7fff]
[ 6.096643] pci_root HWP0002:03: host bridge window [mem
0xb0000000-0xc7ffffff]
[ 6.097109] pci_root HWP0002:03: host bridge window [mem
0xb0004000000-0xb0103fffffe]
[ 6.312172] pci0000:60: Requesting ACPI _OSC control (0x1d)
[ 6.312352] pci0000:60: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 6.312838] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 7.076446] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 80-bf])
[ 7.452448] pci_root HWP0002:04: host bridge window [io 0x8000-0xbfff]
[ 7.452656] pci_root HWP0002:04: host bridge window [mem
0xc8000000-0xdfffffff]
[ 7.453098] pci_root HWP0002:04: host bridge window [mem
0xc0004000000-0xc0103fffffe]
[ 7.660173] pci0000:80: Requesting ACPI _OSC control (0x1d)
[ 7.660351] pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 7.660842] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 7.848447] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus c0-df])
[ 8.232429] pci_root HWP0002:05: host bridge window [io 0xc000-0xdfff]
[ 8.232638] pci_root HWP0002:05: host bridge window [mem
0xe0000000-0xefffffff]
[ 8.233218] pci_root HWP0002:05: host bridge window [mem
0xe0004000000-0xe0103fffffe]
[ 8.440172] pci0000:c0: Requesting ACPI _OSC control (0x1d)
[ 8.440350] pci0000:c0: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 8.440833] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 8.700450] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus e0-ff])
[ 9.220456] pci_root HWP0002:06: host bridge window [io 0x03b0-0x03df]
[ 9.220664] pci_root HWP0002:06: host bridge window [io 0xe000-0xffff]
[ 9.221093] pci_root HWP0002:06: host bridge window [mem
0x000a0000-0x000fffff]
[ 9.221329] pci_root HWP0002:06: host bridge window [mem
0xf0000000-0xfdffffff]
[ 9.228006] pci_root HWP0002:06: host bridge window [mem
0xf0004000000-0xf0103fffffe]
[ 9.320131] pci0000:e0: Requesting ACPI _OSC control (0x1d)
[ 9.320312] pci0000:e0: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 9.320816] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 9.324865] vgaarb: device added:
PCI:0000:e0:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 9.328004] vgaarb: loaded
[ 9.328094] vgaarb: bridge control possible 0000:e0:02.0
[ 10.427048] IOC: zx1 2.2 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 11.316266] Switching to clocksource itc
[ 11.316663] pnp: PnP ACPI init
[ 11.316797] ACPI: bus type pnp registered
[ 12.891870] GSI 34 (edge, high) -> CPU 1 (0x0100) vector 50
[ 12.915831] GSI 35 (edge, high) -> CPU 0 (0x0000) vector 51
[ 14.768316] pnp: PnP ACPI: found 11 devices
[ 14.768448] ACPI: ACPI bus type pnp unregistered
[ 14.775858] NET: Registered protocol family 2
[ 14.776406] IP route cache hash table entries: 262144 (order: 7, 2097152
bytes)
[ 14.782408] TCP established hash table entries: 524288 (order: 9, 8388608
bytes)
[ 14.792266] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 14.793656] TCP: Hash tables configured (established 524288 bind 65536)
[ 14.794891] TCP reno registered
[ 14.795010] UDP hash table entries: 4096 (order: 3, 131072 bytes)
[ 14.802619] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes)
[ 14.803480] NET: Registered protocol family 1
[ 14.810215] GSI 16 (level, low) -> CPU 1 (0x0100) vector 52
[ 14.810399] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 52
[ 14.817771] pci 0000:00:01.0: PCI INT A disabled
[ 14.817923] GSI 16 (level, low) -> CPU 1 (0x0100) vector 52 unregistered
[ 14.825808] GSI 17 (level, low) -> CPU 0 (0x0000) vector 52
[ 14.825989] pci 0000:00:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 53
[ 14.833420] pci 0000:00:01.1: PCI INT B disabled
[ 14.833571] GSI 17 (level, low) -> CPU 0 (0x0000) vector 52 unregistered
[ 14.841206] GSI 18 (level, low) -> CPU 1 (0x0100) vector 52
[ 14.841384] pci 0000:00:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 54
[ 14.848772] pci 0000:00:01.2: PCI INT C disabled
[ 14.848921] GSI 18 (level, low) -> CPU 1 (0x0100) vector 52 unregistered
[ 14.856514] pci 0000:00:03.0: Firmware left e100 interrupts enabled;
disabling
[ 14.864493] Unpacking initramfs...
[ 15.862318] Freeing initrd memory: 17312kB freed
[ 15.863184] perfmon: version 2.0 IRQ 238
[ 15.863316] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters
(47 bits)
[ 15.864972] perfmon: added sampling format default_format
[ 15.865143] perfmon_default_smpl: default_format v2.0 registered
[ 15.871915] audit: initializing netlink socket (disabled)
[ 15.872109] type=2000 audit(1335871476.867:1): initialized
[ 15.927463] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 15.928372] VFS: Disk quotas dquot_6.5.2
[ 15.928759] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 15.929530] msgmni has been set to 12148
[ 15.930204] alg: No test for stdrng (krng)
[ 15.936806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 15.937041] io scheduler noop registered
[ 15.944538] io scheduler deadline registered
[ 15.944752] io scheduler cfq registered (default)
[ 15.952349] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.952605] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 15.959814] sn_pci_hotplug_init: PROM version does not support hotplug.
[ 15.960299] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 15.967474] ACPI: Power Button [PWRF]
[ 15.967713] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 15.975830] ACPI: Sleep Button [SLPF]
[ 17.500963] thermal LNXTHERM:00: registered as thermal_zone0
[ 17.501139] ACPI: Thermal Zone [THM0] (27 C)
[ 17.501437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 17.522688] 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 50) is a 16550A
[ 17.543304] 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 51) is a 16550A
[ 17.543938] GSI 82 (level, low) -> CPU 0 (0x0000) vector 52
[ 17.544350] serial 0000:e0:01.0: PCI INT A -> GSI 82 (level, low) -> IRQ 55
[ 17.566387] 0000:e0:01.0: ttyS2 at MMIO 0xf8051000 (irq = 55) is a 16550A
[ 17.566837] serial 0000:e0:01.1: PCI INT A -> G[ 17.589098] 0000:e0:01.1:
ttyS3 at MMIO 0xf8050000 (irq = 55) is a 16550A
[ 17.589684] console [ttyS3] enabled, bootconsole disabled
[ 17.589684] console [ttyS3] enabled, bootconsole disabled
[ 17.590612] Couldn't register serial port 0000:e0:01.1: -28
[ 17.600263] Linux agpgart interface v0.103
[ 18.012607] mousedev: PS/2 mouse device common for all mice
[ 18.014961] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 18.016056] TCP cubic registered
[ 18.016175] NET: Registered protocol family 17
[ 18.016326] Registering the dns_resolver key type
[ 18.023021] registered taskstats version 1
[ 18.028842] rtc-efi rtc-efi: setting system clock to 2012-05-01 11:24:39 UTC
(1335871479)
[ 18.033663] Freeing unused kernel memory: 1184kB freed
Loading, please wait...
[waiting forever]
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: hp
product_name: server rx2600
product_version:
bios_vendor: HP
bios_version: 02.31
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping eth1
script grep
map eth1
# The primary network interface
auto eth1
allow-hotplug eth1
iface eth1 inet static
address 147.215.7.112
network 147.215.7.0
netmask 255.255.255.0
broadcast 147.215.7.255
gateway 147.215.7.1
mtu 9000
** PCI devices:
00:01.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 80023000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:01.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 0
Region 0: Memory at 80022000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:01.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
(prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 0
Region 0: Memory at 80021000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to
ATA Host Controller [1095:0649] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host
Controller [1095:0649]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 57
Region 0: I/O ports at 0d58 [size=8]
Region 1: I/O ports at 0d64 [size=4]
Region 2: I/O ports at 0d50 [size=8]
Region 3: I/O ports at 0d60 [size=4]
Region 4: I/O ports at 0d40 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_cmd64x
00:03.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 [8086:1229] (rev 0d)
Subsystem: Hewlett-Packard Company Device [103c:1274]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 53
Region 0: Memory at 80020000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 0d00 [size=64]
Region 2: Memory at 80000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e100
20:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 58
Region 0: I/O ports at 2100 [size=256]
Region 1: Memory at 90840000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90830000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 90400000 [disabled] [size=4M]
Capabilities: <access denied>
Kernel driver in use: mptspi
20:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 59
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at 90820000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90810000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 90000000 [disabled] [size=4M]
Capabilities: <access denied>
Kernel driver in use: mptspi
20:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet [14e4:1645] (rev 15)
Subsystem: Hewlett-Packard Company Core Lan 1000Base-T [103c:12a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (16000ns min), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
60:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz
Ultra3 SCSI Adapter [1000:0021] (rev 01)
Subsystem: Hewlett-Packard Company Ultra160 SCSI [A7060A] [103c:1340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 55
Region 0: I/O ports at 6100 [size=256]
Region 1: Memory at b0045000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at b0042000 (64-bit, non-prefetchable) [size=8K]
Expansion ROM at b0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sym53c8xx
60:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1010 66MHz
Ultra3 SCSI Adapter [1000:0021] (rev 01)
Subsystem: Hewlett-Packard Company Ultra160 SCSI [A7060A] [103c:1340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 56
Region 0: I/O ports at 6000 [size=256]
Region 1: Memory at b0044000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at b0040000 (64-bit, non-prefetchable) [size=8K]
Expansion ROM at b0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sym53c8xx
e0:01.0 Communication controller [0780]: Hewlett-Packard Company Auxiliary Diva
Serial Port [103c:1290] (rev 01)
Subsystem: Hewlett-Packard Company Diva SP2 [103c:1291]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 52
Region 2: Memory at f8051000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: serial
e0:01.1 Serial controller [0700]: Hewlett-Packard Company Diva Serial [GSP]
Multiport UART [103c:1048] (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Everest SP2 [103c:1282]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f8050000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at f8020000 (32-bit, prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: serial
e0:02.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:12ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at f8040000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
** USB devices:
not available
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: ia64
Kernel: Linux 2.6.29.2 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=locale: Cannot set
LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-mckinley depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-mckinley recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-2-mckinley suggests:
pn elilo 3.12-4.1
pn fdutils <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-mckinley is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
linux-image-3.2.0-2-mckinley/postinst/missing-firmware-3.2.0-2-mckinley:
linux-image-3.2.0-2-mckinley/prerm/removing-running-kernel-3.2.0-2-mckinley:
true
linux-image-3.2.0-2-mckinley/postinst/depmod-error-initrd-3.2.0-2-mckinley:
false
linux-image-3.2.0-2-mckinley/postinst/ignoring-ramdisk:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120501121058.2956.89516.report...@morgoth.esiee.fr
