--- Begin Message ---
Package: linux-2.6
Version: 3.0.0-3
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
I have an iPod Classic formatted with hfsplus on a Mac. It could be
successfully mounted with the old linux-2.6.32-5 kernel. But upgraded my system
from Stable(Squeeze) to Testing(Wheezy) and the kernel was also upgraded to
linux-3.0.0-1, and my iPod can never be mounted.
Report by the mount when using linux-3.0.0-1:
Error mounting: mount: wrong fs type, bad option, bad
superblock on /dev/sdc3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
When I boot my system with the old kernel, mounting will succeed.
How can I help to fix this problem?
Best Regard!
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-3.0.0-1-amd64
root=UUID=5b7d3292-55f8-4aaf-8afb-a73cf34612e7 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 25.810173] Bluetooth: RFCOMM socket layer initialized
[ 25.810174] Bluetooth: RFCOMM ver 1.11
[ 35.455978] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 38.014641] EXT4-fs (sdb6): re-mounted. Opts: commit=0
[ 120.755256] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 120.756810] ISOFS: changing to secondary root
[ 124.079114] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 132.303976] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 134.097207] hda-intel: Invalid position buffer, using LPIB read method
instead.
[ 134.101929] hda-intel: IRQ timing workaround is activated for card #0.
Suggest a bigger bdl_pos_adj.
[ 135.672586] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 136.071469] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 141.303516] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 144.610663] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 150.684163] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 167.785214] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 167.792135] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 167.821984] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 167.845142] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 167.912012] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 168.077181] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 168.276419] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 168.356151] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 168.506633] TCP: Possible SYN flooding on port 4711. Sending cookies.
[ 448.308138] usb 1-3.2: new high speed USB device number 6 using ehci_hcd
[ 448.401616] usb 1-3.2: New USB device found, idVendor=090c, idProduct=6300
[ 448.401623] usb 1-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 448.401628] usb 1-3.2: Product: USB2.0 Card Reader
[ 448.401632] usb 1-3.2: Manufacturer: SMI
[ 448.401635] usb 1-3.2: SerialNumber: 12345678901234567890
[ 448.402071] scsi6 : usb-storage 1-3.2:1.0
[ 450.533169] scsi 6:0:0:0: Direct-Access SMI Reader 1.00
PQ: 0 ANSI: 0 CCS
[ 450.549614] sd 6:0:0:0: [sde] 250880 512-byte logical blocks: (128 MB/122
MiB)
[ 450.550621] sd 6:0:0:0: [sde] Write Protect is off
[ 450.550624] sd 6:0:0:0: [sde] Mode Sense: 4b 00 00 08
[ 450.551379] sd 6:0:0:0: [sde] No Caching mode page present
[ 450.551385] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 450.554373] sd 6:0:0:0: [sde] No Caching mode page present
[ 450.554379] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 450.560529] sde: sde1
[ 450.563868] sd 6:0:0:0: [sde] No Caching mode page present
[ 450.563872] sd 6:0:0:0: [sde] Assuming drive cache: write through
[ 450.563874] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 452.227168] FAT-fs (sde1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 452.227171]
[ 452.546380] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.546387] FAT-fs (sde1): Filesystem has been set read-only
[ 452.546714] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.546892] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547065] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547241] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547414] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547586] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547760] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.547933] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 452.548120] FAT-fs (sde1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 629.508536] WARNING! power/level is deprecated; use power/control instead
[ 630.640299] usb 1-3.2: USB disconnect, device number 6
[ 1139.872106] sd 4:0:0:0: [sdc] Bad block number requested
[ 1139.872114] hfs: unable to find HFS+ superblock
[ 2005.916262] usb 1-2: USB disconnect, device number 3
[ 2230.292029] usb 1-2: new high speed USB device number 7 using ehci_hcd
[ 2230.425359] usb 1-2: New USB device found, idVendor=05ac, idProduct=1261
[ 2230.425361] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2230.425363] usb 1-2: Product: iPod
[ 2230.425364] usb 1-2: Manufacturer: Apple Inc.
[ 2230.425365] usb 1-2: SerialNumber: 000A270021002FEB
[ 2230.435741] scsi7 : usb-storage 1-2:1.0
[ 2231.444226] scsi 7:0:0:0: Direct-Access Apple iPod 1.62
PQ: 0 ANSI: 0
[ 2231.598371] sd 7:0:0:0: [sdc] Spinning up disk....ready
[ 2235.652621] sd 7:0:0:0: [sdc] 39023511 4096-byte logical blocks: (159 GB/148
GiB)
[ 2235.653113] sd 7:0:0:0: [sdc] Write Protect is off
[ 2235.653115] sd 7:0:0:0: [sdc] Mode Sense: 68 00 00 08
[ 2235.654162] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2235.655235] sd 7:0:0:0: [sdc] 39023511 4096-byte logical blocks: (159 GB/148
GiB)
[ 2235.700367] sdc: [mac] sdc1 sdc2 sdc3 sdc4
[ 2235.703355] sd 7:0:0:0: [sdc] 39023511 4096-byte logical blocks: (159 GB/148
GiB)
[ 2235.704616] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 2236.438634] sd 7:0:0:0: [sdc] Bad block number requested
[ 2236.438643] hfs: unable to find HFS+ superblock
[ 2236.548303] sd 7:0:0:0: [sdc] Bad block number requested
[ 2236.548314] hfs: unable to find HFS+ superblock
[ 2349.615033] sd 7:0:0:0: [sdc] Bad block number requested
[ 2349.615043] hfs: unable to find HFS+ superblock
[ 2415.380569] sd 7:0:0:0: [sdc] Bad block number requested
[ 2415.380580] hfs: unable to find HFS+ superblock
[ 2508.296612] sd 7:0:0:0: [sdc] Bad block number requested
[ 2508.296626] hfs: unable to find HFS+ superblock
[ 2513.845068] usb 1-2: USB disconnect, device number 7
[ 3542.599310] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 3542.604072] SGI XFS Quota Management subsystem
[ 3542.625412] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3542.688663] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 3542.778738] QNX4 filesystem 0.2.3 registered.
[ 3695.021426] Disabling lock debugging due to kernel taint
[ 3695.027113] vboxdrv: Found 2 processor cores.
[ 3695.027566] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x940
[ 3695.028227] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 3695.028231] vboxdrv: Successfully loaded version 4.1.4_Debian (interface
0x00190000).
[ 3695.040911] vboxpci: IOMMU not found (not registered)
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: XZX Development&Technology CO.,LTD
board_name: ELG41 Series
board_version: To be filled by O.E.M.
** Loaded modules:
Module Size Used by
pci_stub 12429 1
vboxpci 19059 0
vboxnetadp 13202 0
vboxnetflt 23595 0
vboxdrv 194054 3 vboxpci,vboxnetadp,vboxnetflt
ufs 63441 0
qnx4 13251 0
hfs 45981 0
minix 27903 0
ntfs 164941 0
msdos 17119 0
jfs 141917 0
xfs 603329 0
reiserfs 197263 0
hfsplus 75739 0
isofs 35232 1
mperf 12453 0
cpufreq_userspace 12576 0
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
cpufreq_stats 12862 0
rfcomm 33848 10
bnep 17615 2
binfmt_misc 13040 1
fuse 66430 1
ext3 114399 3
jbd 43355 1 ext3
nls_utf8 12456 2
nls_cp437 16553 1
vfat 17270 1
fat 45828 2 msdos,vfat
ext2 63732 1
loop 22711 0
dm_crypt 22611 0
kvm_intel 47257 0
kvm 268970 1 kvm_intel
joydev 17262 0
nouveau 516733 2
ttm 52979 1 nouveau
drm_kms_helper 27216 1 nouveau
drm 163280 4 nouveau,ttm,drm_kms_helper
snd_hda_codec_realtek 278027 1
btusb 17462 2
bluetooth 114376 23 rfcomm,bnep,btusb
snd_hda_intel 26140 1
snd_hda_codec 72699 2 snd_hda_codec_realtek,snd_hda_intel
i2c_algo_bit 12850 1 nouveau
iTCO_wdt 17081 0
iTCO_vendor_support 12704 1 iTCO_wdt
rfkill 19080 3 bluetooth
snd_hwdep 13186 1 snd_hda_codec
mxm_wmi 12473 1 nouveau
parport_pc 22395 0
snd_pcm_oss 41257 1
snd_mixer_oss 17969 1 snd_pcm_oss
rng_core 12696 0
snd_pcm 68104 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
wmi 13243 1 mxm_wmi
video 17707 1 nouveau
pcspkr 12579 0
snd_timer 22581 1 snd_pcm
snd 52823 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
processor 27942 0
thermal_sys 17949 2 video,processor
evdev 17558 8
firewire_sbp2 18062 0
i2c_i801 16870 0
soundcore 13152 2 snd
i2c_core 23909 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
parport 31929 1 parport_pc
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
button 12930 1 nouveau
ext4 313917 2
mbcache 13066 3 ext3,ext2,ext4
jbd2 62574 1 ext4
crc16 12343 2 bluetooth,ext4
btrfs 504516 0
zlib_deflate 25570 1 btrfs
crc32c 12656 1
libcrc32c 12426 1 btrfs
dm_mod 63164 1 dm_crypt
usbhid 40516 0
hid 73172 1 usbhid
usb_storage 47996 0
uas 13299 0
sd_mod 36259 10
sr_mod 21811 1
cdrom 35093 1 sr_mod
crc_t10dif 12348 1 sd_mod
ata_generic 12479 0
uhci_hcd 26787 0
floppy 53265 0
ata_piix 25358 9
firewire_ohci 35553 0
firewire_core 48371 2 firewire_sbp2,firewire_ohci
crc_itu_t 12347 1 firewire_core
r8169 42411 0
mii 12675 1 r8169
libata 149043 2 ata_generic,ata_piix
ehci_hcd 40090 0
scsi_mod 162442 6
firewire_sbp2,usb_storage,uas,sd_mod,sr_mod,libata
usbcore 128338 7 btusb,usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e30] (rev 03)
Subsystem: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e31] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe2fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP [8086:27d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe300000-fe3fffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1
[8086:27c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2
[8086:27c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3
[8086:27ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4
[8086:27cb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at b480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller
[8086:27cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9ffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe400000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
Bridge [8086:27b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller
[8086:27df]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE
Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation N10/ICH7 Family SATA IDE Controller
[8086:27c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b080 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at a880 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 01)
Subsystem: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 9300
GS] [10de:06e1] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Device [7377:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
Expansion ROM at fe2e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI
Express Fast Ethernet controller [10ec:8136]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fe3ff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f8ff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fe3c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire
II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394
OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:0b.0 Communication controller [0780]: Intel Corporation 536EP Data Fax Modem
[8086:1040]
Subsystem: Intel Corporation Device [8086:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe400000 (32-bit, non-prefetchable) [size=4M]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
Bus 001 Device 005: ID 1bcf:0501 Sunplus Innovation Technology Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing'), (500,
'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=zh_CN.utf8, LC_CTYPE=zh_CN.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii grub-pc 1.99-14
ii linux-doc-3.0.0 3.0.0-3
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
* linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
--- End Message ---
