Package: linux-2.6
Version: 3.2.6-1
Severity: normal
Hello,
I was trying to copy an iso image to a rather lame Emgeton brand USB
stick (using factory FAT format on the stick).
While doing so after some time most applications become unresponsive.
I can log in on the console, local xterms work, xscreensaver and window
manager works, xterms showing remote session and firefox are stalled (no
screen updates), and so is gkrellm and kvm.
I don't see anything releavant in the log.
The load on the system as shown with atop is very light except for the
flash drive which is 100% busy.
-- Package-specific info:
** Version:
Linux version 3.2.0-1-amd64 (Debian 3.2.2-1) (b...@decadent.org.uk) (gcc
version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Wed Feb 1 08:56:58 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64
root=UUID=3b8f6a64-5899-462a-aec0-6ddefd878ecf ro fbcon=rotate:3 quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[4140240.021049] usb 3-2.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[4140240.021052] usb 3-2.1: Product: USB Productivity Option Keyboard( has the
hub in # 1 )
[4140240.021054] usb 3-2.1: Manufacturer: Lite-On Technology
[4140240.031290] input: Lite-On Technology USB Productivity Option Keyboard(
has the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input892
[4140240.031446] generic-usb 0003:04B3:301B.037B: input,hidraw0: USB HID v1.10
Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 )] on usb-0000:00:1a.0-2.1/input0
[4140240.036094] input: Lite-On Technology USB Productivity Option Keyboard(
has the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input893
[4140240.036200] generic-usb 0003:04B3:301B.037C: input,hidraw1: USB HID v1.10
Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1
)] on usb-0000:00:1a.0-2.1/input1
[4140240.109047] usb 3-2.2: new low-speed USB device number 92 using uhci_hcd
[4140240.247043] usb 3-2.2: New USB device found, idVendor=046d, idProduct=c063
[4140240.247047] usb 3-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[4140240.247050] usb 3-2.2: Product: DELL USB Laser Mouse
[4140240.247053] usb 3-2.2: Manufacturer: DELL
[4140240.265276] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input894
[4140240.265476] generic-usb 0003:046D:C063.037D: input,hidraw2: USB HID v1.10
Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.0-2.2/input0
[4140272.360038] usb 3-2: USB disconnect, device number 90
[4140272.360042] usb 3-2.1: USB disconnect, device number 91
[4140272.492114] usb 3-2.2: USB disconnect, device number 92
[4140272.832021] usb 3-2: new full-speed USB device number 93 using uhci_hcd
[4140272.992050] usb 3-2: unable to read config index 0 descriptor/all
[4140272.992056] usb 3-2: can't read configurations, error -71
[4140273.048043] hub 3-0:1.0: unable to enumerate USB device on port 2
[4140273.584026] usb 3-2: new full-speed USB device number 95 using uhci_hcd
[4140273.648041] hub 3-0:1.0: unable to enumerate USB device on port 2
[4140274.128014] usb 3-2: new full-speed USB device number 96 using uhci_hcd
[4140274.305051] usb 3-2: New USB device found, idVendor=04b3, idProduct=301a
[4140274.305054] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[4140274.305056] usb 3-2: Product: USB 1.1 2port downstream low power hub
[4140274.305058] usb 3-2: Manufacturer: Lite-On Technology
[4140274.313073] hub 3-2:1.0: USB hub found
[4140274.314047] hub 3-2:1.0: 3 ports detected
[4140274.593055] usb 3-2.1: new full-speed USB device number 97 using uhci_hcd
[4140274.741051] usb 3-2.1: New USB device found, idVendor=04b3, idProduct=301b
[4140274.741055] usb 3-2.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[4140274.741058] usb 3-2.1: Product: USB Productivity Option Keyboard( has the
hub in # 1 )
[4140274.741061] usb 3-2.1: Manufacturer: Lite-On Technology
[4140274.751301] input: Lite-On Technology USB Productivity Option Keyboard(
has the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input895
[4140274.751460] generic-usb 0003:04B3:301B.037E: input,hidraw0: USB HID v1.10
Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in #
1 )] on usb-0000:00:1a.0-2.1/input0
[4140274.756110] input: Lite-On Technology USB Productivity Option Keyboard(
has the hub in # 1 ) as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input896
[4140274.756202] generic-usb 0003:04B3:301B.037F: input,hidraw1: USB HID v1.10
Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1
)] on usb-0000:00:1a.0-2.1/input1
[4140274.829056] usb 3-2.2: new low-speed USB device number 98 using uhci_hcd
[4140274.967050] usb 3-2.2: New USB device found, idVendor=046d, idProduct=c063
[4140274.967054] usb 3-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[4140274.967057] usb 3-2.2: Product: DELL USB Laser Mouse
[4140274.967059] usb 3-2.2: Manufacturer: DELL
[4140274.985287] input: DELL DELL USB Laser Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input897
[4140274.985454] generic-usb 0003:046D:C063.0380: input,hidraw2: USB HID v1.10
Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.0-2.2/input0
[4141364.833296] usb 3-2.1: reset full-speed USB device number 97 using uhci_hcd
[4141365.361284] usb 3-2.2: reset low-speed USB device number 98 using uhci_hcd
[4141366.537285] usb 3-2.1: reset full-speed USB device number 97 using uhci_hcd
[4220077.418841] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input898
[4220132.305504] scsi_verify_blk_ioctl: 152 callbacks suppressed
[4220132.305507] grub-probe: sending ioctl 1261 to a partition!
[4220132.305509] grub-probe: sending ioctl 1261 to a partition!
[4220132.312205] grub-probe: sending ioctl 1261 to a partition!
[4220132.312207] grub-probe: sending ioctl 1261 to a partition!
[4220132.312830] grub-probe: sending ioctl 1261 to a partition!
[4220132.312833] grub-probe: sending ioctl 1261 to a partition!
[4220132.324213] grub-probe: sending ioctl 1261 to a partition!
[4220132.324215] grub-probe: sending ioctl 1261 to a partition!
[4220132.347423] grub-probe: sending ioctl 1261 to a partition!
[4220132.347426] grub-probe: sending ioctl 1261 to a partition!
[4220137.379886] scsi_verify_blk_ioctl: 120 callbacks suppressed
[4220137.379889] grub-probe: sending ioctl 1261 to a partition!
[4220137.379891] grub-probe: sending ioctl 1261 to a partition!
[4220137.380395] grub-probe: sending ioctl 1261 to a partition!
[4220137.380398] grub-probe: sending ioctl 1261 to a partition!
[4220137.380882] grub-probe: sending ioctl 1261 to a partition!
[4220137.380884] grub-probe: sending ioctl 1261 to a partition!
[4220137.381587] grub-probe: sending ioctl 1261 to a partition!
[4220137.381589] grub-probe: sending ioctl 1261 to a partition!
[4220137.399401] grub-probe: sending ioctl 1261 to a partition!
[4220137.399405] grub-probe: sending ioctl 1261 to a partition!
[4460682.812562] tapbr: port 1(tap0) entering forwarding state
[4460682.812575] tapbr: port 1(tap0) entering forwarding state
[4460685.816011] tapbr: port 1(tap0) entering forwarding state
[4460854.212977] tapbr: port 1(tap0) entering forwarding state
[4460926.592535] tapbr: port 1(tap0) entering forwarding state
[4460926.592547] tapbr: port 1(tap0) entering forwarding state
[4460929.600008] tapbr: port 1(tap0) entering forwarding state
[4461047.275770] tapbr: port 1(tap0) entering forwarding state
[4461049.896543] tapbr: port 1(tap0) entering forwarding state
[4461049.896555] tapbr: port 1(tap0) entering forwarding state
[4461052.904010] tapbr: port 1(tap0) entering forwarding state
[4461056.035874] tapbr: port 1(tap0) entering forwarding state
[4461058.868558] tapbr: port 1(tap0) entering forwarding state
[4461058.868571] tapbr: port 1(tap0) entering forwarding state
[4461061.872011] tapbr: port 1(tap0) entering forwarding state
[4462488.005916] tapbr: port 1(tap0) entering forwarding state
[4463799.180697] tapbr: port 1(tap0) entering forwarding state
[4463799.180712] tapbr: port 1(tap0) entering forwarding state
[4463802.184009] tapbr: port 1(tap0) entering forwarding state
[4464202.184112] tapbr: port 1(tap0) entering forwarding state
[4467541.693297] tapbr: port 1(tap0) entering forwarding state
[4467541.693310] tapbr: port 1(tap0) entering forwarding state
[4467544.696010] tapbr: port 1(tap0) entering forwarding state
[4467930.476792] tapbr: port 1(tap0) entering forwarding state
[4468139.324574] tapbr: port 1(tap0) entering forwarding state
[4468139.324586] tapbr: port 1(tap0) entering forwarding state
[4468142.328011] tapbr: port 1(tap0) entering forwarding state
[4468166.245722] tapbr: port 1(tap0) entering forwarding state
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 960
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0Y958C
board_version: A00
** Loaded modules:
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
udf
crc_itu_t
nls_iso8859_1
nls_cp437
vfat
fat
squashfs
isofs
des_generic
ecb
md4
hmac
nls_utf8
cifs
fscache
dm_mod
uinput
binfmt_misc
pci_stub
bridge
stp
xt_tcpudp
xt_conntrack
xt_state
xt_dscp
xt_DSCP
xt_CLASSIFY
ipt_LOG
ipt_REJECT
xt_owner
nf_conntrack_tftp
nf_nat_ftp
nf_conntrack_ftp
nf_nat_sip
nf_conntrack_sip
nf_nat_h323
nf_conntrack_h323
nf_nat_pptp
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_nat_proto_gre
nf_nat_irc
nf_conntrack_irc
iptable_filter
iptable_nat
ipt_MASQUERADE
nf_nat
xt_multiport
xt_iprange
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
ip_tables
x_tables
tun
fuse
kvm_intel
kvm
snd_pcm_oss
snd_mixer_oss
coretemp
loop
snd_hda_codec_hdmi
snd_hda_codec_analog
dell_wmi
evdev
sparse_keymap
tpm_tis
tpm
tpm_bios
dcdbas
snd_seq
psmouse
snd_hda_intel
snd_seq_device
pcspkr
snd_hda_codec
snd_hwdep
snd_pcm
serio_raw
snd_timer
snd
i2c_i801
soundcore
snd_page_alloc
parport_pc
parport
wmi
processor
button
thermal_sys
ext3
jbd
mbcache
sg
sr_mod
cdrom
sd_mod
crc_t10dif
radeon
usbhid
hid
ttm
usb_storage
ahci
uas
uhci_hcd
libahci
ata_generic
drm_kms_helper
sata_sil24
drm
libata
i2c_algo_bit
i2c_core
power_supply
ehci_hcd
scsi_mod
e1000e
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset
HECI Controller [8086:2e14] (rev 03)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER
Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT
Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at febd8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at febd9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at febda000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at febdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family)
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 49
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febdb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Redwood [Radeon
HD 5670] [1002:68d8] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at dc00 [size=256]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc Redwood HDMI Audio [Radeon HD
5600 Series] [1002:aa60]
Subsystem: PC Partner Limited Device [174b:aa60]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 52
Region 0: Memory at fe9dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3531
[SATALink/SATARaid] Serial ATA Controller [1095:3531] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA
Controller [1095:3531]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe7fd000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at fe7fe000 (64-bit, non-prefetchable) [size=8K]
Region 4: I/O ports at cc80 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 098: ID 046d:c063 Logitech, Inc. DELL Laser Mouse
Bus 003 Device 097: ID 04b3:301b IBM Corp. SK-8815 Keyboard
Bus 003 Device 096: ID 04b3:301a IBM Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 012: ID 5678:1234
Bus 002 Device 004: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader
CA200/B/S
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 061: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers stable
APT policy: (900, 'stable'), (500, 'testing'), (410, 'unstable'), (200,
'experimental'), (111, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.101 generic modular initramfs generato
ii linux-base 3.5 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.2.0-1-amd64 suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-3.2 <none> (no description available)
Versions of packages linux-image-3.2.0-1-amd64 is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.35 Binary firmware for various driver
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-1-amd64/postinst/depmod-error-initrd-3.2.0-1-amd64: false
linux-image-3.2.0-1-amd64/postinst/missing-firmware-3.2.0-1-amd64:
linux-image-3.2.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-amd64/prerm/removing-running-kernel-3.2.0-1-amd64: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120326135330.30601.71715.report...@optiplex960.ruk.cuni.cz
