Package: linux-2.6 Version: 2.6.32-41 Severity: normal
When using some CDs there are "Unhandled sense code" messges for the device. This leads to Plasma's autodetection of the device to fail and does not display the device. There is a very good chance the CD can still be mounted manually. I am opening this report, because in #583949 Ben Hutchings recommend it. Also because I believe this is related to software somehow and not gone. It probably will take some effort by the Debian, kernel and Free Software communities to get a closer grip on this defect. Any hints towards further analysis are highly appreciated! Bernhard Details: I have two drives available for the testing on an amd machine, running an amd kernel with 32bit userspace. One drive is build in, the other is usb. Both show the symptoms. If I have a CD that is affected, it will have problems in both drives. Booting into windows XP, there is no issue. Running grml96_2011.12.iso from an usb stick there is no issue, it has linux-image-3.1.0-3-grml-amd64, but has not autodetection anyway. The symptoms: Putting the CD in the drive, it will take some time, more than usual a few seconds more. Then the syslog shows a number of blocks like: sr 6:0:0:0: [sr1] Unhandled sense code sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 6:0:0:0: [sr1] Sense Key : Medium Error [current] sr 6:0:0:0: [sr1] Add. Sense: L-EC uncorrectable error sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 02 55 a0 00 00 02 00 00 00 end_request: I/O error, dev sr1, sector 611968 Buffer I/O error on device sr1, logical block 76496 sr 6:0:0:0: [sr1] Unhandled sense code sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 6:0:0:0: [sr1] Sense Key : Medium Error [current] sr 6:0:0:0: [sr1] Add. Sense: L-EC uncorrectable error sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 02 55 a0 00 00 02 00 00 00 end_request: I/O error, dev sr1, sector 611968 Buffer I/O error on device sr1, logical block 76496 Maybe 3 or more. No device appears in the Plasma gui. A manual "mount /mnt/cdrom" usually succeeds. Expected would be that there are no messages and the device is coming up (fast) in the gui and can be mounted from there. Further details: I had problems with burned CDs from both drives. However it is also possible to burn CDs which are accepted fine (which I did today twice). It is unclear which CDs have this issue. And it is strange that the data can still be read manually and read by windows xp. I've tried linux-image-3.2.0-0.bpo.1-amd64 (3.2.4-1~bpo60+1 Debian Backports:squeeze-backports) which did not help. Given the number of issues that are related to this, it seems less likely that I really got unlucky with a number of suboptimal CD media. Even if so, there still is an issue as windows XP and manual mount read the CD fine. Infos about the two drives: cdrdao drive-info --device /dev/sr0 Cdrdao version 1.2.3 - (C) Andreas Mueller <andr...@daneb.de> /dev/sr0: TSSTcorp CDDVDW SH-S203D Rev: SB00 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) Maximum reading speed: 8468 kB/s Current reading speed: 8468 kB/s Maximum writing speed: 8468 kB/s Current writing speed: 8468 kB/s BurnProof supported: yes JustLink supported: yes JustSpeed supported: no cdrdao drive-info --device /dev/sr1 Cdrdao version 1.2.3 - (C) Andreas Mueller <andr...@daneb.de> /dev/sr1: TSSTcorp CDDVDW SE-S204N Rev: TS00 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) Maximum reading speed: 8468 kB/s Current reading speed: 8468 kB/s Maximum writing speed: 8468 kB/s Current writing speed: 8468 kB/s BurnProof supported: yes JustLink supported: yes JustSpeed supported: no Here are related issue reports: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=583949 2.6.32-3-amd64 can't read DVDs/CDs (sometimes) From: Ben Hutchings <b...@decadent.org.uk> If anyone is still having trouble reading CDs or DVDs in the current kernel version in stable (2.6.32-35) or unstable (3.0.0-1), please open a *new* bug report. There is a new one: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641288 (linux-image-2.6.32-5-686: Can not read appendable cdroms/dvds) Though it is unsure if this is the same issue as appendable CDs are addressed in particular. http://forum.kde.org/viewtopic.php?f=19&t=91402# CD Dvd drive not working in KDE 4.5.x The solution here seems to have been to disable some sort of autodetection. http://www.linuxquestions.org/questions/slackware-14/slackware64-current-doesnt-read-cd-r-disks-as-well-as-slack-12-1-does-801015/ http://www.linuxquestions.org/questions/slackware-14/cd-mounting-errors-iso9660-812240/page3.html http://www.linuxquestions.org/questions/slackware-14/slack-13-1-does-not-recognize-mounted-cd-810509/ -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 17:15:00 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=9a88ef7c-9a1f-4436-9f31-a77a9725cd3d ro quiet ** Not tainted ** Kernel log: ** Model information sys_vendor: MICRO-STAR INTERANTIONAL CO.,LTD product_name: MS-7368 product_version: 1.0 chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: V1.5 board_vendor: MICRO-STAR INTERANTIONAL CO.,LTD board_name: MS-7368 board_version: 1.0 ** Loaded modules: Module Size Used by isofs 27432 0 ip6table_filter 2384 0 ip6_tables 14883 1 ip6table_filter iptable_filter 2258 0 ip_tables 13691 1 iptable_filter ebtable_nat 1588 0 ebtables 13901 1 ebtable_nat x_tables 12685 3 ip6_tables,ip_tables,ebtables kvm_amd 31862 0 kvm 214152 1 kvm_amd fuse 50732 1 nls_utf8 1208 1 nls_cp437 5817 1 vfat 7836 1 fat 39990 1 vfat xfs 434953 5 exportfs 3122 1 xfs snd_hda_codec_atihdmi 2251 1 snd_hda_codec_realtek 235218 1 snd_hda_intel 20035 2 snd_hda_codec 53892 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5220 1 snd_hda_codec snd_pcm_oss 32415 0 snd_mixer_oss 12478 1 snd_pcm_oss snd_pcm 60151 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4256 0 snd_rawmidi 15323 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 41281 2 snd_seq_midi,snd_seq_midi_event snd_timer 15502 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq radeon 574492 2 ttm 40162 1 radeon snd 45998 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device drm_kms_helper 20289 1 radeon i2c_piix4 8328 0 soundcore 4566 1 snd drm 141911 4 radeon,ttm,drm_kms_helper i2c_algo_bit 4209 1 radeon snd_page_alloc 6217 2 snd_hda_intel,snd_pcm i2c_core 15451 5 radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit psmouse 49937 0 processor 29871 0 k8temp 3283 0 serio_raw 3752 0 pcspkr 1699 0 edac_core 29197 0 hid_apple 4594 0 evdev 7352 10 edac_mce_amd 6433 0 button 4650 0 usbhid 33276 0 hid 63209 2 hid_apple,usbhid ext3 106534 1 jbd 37077 1 ext3 mbcache 5050 1 ext3 dm_mod 53594 20 usb_storage 40121 0 sg 23893 0 sd_mod 29713 5 crc_t10dif 1276 1 sd_mod sr_mod 12250 0 cdrom 28631 1 sr_mod ata_generic 3239 0 ohci_hcd 19343 0 ahci 32822 4 firewire_ohci 19628 0 firewire_core 36704 1 firewire_ohci r8169 36840 0 crc_itu_t 1307 1 firewire_core mii 3210 1 r8169 pata_atiixp 3489 0 thermal 11610 0 thermal_sys 11942 2 processor,thermal ehci_hcd 32081 0 libata 133264 3 ata_generic,ahci,pata_atiixp usbcore 122834 5 usbhid,usb_storage,ohci_hcd,ehci_hcd nls_base 6377 6 isofs,nls_utf8,nls_cp437,vfat,fat,usbcore scsi_mod 126261 5 usb_storage,sg,sd_mod,sr_mod,libata ** Network interface configuration: ** Network status: *** IP interfaces and addresses: *** Device statistics: *** Protocol statistics: ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: ATI Technologies Inc RS690 Host Bridge [1002:7910] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at a000 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7000 [size=16] Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Micro-Star International Co., Ltd. Device [1462:7368] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp ** USB devices: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 13fd:2040 Initio Corporation Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.4 APT prefers stable APT policy: (550, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs ii linux-base 3.4~bpo60+1 Linux image base package ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-41 Binary firmware for various driver ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-amd64 suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa Versions of packages linux-image-2.6.32-5-amd64 is related to: ii firmware-linux 0.28+squeeze1 Binary firmware for various driver ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver -- debconf information: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true * linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120302163502.3224.25392.reportbug@localhost.localdomain
