I've seen what looks like the same issue on my Guruplug. linux-image-3.1.0-1-kirkwood (3.1.8-2) boots fine, linux-image-3.2.0-1-kirkwood (3.2.2-1) doesn't get anywhere.
My U-boot banner looks like this: ---- U-Boot 2011.03 (Apr 26 2011 - 21:35:00) Marvell-GuruPlug SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0, egiga1 88E1121 Initialized on egiga0 88E1121 Initialized on egiga1 ---- And when I boot 3.2.0-1, this is what I see: ---- Loading file "/uImage.bak" from ide device 0:1 (hda1) 1570456 bytes read Loading file "/uInitrd.bak" from ide device 0:1 (hda1) 8211832 bytes read Marvell>> bootm 0x00800000 0x01100000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Debian kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1570392 Bytes = 1.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: Debian ramdisk Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 8211768 Bytes = 7.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ---- After this, no more messages are visible on the serial console, and there is no other indication that the boot progresses. Thanks donald -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAK+uisC1qsj-BjrrUCWFtTgd=-Z51gN6LaQU1T=cnnzsi30...@mail.gmail.com
