Package: linux-2.6 Version: 2.6.32-38 Severity: normal Running the par2 program causes a bad pagetable fault which has killed the process and killed the machine on two different occasions. The machine is completely stable running other programs.
The problem occurs when running par2 to generate 13.5GB of recovery data for 50GB of data in eleven equal size files, a task that should take about 10 hours on my system. The task seems to cause a crash after about two hours. I understand that it is possible that the problem is in the hardware, but it seems unlikely given how stable the machine is otherwise. Relevant parts of /var/log/messages are: Dec 14 16:09:46 mergle kernel: [3176209.061603] PGD 57069067 PUD 374b0067 PMD 67b9f067 PTE ffaca00076ac0067 Dec 14 16:09:46 mergle kernel: [3176209.061616] CPU 0 Dec 14 16:09:46 mergle kernel: [3176209.061619] Modules linked in: isofs rfcomm nls_utf8 nls_cp437 vfat fat tcp_diag inet_diag fuse sco bridge stp bnep l2cap crc16 bluetooth rfkill binfmt_misc act_police sch_ingress cls_u32 sch_sfq sch_cbq ipt_REJECT xt_tcpudp xt_state ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc hwmon_vid eeprom psmouse ide_generic ide_gd_mod ide_cd_mod ide_core snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_intel8x0 snd_pcm_oss snd_ac97_codec ac97_bus snd_util_mem snd_mixer_oss snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq i2c_ali15x3 emu10k1_gp snd_timer snd_seq_device i2c_ali1535 i2c_ali1563 gameport snd i2c_core shpchp k8temp soundcore snd_page_alloc pci_hotplug edac_core edac_mce_amd parport_pc parp ort evdev pcspkr button processor ex Dec 14 16:09:46 mergle kernel: 3 jbd mbcache raid1 md_mod sg sr_mod cdrom sd_mod crc_t10dif usbhid ata_generic hid usb_storage pata_ali ohci_hcd fan 8139too sata_uli 8139cp libata floppy mii thermal thermal_sys ne2k_pci 8390 ehci_hcd scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan] Dec 14 16:09:46 mergle kernel: [3176209.061716] Pid: 8900, comm: par2 Not tainted 2.6.32-5-amd64 #1 Dec 14 16:09:46 mergle kernel: [3176209.061718] RIP: 0033:[<00007f7abfda9868>] [<00007f7abfda9868>] 0x7f7abfda9868 Dec 14 16:09:46 mergle kernel: [3176209.061728] RSP: 002b:00007fffdceb9428 EFLAGS: 00010203 Dec 14 16:09:46 mergle kernel: [3176209.061730] RAX: 00007f7aa0780010 RBX: 00000000001aaaa8 RCX: 00000000001a65d9 Dec 14 16:09:46 mergle kernel: [3176209.061733] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f7ab2850f90 Dec 14 16:09:46 mergle kernel: [3176209.061735] RBP: 000000000134b8d0 R08: 000000001f37fce0 R09: 0000000000080000 Dec 14 16:09:46 mergle kernel: [3176209.061738] R10: 0000000000000000 R11: 00007f7abfda9710 R12: 00007fffdceb94d0 Dec 14 16:09:46 mergle kernel: [3176209.061741] R13: 0000000000000008 R14: 00000000001aaaa8 R15: 00007fffdceb94c0 Dec 14 16:09:46 mergle kernel: [3176209.061744] FS: 00007f7ac0a27720(0000) GS:ffff880001800000(0000) knlGS:0000000000000000 Dec 14 16:09:46 mergle kernel: [3176209.061746] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Dec 14 16:09:46 mergle kernel: [3176209.061749] CR2: 00007f7ab2851000 CR3: 000000002dac7000 CR4: 00000000000006f0 Dec 14 16:09:46 mergle kernel: [3176209.061752] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Dec 14 16:09:46 mergle kernel: [3176209.061754] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Dec 14 16:09:46 mergle kernel: [3176209.061757] Process par2 (pid: 8900, threadinfo ffff880067b9c000, task ffff880037ab3170) Dec 14 16:09:46 mergle kernel: [3176209.061759] Dec 14 16:09:46 mergle kernel: [3176209.061765] RSP <00007fffdceb9428> Dec 14 16:09:46 mergle kernel: [3176209.061768] ---[ end trace 6813b63f9aac1faf ]--- Thanks, Matthew -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=12269971-1ece-414d-9a32-b0615fd1048c ro console=tty0 quiet ** Not tainted ** Kernel log: [ 7.088781] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5 [ 7.088785] ACPI: Sleep Button [SLPF] [ 7.787807] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 7.797483] usb-storage: device scan complete [ 7.797972] scsi 4:0:0:0: Direct-Access Sony PRS-300 1000 PQ: 0 ANSI: 2 [ 7.798453] scsi 4:0:0:1: Direct-Access Sony PRS-300 Launcher 1000 PQ: 0 ANSI: 2 [ 7.800274] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 7.800939] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 7.810858] sd 4:0:0:0: [sdd] 908544 512-byte logical blocks: (465 MB/443 MiB) [ 7.832276] parport_pc 00:09: reported by Plug and Play ACPI [ 7.832324] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.834024] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.901436] sd 4:0:0:0: [sdd] Write Protect is off [ 7.901441] sd 4:0:0:0: [sdd] Mode Sense: 0f 00 00 00 [ 7.901444] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 7.902333] sd 4:0:0:1: [sde] 20480 512-byte logical blocks: (10.4 MB/10.0 MiB) [ 7.928120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.001426] sd 4:0:0:1: [sde] Write Protect is on [ 8.001431] sd 4:0:0:1: [sde] Mode Sense: 0f 00 80 00 [ 8.001434] sd 4:0:0:1: [sde] Assuming drive cache: write through [ 8.073860] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 8.073866] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted. [ 8.101403] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 8.101464] sdd: [ 8.201385] sd 4:0:0:1: [sde] Assuming drive cache: write through [ 8.201445] sde: [ 8.301371] sd 4:0:0:0: [sdd] Assuming drive cache: write through [ 8.301432] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 8.304742] sd 4:0:0:1: [sde] Assuming drive cache: write through [ 8.304797] sd 4:0:0:1: [sde] Attached SCSI removable disk [ 8.315199] udev[474]: renamed network interface eth1 to eth1-eth0 [ 8.315820] udev[480]: renamed network interface eth0 to eth2 [ 8.325730] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x5000 [ 8.326382] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 8.326467] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted. [ 8.365929] udev[474]: renamed network interface eth1-eth0 to eth0 [ 8.375653] EDAC MC: Ver: 2.1.0 Oct 3 2011 [ 8.461409] alim7101_wdt: Steve Hill <st...@navaho.co.uk>. [ 8.461423] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set [ 8.467354] EDAC amd64_edac: Ver: 3.2.0 Oct 3 2011 [ 8.469744] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.469755] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.469757] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.469758] (Note that use of the override may cause unknown side effects.) [ 8.469788] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.522128] gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xed00, speed 1115kHz [ 9.046273] Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.052150] EMU10K1_Audigy 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.068010] AC'97 1 does not respond - RESET [ 10.068471] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 10.068532] Unable to initialize codec #1 [ 10.124018] intel8x0_measure_ac97_clock: measured 54969 usecs (2648 samples) [ 10.124021] intel8x0: clocking to 48000 [ 10.836119] Adding 1028152k swap on /dev/sda2. Priority:-1 extents:1 across:1028152k [ 11.249870] EXT3 FS on sda5, internal journal [ 11.459644] Uniform Multi-Platform E-IDE driver [ 11.464533] ide-cd driver 5.00 [ 11.470285] ide-gd driver 1.18 [ 11.473030] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 11.631754] w83627ehf: Found W83627EHG chip at 0x290 [ 11.631915] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 11.631994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.403054] md: resync of RAID array md127 [ 16.403059] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 16.403061] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 16.403066] md: using 128k window, over a total of 1932525504 blocks. [ 19.243468] fuse init (API version 7.13) [ 19.660811] kjournald starting. Commit interval 5 seconds [ 19.661124] EXT3 FS on sda4, internal journal [ 19.661130] EXT3-fs: mounted filesystem with ordered data mode. [ 19.696827] kjournald starting. Commit interval 5 seconds [ 19.696972] EXT3 FS on sda6, internal journal [ 19.696977] EXT3-fs: mounted filesystem with ordered data mode. [ 19.707385] kjournald starting. Commit interval 5 seconds [ 19.707510] EXT3 FS on sda7, internal journal [ 19.707514] EXT3-fs: mounted filesystem with ordered data mode. [ 19.834430] kjournald starting. Commit interval 5 seconds [ 19.837228] EXT3 FS on md127, internal journal [ 19.837233] EXT3-fs: mounted filesystem with ordered data mode. [ 22.304636] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 27.979015] RPC: Registered udp transport module. [ 27.979018] RPC: Registered tcp transport module. [ 27.979021] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 28.030054] Slow work thread pool: Starting up [ 28.030128] Slow work thread pool: Ready [ 28.030206] FS-Cache: Loaded [ 28.114099] FS-Cache: Netfs 'nfs' registered for caching [ 28.189393] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 29.659739] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 29.659759] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 29.659760] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 30.580351] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.637307] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 30.637994] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 30.637997] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 30.637999] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 65.972893] u32 classifier [ 65.972897] Performance counters on [ 65.972898] input device check on [ 65.972900] Actions configured ** Model information sys_vendor: product_name: product_version: chassis_vendor: chassis_version: bios_vendor: Phoenix Technologies, LTD bios_version: 6.00 PG board_vendor: http://www.abit.com.tw/ board_name: UL8 (ULI M1689) board_version: 1.x ** Loaded modules: Module Size Used by tcp_diag 880 0 inet_diag 6914 5 tcp_diag binfmt_misc 6431 1 act_police 3636 1 sch_ingress 1624 1 cls_u32 5466 7 sch_sfq 4686 3 sch_cbq 13771 1 ipt_REJECT 1953 2 xt_tcpudp 2319 11 xt_state 1303 2 ipt_MASQUERADE 1554 1 iptable_nat 4299 1 nf_nat 13388 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 9833 5 iptable_nat,nf_nat nf_conntrack 46535 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 iptable_filter 2258 1 ip_tables 13915 2 iptable_nat,iptable_filter x_tables 12845 6 ipt_REJECT,xt_tcpudp,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables cpufreq_userspace 1992 0 cpufreq_stats 2740 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 nfsd 254782 2 exportfs 3170 1 nfsd nfs 241226 0 lockd 57619 2 nfsd,nfs fscache 29834 1 nfs nfs_acl 2031 2 nfsd,nfs auth_rpcgss 33508 2 nfsd,nfs sunrpc 161589 6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss fuse 50924 1 hwmon_vid 1828 0 eeprom 3337 0 psmouse 49937 0 ide_generic 1121 0 [permanent] ide_gd_mod 20433 0 ide_cd_mod 24744 0 ide_core 71722 3 ide_generic,ide_gd_mod,ide_cd_mod snd_emu10k1_synth 4840 0 snd_emux_synth 25538 1 snd_emu10k1_synth snd_seq_virmidi 3787 1 snd_emux_synth snd_seq_midi_emul 4165 1 snd_emux_synth snd_emu10k1 123628 1 snd_emu10k1_synth snd_intel8x0 24218 0 snd_ac97_codec 99186 2 snd_emu10k1,snd_intel8x0 ac97_bus 1086 1 snd_ac97_codec snd_pcm_oss 32607 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi snd_pcm 60487 4 snd_emu10k1,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi_event 4628 2 snd_seq_virmidi,snd_seq_midi snd_util_mem 2064 2 snd_emux_synth,snd_emu10k1 emu10k1_gp 1734 0 snd_seq 42881 5 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event snd_hwdep 5380 2 snd_emux_synth,snd_emu10k1 snd_timer 15598 3 snd_emu10k1,snd_pcm,snd_seq snd_seq_device 4493 5 snd_emu10k1_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq gameport 7416 2 emu10k1_gp snd 46526 13 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_hwdep,snd_timer,snd_seq_device soundcore 4598 1 snd edac_core 29261 0 i2c_ali15x3 5114 0 i2c_ali1563 5282 0 snd_page_alloc 6249 3 snd_emu10k1,snd_intel8x0,snd_pcm edac_mce_amd 6433 0 i2c_ali1535 4890 0 k8temp 3283 0 i2c_core 15819 4 eeprom,i2c_ali15x3,i2c_ali1563,i2c_ali1535 shpchp 26264 0 pci_hotplug 21587 1 shpchp parport_pc 18855 0 evdev 7352 10 pcspkr 1699 0 parport 27954 1 parport_pc button 4650 0 processor 29935 0 ext3 106710 5 jbd 37221 1 ext3 mbcache 5050 1 ext3 raid1 18431 1 md_mod 73872 2 raid1 sg 24069 0 usbhid 33292 0 usb_storage 40057 0 hid 63257 1 usbhid sd_mod 29921 10 crc_t10dif 1276 1 sd_mod sr_mod 12602 0 cdrom 29415 2 ide_cd_mod,sr_mod 8139too 17981 0 ata_generic 3239 0 ohci_hcd 19343 0 fan 3346 0 8139cp 15941 0 sata_uli 3017 2 ehci_hcd 32081 0 ne2k_pci 6191 0 floppy 49087 0 8390 6544 1 ne2k_pci mii 3210 2 8139too,8139cp pata_ali 8775 5 libata 133776 3 ata_generic,sata_uli,pata_ali usbcore 122674 5 usbhid,usb_storage,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 126533 5 sg,usb_storage,sd_mod,sr_mod,libata thermal 11674 0 thermal_sys 11942 3 processor,fan,thermal ** PCI devices: 00:00.0 Host bridge [0600]: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip] [10b9:1689] Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at <ignored> (32-bit, prefetchable) Capabilities: <access denied> Kernel driver in use: agpgart-amd64 00:01.0 PCI bridge [0604]: ALi Corporation AGP8X Controller [10b9:5246] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fb000000-fcffffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:02.0 PCI bridge [0604]: ALi Corporation M5249 HTT to PCI Bridge [10b9:5249] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: fde00000-fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:03.0 ISA bridge [0601]: ALi Corporation M1563 HyperTransport South Bridge [10b9:1563] (rev 70) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 6000ns max) Kernel driver in use: ali1563_smbus 00:03.1 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:04.0 Multimedia audio controller [0401]: ALi Corporation M5455 PCI AC-Link Controller Audio Device [10b9:5455] (rev 20) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at f800 [size=256] Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:0e.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c7) (prog-if fa) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: pata_ali 00:0e.1 IDE interface [0101]: ALi Corporation ULi 5289 SATA [10b9:5289] (rev 10) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fd00 [size=4] Region 2: I/O ports at fc00 [size=8] Region 3: I/O ports at fb00 [size=4] Region 4: I/O ports at fa00 [size=16] Kernel driver in use: sata_uli 00:0f.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:0f.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:0f.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:0f.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller [10b9:5239] (rev 01) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp. Device [147b:2207] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 48 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at fdffb000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11DDR [GeForce2 MX200] [10de:0111] (rev b2) (prog-if 00 [VGA controller]) Subsystem: ABIT Computer Corp. Device [147b:6107] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 7 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M] [virtual] Expansion ROM at fc000000 [disabled] [size=64K] Capabilities: <access denied> 02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ea00 [size=256] Region 1: Memory at fddff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too 02:07.0 Ethernet controller [0200]: VIA Technologies, Inc. VT82C926 [Amazon] [1106:0926] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at ef00 [size=32] Kernel driver in use: ne2k-pci 02:09.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 07) Subsystem: Creative Labs SBLive! 5.1 Model SB0100 [1102:8064] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at ee00 [size=32] Capabilities: <access denied> Kernel driver in use: EMU10K1_Audigy 02:09.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 07) Subsystem: Creative Labs Gameport Joystick [1102:0020] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: I/O ports at ed00 [size=8] Capabilities: <access denied> Kernel driver in use: Emu10k1_gameport ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 054c:031e Sony Corp. PRS-300/PRS-505 eBook reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-38 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-38 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111214225312.3346.43390.reportbug@localhost.localdomain
