On Fri, Dec 02, 2011 at 06:33:31PM -0600, Jonathan Nieder wrote: > Tzafrir Cohen wrote: > > > The system does not freeze on a 'modprobe viafb'. It merely blanks the > > screen. If I disable loading this module, I will basically load. The > > system will still hang at random a while later (several hours? more?). > > Odd. The viafb problem is probably worth investigating, but let's take > care of the hangs first. > > Please attach full "dmesg" output from booting without the viafb module.
Attached. There fas an fsck which has delayed the boot. sdb is a card readers, and is empty. > > Not sure what else to suggest. Does the nosmp (i.e., the -486) kernel > behave differently? Did this system work well with lenny before? If > so, could you try e.g. a lenny live cd to check if it still does? I built custom kernels with SMP disabled and CPU set to VIA C7 and they did not work any better. I'm not exactly sure what would "upstream" be. Here's what I tried: http://wiki.openchrome.org/pipermail/openchrome-users/2011-November/006799.html http://wiki.openchrome.org/pipermail/openchrome-users/2011-December/thread.html#6809 -- Tzafrir Cohen | tzaf...@jabber.org | VIM is http://tzafrir.org.il | | a Mutt's tzaf...@cohens.org.il | | best tzaf...@debian.org | | friend
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (b...@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bee0000 (usable) [ 0.000000] BIOS-e820: 000000003bee0000 - 000000003beea000 (ACPI data) [ 0.000000] BIOS-e820: 000000003beea000 - 000000003bf00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: VIA/Phoenix CX700/VIA Demo Board, BIOS 6.00 06/13/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3bee0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03BF00000 mask FFFF00000 uncachable [ 0.000000] 2 base 03C000000 mask FFC000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f84b0] f84b0 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 36c90000 - 37640000 [ 0.000000] ACPI: RSDP 000f8470 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3bee56a8 00034 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3bee9a46 00074 (v01 CX700 PTLTW 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 3bee56dc 0436A (v01 VIA PTL_ACPI 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3beeafc0 00040 [ 0.000000] ACPI: SSDT 3bee9aba 004BA (v01 PPmmRe PPm 06040000 INTL 20030224) [ 0.000000] ACPI: APIC 3bee9f74 00050 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: MCFG 3bee9fc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 68MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0003bee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0003bee0 [ 0.000000] On node 0 totalpages: 245357 [ 0.000000] free_area_init_node: node 0, pgdat c1436800, node_mem_map f6510200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 138 pages used for memmap [ 0.000000] HighMem zone: 17496 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s31744 r0 d21504 u2097152 [ 0.000000] pcpu-alloc: s31744 r0 d21504 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243439 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=68486314-a888-42c0-907a-672a1aa79782 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0003bee0) [ 0.000000] Memory: 957564k/981888k available (2765k kernel code, 23864k reserved, 1578k data, 404k init, 70536k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc143e000 - 0xc14a3000 ( 404 kB) [ 0.000000] .data : 0xc12b34ec - 0xc143dec0 (1578 kB) [ 0.000000] .text : 0xc1000000 - 0xc12b34ec (2765 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 599.987 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1199.97 BogoMIPS (lpj=2399948) [ 0.004034] pid_max: default: 32768 minimum: 301 [ 0.004301] Security Framework initialized [ 0.004438] Mount-cache hash table entries: 512 [ 0.009710] Initializing cgroup subsys cpuacct [ 0.009910] Initializing cgroup subsys memory [ 0.010004] Initializing cgroup subsys devices [ 0.010018] Initializing cgroup subsys freezer [ 0.010032] Initializing cgroup subsys net_cls [ 0.010044] Initializing cgroup subsys blkio [ 0.010335] SMP alternatives: switching to UP code [ 0.026877] Freeing SMP alternatives: 8k freed [ 0.026910] ACPI: Core revision 20110623 [ 0.036219] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036653] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.040002] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.040002] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.040002] ..... (found apic 0 pin 0) ... [ 0.082239] ....... works. [ 0.082248] CPU0: Centaur VIA C7-M Processor 1200MHz stepping 00 [ 0.084014] Performance Events: [ 0.084807] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.084890] Brought up 1 CPUs [ 0.084904] Total of 1 processors activated (1199.97 BogoMIPS). [ 0.087962] devtmpfs: initialized [ 0.089060] PM: Registering ACPI NVS region at 3beea000 (90112 bytes) [ 0.090110] print_constraints: dummy: [ 0.090517] NET: Registered protocol family 16 [ 0.090977] ACPI: bus type pci registered [ 0.091790] PCI: MMCONFIG for domain 0000 [bus 03-03] at [mem 0xe0300000-0xe03fffff] (base 0xe0000000) [ 0.091811] PCI: MMCONFIG at [mem 0xe0300000-0xe03fffff] reserved in E820 [ 0.091824] PCI: Using MMCONFIG for extended config space [ 0.091837] PCI: Using configuration type 1 for base access [ 0.094944] bio: create slab <bio-0> at 0 [ 0.095538] ACPI: Added _OSI(Module Device) [ 0.095552] ACPI: Added _OSI(Processor Device) [ 0.095565] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.095579] ACPI: Added _OSI(Processor Aggregator Device) [ 0.098018] ACPI: EC: Look up EC in DSDT [ 0.103925] ACPI: Actual Package length (8) is larger than NumElements field (5), truncated [ 0.103949] [ 0.104388] ACPI: Actual Package length (8) is larger than NumElements field (5), truncated [ 0.104409] [ 0.104824] ACPI: Actual Package length (8) is larger than NumElements field (5), truncated [ 0.104845] [ 0.115647] ACPI: Interpreter enabled [ 0.115669] ACPI: (supports S0 S3 S4 S5) [ 0.115749] ACPI: Using IOAPIC for interrupt routing [ 0.135844] ACPI: Power Resource [PFN0] (off) [ 0.136081] ACPI: Power Resource [PFN1] (off) [ 0.137650] ACPI: No dock devices found. [ 0.137662] HEST: Table not found. [ 0.137682] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.137969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.138553] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.138572] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.138591] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.138610] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.138628] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.138647] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.138666] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.138685] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] [ 0.138704] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.138746] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd5ff]) [ 0.138813] pci 0000:00:00.0: [1106:0324] type 0 class 0x000600 [ 0.138847] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.138983] pci 0000:00:00.1: [1106:1324] type 0 class 0x000600 [ 0.139083] pci 0000:00:00.2: [1106:2324] type 0 class 0x000600 [ 0.139179] pci 0000:00:00.3: [1106:3324] type 0 class 0x000600 [ 0.139293] pci 0000:00:00.4: [1106:4324] type 0 class 0x000600 [ 0.139392] pci 0000:00:00.7: [1106:7324] type 0 class 0x000600 [ 0.139493] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604 [ 0.139566] pci 0000:00:01.0: supports D1 [ 0.139636] pci 0000:00:0f.0: [1106:0581] type 0 class 0x000101 [ 0.139713] pci 0000:00:0f.0: reg 20: [io 0x4460-0x446f] [ 0.139811] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.139886] pci 0000:00:10.0: reg 20: [io 0x4400-0x441f] [ 0.139944] pci 0000:00:10.0: supports D1 D2 [ 0.139959] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.139978] pci 0000:00:10.0: PME# disabled [ 0.140052] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.140127] pci 0000:00:10.1: reg 20: [io 0x4420-0x443f] [ 0.140185] pci 0000:00:10.1: supports D1 D2 [ 0.140200] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.140218] pci 0000:00:10.1: PME# disabled [ 0.140269] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 0.140344] pci 0000:00:10.2: reg 20: [io 0x4440-0x445f] [ 0.140401] pci 0000:00:10.2: supports D1 D2 [ 0.140416] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.140434] pci 0000:00:10.2: PME# disabled [ 0.140493] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 0.140533] pci 0000:00:10.4: reg 10: [mem 0xd1400000-0xd14000ff] [ 0.140635] pci 0000:00:10.4: supports D1 D2 [ 0.140650] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.140668] pci 0000:00:10.4: PME# disabled [ 0.140726] pci 0000:00:11.0: [1106:8324] type 0 class 0x000601 [ 0.140821] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.140902] pci 0000:00:11.7: [1106:324e] type 0 class 0x000600 [ 0.141008] pci 0000:00:13.0: [1106:324b] type 1 class 0x000604 [ 0.141088] pci 0000:00:13.1: [1106:324a] type 1 class 0x000604 [ 0.141241] pci 0000:01:00.0: [1106:3157] type 0 class 0x000300 [ 0.141280] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xbfffffff pref] [ 0.141308] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd0ffffff] [ 0.141372] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.141414] pci 0000:01:00.0: supports D1 D2 [ 0.141485] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.141507] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.141529] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref] [ 0.141600] pci 0000:02:01.0: [1106:3288] type 0 class 0x000403 [ 0.141637] pci 0000:02:01.0: reg 10: [mem 0xd1000000-0xd1003fff 64bit] [ 0.141727] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.141745] pci 0000:02:01.0: PME# disabled [ 0.141771] pci 0000:02:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.141839] pci 0000:00:13.0: PCI bridge to [bus 02-02] [ 0.141861] pci 0000:00:13.0: bridge window [mem 0xd1000000-0xd10fffff] [ 0.141947] pci 0000:03:09.0: [10ec:8139] type 0 class 0x000200 [ 0.141983] pci 0000:03:09.0: reg 10: [io 0x5000-0x50ff] [ 0.142011] pci 0000:03:09.0: reg 14: [mem 0xd1100000-0xd11000ff] [ 0.142098] pci 0000:03:09.0: supports D1 D2 [ 0.142113] pci 0000:03:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.142131] pci 0000:03:09.0: PME# disabled [ 0.142188] pci 0000:00:13.1: PCI bridge to [bus 03-03] [ 0.142207] pci 0000:00:13.1: bridge window [io 0x5000-0x5fff] [ 0.142226] pci 0000:00:13.1: bridge window [mem 0xd1100000-0xd11fffff] [ 0.142267] pci_bus 0000:00: on NUMA node 0 [ 0.142285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.142939] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT] [ 0.143385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT] [ 0.143629] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.143650] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.143665] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.162594] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled. [ 0.162814] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. [ 0.163025] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. [ 0.163219] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled. [ 0.163533] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *10 11 12) [ 0.163837] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11 12) [ 0.164157] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11 12) [ 0.164389] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *0, disabled. [ 0.164967] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.164988] vgaarb: loaded [ 0.164997] vgaarb: bridge control possible 0000:01:00.0 [ 0.165214] PCI: Using ACPI for IRQ routing [ 0.165233] PCI: pci_cache_line_size set to 64 bytes [ 0.165446] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.165463] reserve RAM buffer: 000000003bee0000 - 000000003bffffff [ 0.173559] pnp: PnP ACPI init [ 0.173633] ACPI: bus type pnp registered [ 0.173983] pnp 00:00: [bus 00-ff] [ 0.174000] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.174016] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.174033] pnp 00:00: [io 0x0d00-0xffff window] [ 0.174050] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.174067] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.174085] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.174102] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.174119] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.174137] pnp 00:00: [mem 0x40000000-0xdfffffff window] [ 0.174154] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.174398] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.175118] pnp 00:01: [dma 4] [ 0.175132] pnp 00:01: [io 0x0000-0x000f] [ 0.175148] pnp 00:01: [io 0x0081-0x008f] [ 0.175162] pnp 00:01: [io 0x00c0-0x00df] [ 0.175311] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.175427] pnp 00:02: [io 0x00f0-0x00ff] [ 0.175464] pnp 00:02: [irq 13] [ 0.175602] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.175723] pnp 00:03: [io 0x0070-0x0075] [ 0.175745] pnp 00:03: [irq 8] [ 0.175884] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.175961] pnp 00:04: [io 0x0061] [ 0.176145] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.176277] pnp 00:05: [mem 0x00000000-0x0009ffff] [ 0.176293] pnp 00:05: [mem 0x000e0000-0x000fffff] [ 0.176309] pnp 00:05: [mem 0xfff00000-0xffffffff] [ 0.176325] pnp 00:05: [mem 0xffee0000-0xffefffff] [ 0.176342] pnp 00:05: [mem 0xfec00000-0xfec0ffff] [ 0.176358] pnp 00:05: [mem 0xfee00000-0xfee0ffff] [ 0.176374] pnp 00:05: [mem 0xe0208000-0xe0208fff] [ 0.176655] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.176678] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.176701] system 00:05: [mem 0xfff00000-0xffffffff] could not be reserved [ 0.176723] system 00:05: [mem 0xffee0000-0xffefffff] has been reserved [ 0.176745] system 00:05: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.176766] system 00:05: [mem 0xfee00000-0xfee0ffff] could not be reserved [ 0.176788] system 00:05: [mem 0xe0208000-0xe0208fff] has been reserved [ 0.176808] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.177165] pnp 00:06: [io 0x0080] [ 0.177179] pnp 00:06: [io 0x0092] [ 0.177192] pnp 00:06: [io 0x00a8] [ 0.177206] pnp 00:06: [io 0x00a9] [ 0.177219] pnp 00:06: [io 0x0022] [ 0.177232] pnp 00:06: [io 0x002e] [ 0.177246] pnp 00:06: [io 0x002f] [ 0.177260] pnp 00:06: [io 0x0068-0x006f] [ 0.177275] pnp 00:06: [io 0x04d0-0x04d1] [ 0.177290] pnp 00:06: [io 0xfe10-0xfe11] [ 0.177304] pnp 00:06: [io 0xfe00] [ 0.177318] pnp 00:06: [io 0x4000-0x407f] [ 0.177332] pnp 00:06: [io 0x4100-0x411f] [ 0.177599] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.177620] system 00:06: [io 0xfe10-0xfe11] has been reserved [ 0.177639] system 00:06: [io 0xfe00] has been reserved [ 0.177658] system 00:06: [io 0x4000-0x407f] has been reserved [ 0.177677] system 00:06: [io 0x4100-0x411f] has been reserved [ 0.177697] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178865] pnp 00:07: [irq 12] [ 0.179032] pnp 00:07: Plug and Play ACPI device, IDs SYN0d05 SYN0d00 SYN0002 PNP0f13 (active) [ 0.179117] pnp 00:08: [io 0x0060] [ 0.179131] pnp 00:08: [io 0x0064] [ 0.179151] pnp 00:08: [irq 1] [ 0.179303] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP0320 (active) [ 0.181001] pnp: PnP ACPI: found 9 devices [ 0.181014] ACPI: ACPI bus type pnp unregistered [ 0.181031] PnPBIOS: Disabled by ACPI PNP [ 0.225573] Switching to clocksource acpi_pm [ 0.225674] PCI: max bus depth: 1 pci_try_num: 2 [ 0.225760] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000) [ 0.225779] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.225802] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.225824] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref] [ 0.225848] pci 0000:00:13.0: PCI bridge to [bus 02-02] [ 0.225869] pci 0000:00:13.0: bridge window [mem 0xd1000000-0xd10fffff] [ 0.225894] pci 0000:00:13.1: PCI bridge to [bus 03-03] [ 0.225912] pci 0000:00:13.1: bridge window [io 0x5000-0x5fff] [ 0.225933] pci 0000:00:13.1: bridge window [mem 0xd1100000-0xd11fffff] [ 0.225976] pci 0000:00:01.0: setting latency timer to 64 [ 0.226000] pci 0000:00:13.0: setting latency timer to 64 [ 0.226024] pci 0000:00:13.1: setting latency timer to 64 [ 0.226044] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.226061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.226079] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.226097] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.226116] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.226134] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.226153] pci_bus 0000:00: resource 10 [mem 0x40000000-0xdfffffff] [ 0.226172] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.226191] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff] [ 0.226210] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref] [ 0.226230] pci_bus 0000:02: resource 1 [mem 0xd1000000-0xd10fffff] [ 0.226248] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.226266] pci_bus 0000:03: resource 1 [mem 0xd1100000-0xd11fffff] [ 0.226498] NET: Registered protocol family 2 [ 0.227030] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.227030] Switched to NOHz mode on CPU #0 [ 0.227229] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.231304] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.233322] TCP: Hash tables configured (established 131072 bind 65536) [ 0.233338] TCP reno registered [ 0.233360] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.233423] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.234228] NET: Registered protocol family 1 [ 0.234329] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 1.832033] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 1.832113] pci 0000:01:00.0: Boot video device [ 1.832143] PCI: CLS 32 bytes, default 64 [ 1.832362] Unpacking initramfs... [ 3.514551] Freeing initrd memory: 9920k freed [ 3.535965] audit: initializing netlink socket (disabled) [ 3.536093] type=2000 audit(1322943013.531:1): initialized [ 3.644123] highmem bounce pool size: 64 pages [ 3.644149] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.674972] VFS: Disk quotas dquot_6.5.2 [ 3.675588] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.676352] msgmni has been set to 1751 [ 3.677232] alg: No test for stdrng (krng) [ 3.677367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.677385] io scheduler noop registered [ 3.677397] io scheduler deadline registered [ 3.677442] io scheduler cfq registered (default) [ 3.678582] ERST: Table is not found! [ 3.678592] GHES: HEST is not enabled! [ 3.678659] isapnp: Scanning for PnP cards... [ 4.032553] isapnp: No Plug & Play device found [ 4.032935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.035223] Linux agpgart interface v0.103 [ 4.035896] agpgart: Detected VIA CX700 chipset [ 4.058822] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 4.059342] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.064745] i8042: Detected active multiplexing controller, rev 1.1 [ 4.070143] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.070173] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.070325] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.070463] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.070605] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.071216] mousedev: PS/2 mouse device common for all mice [ 4.071394] rtc_cmos 00:03: RTC can wake from S4 [ 4.071719] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.071777] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 4.071836] cpuidle: using governor ladder [ 4.071848] cpuidle: using governor menu [ 4.073341] TCP cubic registered [ 4.073471] NET: Registered protocol family 10 [ 4.077196] Mobile IPv6 [ 4.077211] NET: Registered protocol family 17 [ 4.077232] Registering the dns_resolver key type [ 4.077345] Using IPI No-Shortcut mode [ 4.077878] PM: Hibernation image not present or could not be loaded. [ 4.077932] registered taskstats version 1 [ 4.093980] rtc_cmos 00:03: setting system clock to 2011-12-03 20:10:14 UTC (1322943014) [ 4.094282] Initializing network drop monitor service [ 4.094735] Freeing unused kernel memory: 404k freed [ 4.095876] Write protecting the kernel text: 2768k [ 4.096151] Write protecting the kernel read-only data: 1088k [ 4.096163] NX-protecting the kernel data: 3376k [ 4.116604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.214596] udevd[47]: starting version 172 [ 4.563116] ACPI: Fan [FAN0] (off) [ 4.563321] ACPI: Fan [FAN1] (off) [ 4.591503] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.591523] ACPI: Thermal Zone [THRM] (50 C) [ 4.624100] Refined TSC clocksource calibration: 600.021 MHz. [ 4.624126] Switching to clocksource tsc [ 4.805037] SCSI subsystem initialized [ 4.900648] usbcore: registered new interface driver usbfs [ 4.900761] usbcore: registered new interface driver hub [ 4.924224] usbcore: registered new device driver usb [ 4.927804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.927938] ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 4.928002] ehci_hcd 0000:00:10.4: setting latency timer to 64 [ 4.928094] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 4.972369] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 4.972477] ehci_hcd 0000:00:10.4: debug port 1 [ 4.972557] ehci_hcd 0000:00:10.4: irq 23, io mem 0xd1400000 [ 4.984122] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 4.984261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.984281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.984298] usb usb1: Product: EHCI Host Controller [ 4.984313] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd [ 4.984328] usb usb1: SerialNumber: 0000:00:10.4 [ 4.984993] hub 1-0:1.0: USB hub found [ 4.985018] hub 1-0:1.0: 6 ports detected [ 5.015271] uhci_hcd: USB Universal Host Controller Interface driver [ 5.015474] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.015510] uhci_hcd 0000:00:10.0: setting latency timer to 64 [ 5.015527] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 5.015584] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 5.015688] uhci_hcd 0000:00:10.0: irq 20, io base 0x00004400 [ 5.015875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.015894] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.015910] usb usb2: Product: UHCI Host Controller [ 5.015925] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 5.015940] usb usb2: SerialNumber: 0000:00:10.0 [ 5.022716] hub 2-0:1.0: USB hub found [ 5.022745] hub 2-0:1.0: 2 ports detected [ 5.023097] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 5.023131] uhci_hcd 0000:00:10.1: setting latency timer to 64 [ 5.023148] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 5.023190] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 5.023301] uhci_hcd 0000:00:10.1: irq 22, io base 0x00004420 [ 5.023475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.023494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.023511] usb usb3: Product: UHCI Host Controller [ 5.023525] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 5.023540] usb usb3: SerialNumber: 0000:00:10.1 [ 5.028916] hub 3-0:1.0: USB hub found [ 5.028944] hub 3-0:1.0: 2 ports detected [ 5.029299] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 5.029333] uhci_hcd 0000:00:10.2: setting latency timer to 64 [ 5.029350] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 5.029392] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 5.029495] uhci_hcd 0000:00:10.2: irq 21, io base 0x00004440 [ 5.029675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.029693] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.029710] usb usb4: Product: UHCI Host Controller [ 5.029724] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd [ 5.029739] usb usb4: SerialNumber: 0000:00:10.2 [ 5.039636] hub 4-0:1.0: USB hub found [ 5.039665] hub 4-0:1.0: 2 ports detected [ 5.055303] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 5.055405] 8139cp 0000:03:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 5.058551] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 5.058804] 8139too 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.058839] 8139too 0000:03:09.0: setting latency timer to 64 [ 5.088333] 8139too 0000:03:09.0: eth0: RealTek RTL8139 at 0x5000, 00:14:0b:48:90:5a, IRQ 16 [ 5.098063] libata version 3.00 loaded. [ 5.099726] pata_via 0000:00:0f.0: version 0.3.4 [ 5.099867] pata_via 0000:00:0f.0: power state changed by ACPI to D0 [ 5.099890] pata_via 0000:00:0f.0: power state changed by ACPI to D0 [ 5.103051] pata_via 0000:00:0f.0: setting latency timer to 64 [ 5.110150] scsi0 : pata_via [ 5.114884] scsi1 : pata_via [ 5.117803] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4460 irq 14 [ 5.117823] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4468 irq 15 [ 5.121048] ata1: port disabled--ignoring [ 5.284729] ata2.00: ATA-7: ST730212DE, 3.01, max UDMA/66 [ 5.284753] ata2.00: 58605120 sectors, multi 16: LBA48 [ 5.284781] ata2.00: limited to UDMA/33 due to 40-wire cable [ 5.296083] usb 1-4: new high speed USB device number 2 using ehci_hcd [ 5.316500] ata2.00: configured for UDMA/33 [ 5.317252] scsi 1:0:0:0: Direct-Access ATA ST730212DE 3.01 PQ: 0 ANSI: 5 [ 5.350470] sd 1:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 5.350680] sd 1:0:0:0: [sda] Write Protect is off [ 5.350700] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.350793] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.435042] usb 1-4: New USB device found, idVendor=0bda, idProduct=8187 [ 5.435064] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.435081] usb 1-4: Product: RTL8187_Wireless [ 5.435096] usb 1-4: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 5.435111] usb 1-4: SerialNumber: 0015AFC014DC [ 5.441044] sda: sda1 sda2 < sda5 > [ 5.443196] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.456681] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.548081] usb 1-5: new high speed USB device number 3 using ehci_hcd [ 5.924739] usb 1-5: New USB device found, idVendor=5986, idProduct=0101 [ 5.924763] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.924781] usb 1-5: Product: USB2.0 Camera [ 6.044049] usb 1-6: new high speed USB device number 4 using ehci_hcd [ 6.191520] usb 1-6: New USB device found, idVendor=0bda, idProduct=0158 [ 6.191543] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.191560] usb 1-6: Product: USB2.0-CRW [ 6.191574] usb 1-6: Manufacturer: Generic [ 6.191587] usb 1-6: SerialNumber: 20060413092100000 [ 6.288145] usbcore: registered new interface driver uas [ 6.296558] Initializing USB Mass Storage driver... [ 6.297726] usbcore: registered new interface driver usb-storage [ 6.297743] USB Mass Storage support registered. [ 6.306740] scsi2 : usb-storage 1-6:1.0 [ 6.307788] usbcore: registered new interface driver ums-realtek [ 6.493018] PM: Starting manual resume from disk [ 6.493039] PM: Hibernation image partition 8:5 present [ 6.493051] PM: Looking for hibernation image. [ 6.563454] PM: Image not found (code -22) [ 6.563467] PM: Hibernation image not present or could not be loaded. [ 6.594520] PM: Marking nosave pages: 000000000009d000 - 0000000000100000 [ 6.594554] PM: Basic memory bitmaps created [ 6.640506] PM: Basic memory bitmaps freed [ 6.983268] EXT3-fs (sda1): recovery required on readonly filesystem [ 6.983290] EXT3-fs (sda1): write access will be enabled during recovery [ 7.325619] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.326169] scsi: killing requests for dead queue [ 7.327417] scsi: killing requests for dead queue [ 7.328349] scsi: killing requests for dead queue [ 7.329017] scsi: killing requests for dead queue [ 7.329680] scsi: killing requests for dead queue [ 7.330342] scsi: killing requests for dead queue [ 7.331004] scsi: killing requests for dead queue [ 7.331665] scsi: killing requests for dead queue [ 7.338072] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.341748] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 20.025740] kjournald starting. Commit interval 5 seconds [ 20.026083] EXT3-fs (sda1): orphan cleanup on readonly fs [ 20.026112] ext3_orphan_cleanup: deleting unreferenced inode 98759 [ 20.026305] ext3_orphan_cleanup: deleting unreferenced inode 834004 [ 20.026392] ext3_orphan_cleanup: deleting unreferenced inode 833984 [ 20.026444] ext3_orphan_cleanup: deleting unreferenced inode 833972 [ 20.026492] ext3_orphan_cleanup: deleting unreferenced inode 833969 [ 20.026541] ext3_orphan_cleanup: deleting unreferenced inode 833924 [ 20.026602] ext3_orphan_cleanup: deleting unreferenced inode 833089 [ 20.026652] ext3_orphan_cleanup: deleting unreferenced inode 833071 [ 20.026710] ext3_orphan_cleanup: deleting unreferenced inode 832824 [ 20.026760] ext3_orphan_cleanup: deleting unreferenced inode 832471 [ 20.026817] ext3_orphan_cleanup: deleting unreferenced inode 279293 [ 20.026899] ext3_orphan_cleanup: deleting unreferenced inode 279294 [ 20.093753] ext3_orphan_cleanup: deleting unreferenced inode 279305 [ 20.093805] ext3_orphan_cleanup: deleting unreferenced inode 279303 [ 20.093839] ext3_orphan_cleanup: deleting unreferenced inode 279302 [ 20.093872] ext3_orphan_cleanup: deleting unreferenced inode 279301 [ 20.093905] ext3_orphan_cleanup: deleting unreferenced inode 279292 [ 20.094419] ext3_orphan_cleanup: deleting unreferenced inode 279248 [ 20.094462] ext3_orphan_cleanup: deleting unreferenced inode 279247 [ 20.107800] ext3_orphan_cleanup: deleting unreferenced inode 277460 [ 20.107843] ext3_orphan_cleanup: deleting unreferenced inode 277459 [ 20.107878] ext3_orphan_cleanup: deleting unreferenced inode 277453 [ 20.107912] EXT3-fs (sda1): 22 orphan inodes deleted [ 20.107926] EXT3-fs (sda1): recovery complete [ 21.094212] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 24.903901] udevd[244]: starting version 172 [ 26.511457] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 26.511492] ACPI: Power Button [PWRB] [ 26.511939] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 26.517306] ACPI: Lid Switch [LID] [ 26.517741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 26.517771] ACPI: Power Button [PWRF] [ 26.521934] ACPI: acpi_idle registered with cpuidle [ 26.522310] Marking TSC unstable due to TSC halts in idle [ 26.544160] Switching to clocksource acpi_pm [ 26.549123] ACPI: AC Adapter [ACAD] (on-line) [ 27.064394] ACPI: Battery Slot [BAT0] (battery present) [ 27.125220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.152716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.335729] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input4 [ 27.335773] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 27.356216] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 27.934017] Linux media interface: v0.10 [ 28.053371] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04750/0x200000/0x0 [ 28.161688] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 28.444211] Linux video capture interface: v2.00 [ 28.514576] cfg80211: Calling CRDA to update world regulatory domain [ 28.824498] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0101) [ 28.845566] input: USB2.0 Camera as /devices/pci0000:00/0000:00:10.4/usb1/1-5/1-5:1.0/input/input7 [ 28.846298] usbcore: registered new interface driver uvcvideo [ 28.846313] USB Video Class driver (1.1.1) [ 29.614399] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 29.617837] ieee80211 phy0: hwaddr 00:15:af:c0:14:dc, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 29.651855] rtl8187: Customer ID is 0x00 [ 29.654512] Registered led device: rtl8187-phy0::radio [ 29.658177] Registered led device: rtl8187-phy0::tx [ 29.661540] Registered led device: rtl8187-phy0::rx [ 29.662720] rtl8187: wireless switch is on [ 29.664336] usbcore: registered new interface driver rtl8187 [ 30.597131] snd_hda_intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 30.597264] snd_hda_intel 0000:02:01.0: irq 40 for MSI/MSI-X [ 30.597343] snd_hda_intel 0000:02:01.0: setting latency timer to 64 [ 30.597362] snd_hda_intel 0000:02:01.0: PCI: Disallowing DAC for device [ 32.874089] Adding 1238012k swap on /dev/sda5. Priority:-1 extents:1 across:1238012k [ 389.677996] EXT3-fs (sda1): using internal journal [ 389.934702] viafb: Unknown parameter `bogusarg' [ 390.079852] loop: module loaded [ 393.449751] fuse init (API version 7.17) [ 407.191003] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 407.223655] 8139too 0000:03:09.0: eth0: link down [ 407.229164] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 413.780570] [drm] Initialized drm 1.1.0 20060810 [ 413.864205] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 413.871493] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 413.871514] [drm] No driver support for vblank timestamp query. [ 413.871537] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 413.993491] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 413.993560] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 413.993677] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 418.713090] Bluetooth: Core ver 2.16 [ 418.713244] NET: Registered protocol family 31 [ 418.713259] Bluetooth: HCI device and connection manager initialized [ 418.713275] Bluetooth: HCI socket layer initialized [ 418.713288] Bluetooth: L2CAP socket layer initialized [ 418.714488] Bluetooth: SCO socket layer initialized [ 419.777154] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 419.777174] Bluetooth: BNEP filters: protocol multicast [ 424.316780] longhaul: APIC detected. Longhaul is currently broken in this configuration. [ 454.726252] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 454.728778] sd 2:0:0:0: [sdb] Asking for cache data failed [ 454.728812] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 505.062187] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 505.064772] sd 2:0:0:0: [sdb] Asking for cache data failed [ 505.064879] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 557.058354] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 557.061027] sd 2:0:0:0: [sdb] Asking for cache data failed [ 557.061149] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 563.160936] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 563.161027] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 563.161188] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 605.857399] wlan0: authenticate with 00:24:23:45:09:de (try 1) [ 605.864541] wlan0: authenticated [ 606.125366] wlan0: associate with 00:24:23:45:09:de (try 1) [ 606.129188] wlan0: RX AssocResp from 00:24:23:45:09:de (capab=0x421 status=0 aid=2) [ 606.129215] wlan0: associated [ 606.141563] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 609.058522] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 609.061292] sd 2:0:0:0: [sdb] Asking for cache data failed [ 609.061325] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 616.976038] wlan0: no IPv6 routers present [ 643.511823] wlan0: deauthenticating from 00:24:23:45:09:de by local choice (reason=3) [ 643.579388] cfg80211: Calling CRDA to update world regulatory domain [ 643.688492] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 643.688537] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 643.688610] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 661.058121] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 661.060928] sd 2:0:0:0: [sdb] Asking for cache data failed [ 661.060961] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 666.821447] wlan0: authenticate with 00:24:23:45:09:de (try 1) [ 666.824613] wlan0: authenticated [ 666.949326] wlan0: associate with 00:24:23:45:09:de (try 1) [ 666.952929] wlan0: RX ReassocResp from 00:24:23:45:09:de (capab=0x421 status=0 aid=2) [ 666.952957] wlan0: associated [ 713.058045] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 713.059905] sd 2:0:0:0: [sdb] Asking for cache data failed [ 713.060056] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 765.053756] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 765.055738] sd 2:0:0:0: [sdb] Asking for cache data failed [ 765.055840] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 817.054027] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 817.055895] sd 2:0:0:0: [sdb] Asking for cache data failed [ 817.055958] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 869.054157] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 869.056336] sd 2:0:0:0: [sdb] Asking for cache data failed [ 869.056456] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 921.054497] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 921.056885] sd 2:0:0:0: [sdb] Asking for cache data failed [ 921.057009] sd 2:0:0:0: [sdb] Assuming drive cache: write through
