--- Begin Message ---
Package: linux-2.6
Version: 3.0.0-3
Severity: important
Tags: upstream
Hi,
After IOS5 update on my iphone when I plug it on my Debian, it crashes. As I'm
using it as a modem it's quite problematic.
Nov 3 14:16:51 thib kernel: [ 371.824017] ------------[ cut here
]------------
Nov 3 14:16:51 thib kernel: [ 371.824024] WARNING: at /build/buildd-
linux-2.6_3.0.0-3-amd64-9ClimQ/linux-2.6-3.0.0/debian/build/source_amd64_none/net/sched/sch_generic.c:255
dev_watchdog+0xe9/0x148()
Nov 3 14:16:51 thib kernel: [ 371.824027] Hardware name: OptiPlex 780
Nov 3 14:16:51 thib kernel: [ 371.824029] NETDEV WATCHDOG: eth1 (ipheth):
transmit queue 0 timed out
Nov 3 14:16:51 thib kernel: [ 371.824031] Modules linked in: ipheth
acpi_cpufreq mperf cpufreq_conservative cpufreq_powersave cpufreq_stats
cpufreq_userspace parport_pc ppdev lp parport pci_stub vboxpci(O) vboxnetadp(O)
vboxnetflt(O) vboxdrv(O) fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc
ext2 coretemp loop joydev snd_hda_codec_analog nouveau evdev dell_wmi
sparse_keymap ttm drm_kms_helper drm snd_hda_intel snd_hda_codec i2c_algo_bit
mxm_wmi video snd_hwdep snd_pcm psmouse serio_raw wmi snd_seq snd_timer
snd_seq_device button i2c_i801 i2c_core snd soundcore snd_page_alloc dcdbas
processor thermal_sys ext3 jbd mbcache usbhid hid dm_mod sg sd_mod sr_mod
crc_t10dif cdrom uhci_hcd ahci libahci libata scsi_mod ehci_hcd e1000e usbcore
[last unloaded: scsi_wait_scan]
Nov 3 14:16:51 thib kernel: [ 371.824088] Pid: 840, comm: wcg_hcc1_img_6.
Tainted: G O 3.0.0-1-amd64 #1
Nov 3 14:16:51 thib kernel: [ 371.824090] Call Trace:
Nov 3 14:16:51 thib kernel: [ 371.824091] <IRQ> [<ffffffff81046521>] ?
warn_slowpath_common+0x78/0x8c
Nov 3 14:16:51 thib kernel: [ 371.824099] [<ffffffff810465d6>] ?
warn_slowpath_fmt+0x45/0x4a
Nov 3 14:16:51 thib kernel: [ 371.824103] [<ffffffff81066feb>] ?
timekeeping_get_ns+0xd/0x2a
Nov 3 14:16:51 thib kernel: [ 371.824105] [<ffffffff812953c4>] ?
netif_tx_lock+0x43/0x77
Nov 3 14:16:51 thib kernel: [ 371.824108] [<ffffffff81067486>] ?
ktime_get+0x50/0x89
Nov 3 14:16:51 thib kernel: [ 371.824110] [<ffffffff8129552d>] ?
dev_watchdog+0xe9/0x148
Nov 3 14:16:51 thib kernel: [ 371.824114] [<ffffffff81052b04>] ?
run_timer_softirq+0x1bf/0x28a
Nov 3 14:16:51 thib kernel: [ 371.824117] [<ffffffff8106341e>] ?
hrtimer_interrupt+0x10d/0x19a
Nov 3 14:16:51 thib kernel: [ 371.824120] [<ffffffff81295444>] ?
netif_tx_unlock+0x4c/0x4c
Nov 3 14:16:51 thib kernel: [ 371.824123] [<ffffffff8104bdd4>] ?
__do_softirq+0xb9/0x178
Nov 3 14:16:51 thib kernel: [ 371.824126] [<ffffffff8103bd47>] ?
check_preempt_wakeup+0x133/0x19c
Nov 3 14:16:51 thib kernel: [ 371.824129] [<ffffffff8133cf1c>] ?
call_softirq+0x1c/0x30
Nov 3 14:16:51 thib kernel: [ 371.824132] [<ffffffff8100a9ef>] ?
do_softirq+0x3f/0x84
Nov 3 14:16:51 thib kernel: [ 371.824135] [<ffffffff8104c040>] ?
irq_exit+0x3f/0xa3
Nov 3 14:16:51 thib kernel: [ 371.824137] [<ffffffff8100a71b>] ?
do_IRQ+0x85/0x9e
Nov 3 14:16:51 thib kernel: [ 371.824140] [<ffffffff81336e13>] ?
common_interrupt+0x13/0x13
Nov 3 14:16:51 thib kernel: [ 371.824141] <EOI>
Nov 3 14:16:51 thib kernel: [ 371.824143] ---[ end trace 8eee52d7b0ec47bb
]---
Nov 3 14:16:51 thib kernel: [ 371.824145] ipheth: ipheth_tx_timeout: TX
timeout
Tested also with an iPhone 4G, same problem.
Cheers
Thibault
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-3.0.0-1-amd64 root=/dev/mapper/thib-main ro quiet
** Tainted: WO (4608)
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[ 8.217802] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag
0x08
[ 8.217805] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag
0xff
[ 8.217807] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag
0xff
[ 8.217810] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag
0xff
[ 8.217814] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xD5EA
[ 8.243077] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xD99C
[ 8.249421] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xE24B
[ 8.249429] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xE33D
[ 8.250507] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xE54D
[ 8.250509] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xE5B2
[ 8.270467] [drm] nouveau 0000:01:00.0: 0xE5B2: Condition still not met
after 20ms, skipping following opcodes
[ 8.289872] [drm] nouveau 0000:01:00.0: 2 available performance level(s)
[ 8.289877] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader
338MHz fanspeed 100% timing 0
[ 8.289881] [drm] nouveau 0000:01:00.0: 3: memory 500MHz core 540MHz shader
1300MHz fanspeed 100% timing 1
[ 8.289895] [drm] nouveau 0000:01:00.0: Register 0x00004030 not found in PLL
limits table
[ 8.289902] [drm] nouveau 0000:01:00.0: c: memory 499MHz core 540MHz shader
1300MHz
[ 8.290019] [TTM] Zone kernel: Available graphics memory: 4066256 kiB.
[ 8.290022] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 8.290023] [TTM] Initializing pool allocator.
[ 8.290040] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 8.292464] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 8.307360] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 8.307363] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 8.308335] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.308337] [drm] No driver support for vblank timestamp query.
[ 8.416288] composite sync not supported
[ 8.435630] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.469649] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40000000,
bo ffff88022f853c00
[ 8.469719] fbcon: nouveaufb (fb0) is primary device
[ 8.507201] Console: switching to colour frame buffer device 240x67
[ 8.509279] fb0: nouveaufb frame buffer device
[ 8.509280] drm: registered panic notifier
[ 8.509285] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 0
[ 9.912744] EXT3-fs (dm-0): using internal journal
[ 10.102649] loop: module loaded
[ 10.445292] Adding 7815164k swap on /dev/mapper/thib-swap. Priority:-1
extents:1 across:7815164k
[ 14.084201] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 14.140084] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 14.140923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.391755] RPC: Registered named UNIX socket transport module.
[ 14.391758] RPC: Registered udp transport module.
[ 14.391759] RPC: Registered tcp transport module.
[ 14.391761] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.446134] FS-Cache: Loaded
[ 14.477713] FS-Cache: Netfs 'nfs' registered for caching
[ 14.489282] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.022798] fuse init (API version 7.16)
[ 16.183718] Disabling lock debugging due to kernel taint
[ 16.188771] vboxdrv: Found 4 processor cores.
[ 16.189015] vboxdrv: fAsync=0 offMin=0x650 offMax=0x2c70
[ 16.189078] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 16.189080] vboxdrv: Successfully loaded version 4.1.4_Debian (interface
0x00190000).
[ 16.304027] vboxpci: IOMMU not found (not registered)
[ 17.112953] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
[ 17.113736] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.817606] composite sync not supported
[ 20.027468] composite sync not supported
[ 23.244869] lp: driver loaded but no devices found
[ 23.372911] ppdev: user-space parallel port driver
[ 34.080116] composite sync not supported
[ 365.452035] usb 2-1: new high speed USB device number 3 using ehci_hcd
[ 365.587660] usb 2-1: New USB device found, idVendor=05ac, idProduct=1294
[ 365.587663] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 365.587665] usb 2-1: Product: iPhone
[ 365.587666] usb 2-1: Manufacturer: Apple Inc.
[ 365.587668] usb 2-1: SerialNumber: eca857d74d2c6ca2de89ec9be4a69cebb9d49dd9
[ 366.136055] ipheth 2-1:4.2: Apple iPhone USB Ethernet device attached
[ 366.136076] usbcore: registered new interface driver ipheth
[ 371.824017] ------------[ cut here ]------------
[ 371.824024] WARNING: at
/build/buildd-linux-2.6_3.0.0-3-amd64-9ClimQ/linux-2.6-3.0.0/debian/build/source_amd64_none/net/sched/sch_generic.c:255
dev_watchdog+0xe9/0x148()
[ 371.824027] Hardware name: OptiPlex 780
[ 371.824029] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out
[ 371.824031] Modules linked in: ipheth acpi_cpufreq mperf
cpufreq_conservative cpufreq_powersave cpufreq_stats cpufreq_userspace
parport_pc ppdev lp parport pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O)
vboxdrv(O) fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc ext2 coretemp
loop joydev snd_hda_codec_analog nouveau evdev dell_wmi sparse_keymap ttm
drm_kms_helper drm snd_hda_intel snd_hda_codec i2c_algo_bit mxm_wmi video
snd_hwdep snd_pcm psmouse serio_raw wmi snd_seq snd_timer snd_seq_device button
i2c_i801 i2c_core snd soundcore snd_page_alloc dcdbas processor thermal_sys
ext3 jbd mbcache usbhid hid dm_mod sg sd_mod sr_mod crc_t10dif cdrom uhci_hcd
ahci libahci libata scsi_mod ehci_hcd e1000e usbcore [last unloaded:
scsi_wait_scan]
[ 371.824088] Pid: 840, comm: wcg_hcc1_img_6. Tainted: G O
3.0.0-1-amd64 #1
[ 371.824090] Call Trace:
[ 371.824091] <IRQ> [<ffffffff81046521>] ? warn_slowpath_common+0x78/0x8c
[ 371.824099] [<ffffffff810465d6>] ? warn_slowpath_fmt+0x45/0x4a
[ 371.824103] [<ffffffff81066feb>] ? timekeeping_get_ns+0xd/0x2a
[ 371.824105] [<ffffffff812953c4>] ? netif_tx_lock+0x43/0x77
[ 371.824108] [<ffffffff81067486>] ? ktime_get+0x50/0x89
[ 371.824110] [<ffffffff8129552d>] ? dev_watchdog+0xe9/0x148
[ 371.824114] [<ffffffff81052b04>] ? run_timer_softirq+0x1bf/0x28a
[ 371.824117] [<ffffffff8106341e>] ? hrtimer_interrupt+0x10d/0x19a
[ 371.824120] [<ffffffff81295444>] ? netif_tx_unlock+0x4c/0x4c
[ 371.824123] [<ffffffff8104bdd4>] ? __do_softirq+0xb9/0x178
[ 371.824126] [<ffffffff8103bd47>] ? check_preempt_wakeup+0x133/0x19c
[ 371.824129] [<ffffffff8133cf1c>] ? call_softirq+0x1c/0x30
[ 371.824132] [<ffffffff8100a9ef>] ? do_softirq+0x3f/0x84
[ 371.824135] [<ffffffff8104c040>] ? irq_exit+0x3f/0xa3
[ 371.824137] [<ffffffff8100a71b>] ? do_IRQ+0x85/0x9e
[ 371.824140] [<ffffffff81336e13>] ? common_interrupt+0x13/0x13
[ 371.824141] <EOI>
[ 371.824143] ---[ end trace 8eee52d7b0ec47bb ]---
[ 371.824145] ipheth: ipheth_tx_timeout: TX timeout
[ 376.432017] eth1: no IPv6 routers present
[ 376.832019] ipheth: ipheth_tx_timeout: TX timeout
[ 381.237782] usb 2-1: USB disconnect, device number 3
[ 381.268049] ipheth 2-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 834.349415] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 843.332162] hda-intel: Invalid position buffer, using LPIB read method
instead.
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 780
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A08
board_vendor: Dell Inc.
board_name: 0C27VV
board_version: A03
** Loaded modules:
Module Size Used by
ipheth 13024 0
acpi_cpufreq 13009 0
mperf 12453 1 acpi_cpufreq
cpufreq_conservative 13147 0
cpufreq_powersave 12454 0
cpufreq_stats 12862 0
cpufreq_userspace 12576 0
parport_pc 22395 0
ppdev 12763 0
lp 17270 0
parport 31929 3 parport_pc,ppdev,lp
pci_stub 12429 1
vboxpci 19059 0
vboxnetadp 13202 0
vboxnetflt 23595 0
vboxdrv 194054 3 vboxpci,vboxnetadp,vboxnetflt
fuse 66430 1
nfsd 260662 2
nfs 259369 0
lockd 71503 2 nfsd,nfs
fscache 36721 1 nfs
auth_rpcgss 37204 2 nfsd,nfs
nfs_acl 12511 2 nfsd,nfs
sunrpc 172969 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
ext2 63732 1
coretemp 12939 0
loop 22711 0
joydev 17262 0
snd_hda_codec_analog 77715 1
nouveau 516733 2
evdev 17558 14
dell_wmi 12477 0
sparse_keymap 12795 1 dell_wmi
ttm 52979 1 nouveau
drm_kms_helper 27216 1 nouveau
drm 163280 4 nouveau,ttm,drm_kms_helper
snd_hda_intel 26140 1
snd_hda_codec 72699 2 snd_hda_codec_analog,snd_hda_intel
i2c_algo_bit 12850 1 nouveau
mxm_wmi 12473 1 nouveau
video 17707 1 nouveau
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68104 2 snd_hda_intel,snd_hda_codec
psmouse 55656 0
serio_raw 12846 0
wmi 13243 2 dell_wmi,mxm_wmi
snd_seq 45208 0
snd_timer 22581 2 snd_pcm,snd_seq
snd_seq_device 13137 1 snd_seq
button 12930 1 nouveau
i2c_i801 16870 0
i2c_core 23909 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd 52823 10
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 13152 1 snd
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
dcdbas 13256 0
processor 27942 5 acpi_cpufreq
thermal_sys 17949 2 video,processor
ext3 114399 1
jbd 43355 1 ext3
mbcache 13066 2 ext2,ext3
usbhid 40516 0
hid 73172 1 usbhid
dm_mod 63164 6
sg 25985 0
sd_mod 36259 3
sr_mod 21811 0
crc_t10dif 12348 1 sd_mod
cdrom 35093 1 sr_mod
uhci_hcd 26787 0
ahci 25089 2
libahci 22767 1 ahci
libata 149043 2 ahci,libahci
scsi_mod 162442 4 sg,sr_mod,sd_mod,libata
ehci_hcd 40090 0
e1000e 124997 0
usbcore 128338 5 ipheth,usbhid,uhci_hcd,ehci_hcd
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
allow-hotplug eth1
iface eth1 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether bc:30:5b:a9:f7:6c brd ff:ff:ff:ff:ff:ff
inet 10.3.3.77/24 brd 10.3.3.255 scope global eth0
inet6 2001:1600:2:f:be30:5bff:fea9:f76c/64 scope global dynamic
valid_lft 2591872sec preferred_lft 604672sec
inet6 fe80::be30:5bff:fea9:f76c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 2162 66 0 0 0 0 0 0 2162
66 0 0 0 0 0 0
eth0: 37468007 43687 0 0 0 0 0 2086 2411997
18860 0 0 0 0 0 0
*** Protocol statistics:
Ip:
21179 total packets received
11 with invalid addresses
0 forwarded
0 incoming packets discarded
21168 incoming packets delivered
15065 requests sent out
Icmp:
24 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 24
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 24
Tcp:
443 active connections openings
0 passive connection openings
4 failed connection attempts
44 connection resets received
26 connections established
19821 segments received
17799 segments send out
6 segments retransmited
0 bad segments received.
536 resets sent
Udp:
1908 packets received
0 packets to unknown port received.
0 packet receive errors
880 packets sent
UdpLite:
TcpExt:
40 TCP sockets finished time wait in fast timer
768 delayed acks sent
Quick ack mode was activated 2 times
13 packets directly queued to recvmsg prequeue.
13 bytes directly received in process context from prequeue
15164 packet headers predicted
1021 acknowledgments not containing data payload received
3241 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
3 retransmits in slow start
3 other TCP timeouts
2 DSACKs sent for old packets
1 DSACKs received
226 connections reset due to unexpected data
42 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
IpExt:
InMcastPkts: 1174
OutMcastPkts: 51
InBcastPkts: 2422
OutBcastPkts: 7
InOctets: 33779941
OutOctets: 1588727
InMcastOctets: 294111
OutMcastOctets: 6180
InBcastOctets: 226128
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f4000000-f7efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Dell Device [1028:0276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7fd9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ece0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f7fda000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f7fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f3f00000-f3ffffff
Prefetchable memory behind bridge: 00000000fc200000-00000000fc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI
Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f3e00000-f3efffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0420]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family)
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 49
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Dell Device [1028:0420]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7fdb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0980 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 9300
GE] [10de:06e0] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:060c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at dc80 [size=128]
Expansion ROM at f7e00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:1005 Dell Computer Corp. Multimedia Pro Keyboard Hub
Bus 006 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 003: ID 413c:2011 Dell Computer Corp. Multimedia Pro Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.3
ii module-init-tools 3.16-1
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.0.0-1-amd64 suggests:
pn extlinux 2:4.04+dfsg-5
pn grub-pc 1.99-12
pn linux-doc-3.0.0 <none>
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
--- End Message ---
signature.asc
