Hi Ben!
>>> removing paths to our SAN and adding them back results in >> [...] >> >> Does the attached patch help? Instructions for building a patched >> kernel can be found at: >> >> http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official > > Sorry, you'll need this patch as well. thanks for the patches! After applying them we run into the following oops instead. Please note that - this only seems to happen when there is a partition on the LUN, using LVM on the DM device directly doesn't seem to trigger that bug - you'll have to fix the vserver patch when the two dm patches are applied (not the issue here, but wanted to mention it before you fall about it) [ 2000.379681] device-mapper: multipath: Failing path 8:32. [ 2000.380022] device-mapper: multipath: Failing path 8:48. [ 2000.381502] device-mapper: table: 254:2: multipath: error getting device [ 2000.381533] device-mapper: ioctl: error adding target to table [ 2000.382355] device-mapper: table: 254:2: multipath: error getting device [ 2000.382385] device-mapper: ioctl: error adding target to table [ 2000.411143] general protection fault: 0000 [#1] SMP [ 2000.411175] last sysfs file: /sys/devices/pci0000:00/0000:00:07.0/0000:0e:00.0/host0/rport-0:0-3/target0:0:3/0:0:3:0/block/sdd/uevent [ 2000.411229] CPU 4 [ 2000.411251] Modules linked in: 8021q garp stp ext4 jbd2 crc16 dm_round_robin dm_multipath scsi_dh bonding ipmi_devintf ipmi_si ipmi_msghandler ohci_hcd snd_pcm snd_timer radeon snd ttm soundcore drm_kms_helper drm i2c_algo_bit i2c_core hpilo snd_page_alloc hpwdt joydev pcspkr evdev button power_meter processor container psmouse serio_raw ext3 jbd mbcache dm_mod sd_mod crc_t10dif sg sr_mod cdrom ata_generic usbhid hid qla2xxx hpsa scsi_transport_fc uhci_hcd thermal scsi_tgt ata_piix ehci_hcd libata bnx2 qlcnic usbcore cciss nls_base scsi_mod thermal_sys [last unloaded: scsi_wait_scan] [ 2000.411579] Pid: 8402, comm: multipath Not tainted 2.6.32-5-amd64 #1 ProLiant DL380 G7 [ 2000.411623] RIP: 0010:[<ffffffff8117629b>] [<ffffffff8117629b>] elv_drain_elevator+0x13/0x5a [ 2000.411674] RSP: 0018:ffff880e1b2cfd18 EFLAGS: 00010002 [ 2000.411700] RAX: ffff880719b0cd80 RBX: ffff880719a291a0 RCX: 0000000000000000 [ 2000.411729] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff880719a291a0 [ 2000.411758] RBP: ffff880719a291a0 R08: ffff88071a65be70 R09: ffff88071a701840 [ 2000.411787] R10: 0000000100067c84 R11: ffff880713a8a780 R12: ffff880719a291a0 [ 2000.411816] R13: 0000000000000002 R14: ffff880719707160 R15: ffff880719707044 [ 2000.411845] FS: 00007f3b1d07a7a0(0000) GS:ffff88001a440000(0000) knlGS:0000000000000000 [ 2000.411889] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2000.411916] CR2: 00000000025ea210 CR3: 0000000e1a53f000 CR4: 00000000000006e0 [ 2000.411945] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2000.411974] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2000.418573] Process multipath (pid: 8402, threadinfo ffff880e1b2ce000, task ffff880e1b93e9f0) [ 2000.418618] Stack: [ 2000.418637] ffff880248cc0018 ffffffff81176c40 ffff880248cc0018 ffff880248cc0018 [ 2000.418674] <0> ffff880719a291a0 0000000000000096 ffff880719707000 ffffffff8117dec9 [ 2000.418726] <0> ffff880248cc0018 ffffc9000ca8b040 ffff880719a2b4e0 ffffffffa019492b [ 2000.418795] Call Trace: [ 2000.418818] [<ffffffff81176c40>] ? elv_insert+0x91/0x260 [ 2000.418847] [<ffffffff8117dec9>] ? blk_insert_cloned_request+0x4f/0x67 [ 2000.418879] [<ffffffffa019492b>] ? dm_dispatch_request+0x33/0x59 [dm_mod] [ 2000.418912] [<ffffffffa0195ef7>] ? dm_request_fn+0x121/0x1a2 [dm_mod] [ 2000.418941] [<ffffffff8117eef6>] ? __blk_run_queue+0x35/0x66 [ 2000.418970] [<ffffffffa0194a43>] ? dm_resume+0xb5/0x123 [dm_mod] [ 2000.419001] [<ffffffffa0199071>] ? dev_suspend+0x0/0x196 [dm_mod] [ 2000.419032] [<ffffffffa01991d0>] ? dev_suspend+0x15f/0x196 [dm_mod] [ 2000.419063] [<ffffffffa0199c24>] ? ctl_ioctl+0x1c6/0x20e [dm_mod] [ 2000.419092] [<ffffffffa0199c7a>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod] [ 2000.419124] [<ffffffff810fab66>] ? vfs_ioctl+0x21/0x6c [ 2000.419150] [<ffffffff810fb0b4>] ? do_vfs_ioctl+0x48d/0x4cb [ 2000.419178] [<ffffffff810d066d>] ? remove_vma+0x6b/0x72 [ 2000.419205] [<ffffffff810d1782>] ? do_munmap+0x307/0x329 [ 2000.419231] [<ffffffff810fb143>] ? sys_ioctl+0x51/0x70 [ 2000.419258] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b [ 2000.419285] Code: 41 0f 18 09 75 bb 48 8b 02 48 89 70 08 48 89 06 48 89 56 08 48 89 32 c3 53 48 89 fb 48 8b 43 18 be 01 00 00 00 48 89 df 48 8b 00 <ff> 50 20 85 c0 75 ea 8b 8b b0 03 00 00 85 c9 74 34 8b 15 ca ea [ 2000.419478] RIP [<ffffffff8117629b>] elv_drain_elevator+0x13/0x5a [ 2000.419507] RSP <ffff880e1b2cfd18> [ 2000.419759] ---[ end trace cff8452e221a0978 ]--- [ 2130.432222] qla2xxx 0000:0e:00.0: LIP reset occurred (f700). [ 2130.647148] qla2xxx 0000:0e:00.1: LOOP DOWN detected (2 3 0). [ 2130.808220] qla2xxx 0000:0e:00.0: LIP occurred (f700). [ 2130.808342] qla2xxx 0000:0e:00.0: LIP reset occurred (f7f7). [ 2130.857976] qla2xxx 0000:0e:00.0: LOOP UP detected (8 Gbps). Cheers, Bernd -- Mit freundlichen Grüßen, ------------------------------------------------- Bernd Zeimetz Systems Engineer conova communications GmbH web | www.conova.com mail | b.zeim...@conova.com ZENTRALE SALZBURG Karolingerstraße 36A A - 5020 Salzburg tel | +43/(0)662 2200-313 fax | +43/(0)662 2200-209 ------------------------------------------------ -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4eb146cf.7070...@conova.com
