--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-2
Severity: normal
File:
/lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
In 2.6.39-686-pae kernel, the ralink wifi pci card isn't working, while in a
2.6.38 it is.
$ lspci | grept ralink
32:0b:00.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g
$ lsmod | grept rt
23:rt61pci 22168 0
24:rt2x00pci 12683 1 rt61pci
25:rt2x00lib 28634 2 rt61pci,rt2x00pci
26:mac80211 164606 2 rt2x00pci,rt2x00lib
27:cfg80211 107076 2 rt2x00lib,mac80211
28:eeprom_93cx6 12423 1 rt61pci
92:crc_itu_t 12331 2 rt61pci,firewire_core
$ modinfo rt61pci
filename:
/lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
license: GPL
firmware: rt2661.bin
firmware: rt2561s.bin
firmware: rt2561.bin
description: Ralink RT61 PCI & PCMCIA Wireless LAN driver.
version: 2.3.0
author: http://rt2x00.serialmonkey.com
srcversion: 12A0A8B7A10EAE6E53E404A
alias: pci:v00001814d00000401sv*sd*bc*sc*i*
alias: pci:v00001814d00000302sv*sd*bc*sc*i*
alias: pci:v00001814d00000301sv*sd*bc*sc*i*
depends: rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t
intree: Y
vermagic: 2.6.39-2-686-pae SMP mod_unload modversions 686
parm: nohwcrypt:Disable hardware encryption. (bool)
-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (b...@decadent.org.uk) (gcc
version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae
root=UUID=8fe7010b-ba34-4eb0-9a7a-d5343f670dba ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 7.813374] yenta_cardbus 0000:06:05.0: Socket status: 30000006
[ 7.813384] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window:
[io 0x2000-0x2fff]
[ 7.813388] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
excluding 0x2000-0x20ff 0x2400-0x24ff 0x2800-0x28bf
[ 7.820049] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window:
[mem 0xf0000000-0xf5ffffff]
[ 7.820054] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf0000000-0xf5ffffff: excluding 0xf0000000-0xf41fffff
[ 7.820072] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window:
[mem 0xd4000000-0xd7ffffff pref]
[ 7.820077] pcmcia_socket pcmcia_socket0: cs: memory probe
0xd4000000-0xd7ffffff: excluding 0xd4000000-0xd7ffffff
[ 7.823408] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0098]
[ 7.823433] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts
to PCI
[ 7.823436] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[ 7.823444] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[ 7.859985] [drm] Initialized drm 1.1.0 20060810
[ 8.000602] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps:
0xa04713/0x204000/0x0
[ 8.053076] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 8.053082] yenta_cardbus 0000:0a:09.0: Socket status: 30000820
[ 8.053087] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a)
from #0b to #0e
[ 8.053098] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window:
[io 0x3000-0x3fff]
[ 8.053104] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff:
excluding 0x3000-0x30ff 0x3400-0x34ff
[ 8.060036] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window:
[mem 0xd0200000-0xd02fffff]
[ 8.060041] pcmcia_socket pcmcia_socket1: cs: memory probe
0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
[ 8.060061] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window:
[mem 0xd8000000-0xdbffffff pref]
[ 8.060065] pcmcia_socket pcmcia_socket1: cs: memory probe
0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
[ 8.060185] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input10
[ 8.205631] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.205638] i915 0000:00:02.0: setting latency timer to 64
[ 8.206941] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.206945] [drm] Driver supports precise vblank timestamp query.
[ 8.383538] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding nothing: probe failed.
[ 8.383612] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding nothing: probe failed.
[ 8.383657] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
excluding nothing: probe failed.
[ 8.383696] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
excluding nothing: probe failed.
[ 8.383740] pcmcia_socket pcmcia_socket0: cs: memory probe
0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 8.383776] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 8.383811] pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 8.383846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
excluding nothing: probe failed.
[ 8.500119] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq
6 len 1024 ret -110
[ 8.513018] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.513449] [drm] initialized overlay support
[ 8.654695] Linux media interface: v0.10
[ 8.693520] Linux video capture interface: v2.00
[ 8.782630] gspca: v2.12.0 registered
[ 8.786598] gspca: probing 046d:0892
[ 8.786602] vc032x: Sensor POxxxx
[ 8.788942] gspca: video0 created
[ 8.788964] usbcore: registered new interface driver vc032x
[ 8.952061] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into
slot 1
[ 8.952095] pci 0000:0b:00.0: [1814:0302] type 0 class 0x000280
[ 8.952135] pci 0000:0b:00.0: reg 10: [mem 0xffff8000-0xffffffff]
[ 8.952300] pci 0000:0b:00.0: BAR 0: assigned [mem 0xdc000000-0xdc007fff]
[ 8.952313] pci 0000:0b:00.0: BAR 0: set to [mem 0xdc000000-0xdc007fff] (PCI
address [0xdc000000-0xdc007fff])
[ 8.952475] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 8.954589] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.955429] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 8.956154] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 8.956913] pcmcia_socket pcmcia_socket1: cs: memory probe
0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 8.956958] pcmcia_socket pcmcia_socket1: cs: memory probe
0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 8.957000] pcmcia_socket pcmcia_socket1: cs: memory probe
0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 8.957042] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 9.075273] cfg80211: Calling CRDA to update world regulatory domain
[ 9.301847] fbcon: inteldrmfb (fb0) is primary device
[ 9.562009] rt61pci 0000:0b:00.0: enabling device (0000 -> 0002)
[ 9.562022] rt61pci 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 9.562038] rt61pci 0000:0b:00.0: setting latency timer to 64
[ 9.571154] Console: switching to colour frame buffer device 160x50
[ 9.577487] fb0: inteldrmfb frame buffer device
[ 9.577489] drm: registered panic notifier
[ 9.577667] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.577725] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 9.577793] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9.577830] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.627901] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.628678] Registered led device: rt61pci-phy0::radio
[ 9.628712] Registered led device: rt61pci-phy0::assoc
[ 9.656621] udevd[304]: renamed network interface wlan0 to wlan2
[ 9.661328] hda_codec: ALC883: BIOS auto-probing.
[ 9.662291] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 11.096302] Adding 5855228k swap on /dev/sda2. Priority:-1 extents:1
across:5855228k
[ 11.100734] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 11.542026] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.726121] loop: module loaded
[ 12.859418] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 12.938550] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.833050] fuse init (API version 7.16)
[ 14.999065] Disabling lock debugging due to kernel taint
[ 15.048784] vboxdrv: Found 2 processor cores.
[ 15.049058] vboxdrv: fAsync=0 offMin=0x302 offMax=0xa32
[ 15.049116] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 15.049119] vboxdrv: Successfully loaded version 4.0.8_Debian (interface
0x00180000).
[ 15.618390] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.911125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.322714] apm: BIOS not found.
[ 34.157312] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.344242] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 34.624054] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 102.444823] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 102.444831] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[ 102.445210] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.808038] eth0: no IPv6 routers present
[ 196.912052] CE: hpet increased min_delta_ns to 20113 nsec
[ 437.783190] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 12737 1
mperf 12387 1 acpi_cpufreq
cpufreq_powersave 12422 0
cpufreq_stats 12670 0
cpufreq_conservative 12987 0
cpufreq_userspace 12520 0
vboxnetadp 13146 0
vboxnetflt 23683 0
vboxdrv 154090 2 vboxnetadp,vboxnetflt
binfmt_misc 12778 1
uinput 12984 1
fuse 55666 1
loop 17777 0
firewire_sbp2 17514 0
snd_hda_codec_realtek 207702 1
arc4 12418 2
ecb 12649 2
rt61pci 22168 0
rt2x00pci 12683 1 rt61pci
rt2x00lib 28634 2 rt61pci,rt2x00pci
mac80211 164606 2 rt2x00pci,rt2x00lib
cfg80211 107076 2 rt2x00lib,mac80211
eeprom_93cx6 12423 1 rt61pci
gspca_vc032x 29935 0
gspca_main 22289 1 gspca_vc032x
videodev 61226 1 gspca_main
media 13692 1 videodev
snd_hda_intel 21529 0
i915 286502 2
snd_hda_codec 57741 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12906 1 snd_hda_codec
snd_pcm 52731 2 snd_hda_intel,snd_hda_codec
drm_kms_helper 26550 1 i915
pcmcia 32024 0
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
drm 129190 3 i915,drm_kms_helper
joydev 16906 0
snd 38189 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 12878 1 snd
acer_wmi 17475 0
i2c_i801 12670 0
sparse_keymap 12680 1 acer_wmi
rfkill 18510 2 cfg80211,acer_wmi
yenta_socket 22152 0
tifm_7xx1 12762 0
i2c_algo_bit 12706 1 i915
pcmcia_rsrc 17314 1 yenta_socket
rng_core 12550 0
pcmcia_core 17973 3 pcmcia,yenta_socket,pcmcia_rsrc
i2c_core 19022 6
videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
evdev 13084 20
tifm_core 13098 1 tifm_7xx1
pcspkr 12515 0
psmouse 45863 0
serio_raw 12758 0
ac 12552 0
wmi 13018 1 acer_wmi
snd_page_alloc 12841 2 snd_hda_intel,snd_pcm
battery 12957 0
power_supply 13283 2 ac,battery
button 12783 1 i915
video 17345 1 i915
container 12525 0
shpchp 26653 0
pci_hotplug 26303 1 shpchp
processor 26983 3 acpi_cpufreq
ext4 270998 3
mbcache 12810 1 ext4
jbd2 55701 1 ext4
crc16 12327 1 ext4
hid_microsoft 12497 0
usbhid 35206 0
hid 59841 2 hid_microsoft,usbhid
sd_mod 35060 5
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 4
tg3 103807 0
uhci_hcd 21850 0
libata 132100 2 ata_generic,ata_piix
ehci_hcd 34885 0
thermal 13058 0
scsi_mod 134453 3 firewire_sbp2,sd_mod,libata
firewire_ohci 26332 0
usbcore 99225 6 gspca_vc032x,gspca_main,usbhid,uhci_hcd,ehci_hcd
thermal_sys 17667 3 video,processor,thermal
firewire_core 42365 2 firewire_sbp2,firewire_ohci
libphy 18279 1 tg3
crc_itu_t 12331 2 rt61pci,firewire_core
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:16:36:31:99:8d brd ff:ff:ff:ff:ff:ff
inet 192.168.11.106/24 brd 192.168.11.255 scope global eth0
inet6 fe80::216:36ff:fe31:998d/64 scope link
valid_lft forever preferred_lft forever
3: wlan2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether f0:7d:68:5d:67:48 brd ff:ff:ff:ff:ff:ff
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 287275 207 0 0 0 0 0 0 287275
207 0 0 0 0 0 0
eth0: 1101892 1673 0 0 0 0 0 0 213505
1633 0 0 0 0 0 0
wlan2: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1875 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
1874 incoming packets delivered
1818 requests sent out
Icmp:
73 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 73
8 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 8
IcmpMsg:
InType3: 73
OutType3: 8
Tcp:
38 active connections openings
3 passive connection openings
0 failed connection attempts
0 connection resets received
16 connections established
1442 segments received
1346 segments send out
2 segments retransmited
0 bad segments received.
0 resets sent
Udp:
350 packets received
8 packets to unknown port received.
0 packet receive errors
460 packets sent
UdpLite:
TcpExt:
17 TCP sockets finished time wait in fast timer
99 delayed acks sent
Quick ack mode was activated 2 times
740 packet headers predicted
137 acknowledgments not containing data payload received
226 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
2 other TCP timeouts
2 DSACKs sent for old packets
2 DSACKs received
TCPDSACKIgnoredNoUndo: 2
IpExt:
InMcastPkts: 9
OutMcastPkts: 17
InOctets: 1361589
OutOctets: 467152
InMcastOctets: 3198
OutMcastOctets: 4241
*** Device features:
eth0: 0x149a3
lo: 0x201b7c65
vboxnet0: 0x4000
wlan2: 0x6000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0380000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0d00000-d0efffff
Prefetchable memory behind bridge: 00000000d0f00000-00000000d10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0000000-d01fffff
Prefetchable memory behind bridge: 00000000d0b00000-00000000d0cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0700000-d08fffff
Prefetchable memory behind bridge: 00000000d0900000-00000000d0afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f5ffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0644000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789
Gigabit Ethernet PCI Express [14e4:169d] (rev 11)
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
05:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=0a, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f5ffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:02.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 2840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
06:02.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at 2860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
06:02.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
63) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at f4005800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
06:03.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 2880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
06:03.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 61) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 28a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
06:03.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
63) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at f4005900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
06:04.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller
(PHY/Link) [104c:8023]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4005000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:05.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus
Controller [104c:ac50] (rev 02)
Subsystem: Texas Instruments PCI1410 PC card Cardbus Controller
[104c:ac50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: d4000000-d7fff000 (prefetchable)
Memory window 1: f0000000-f3fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:06.0 Modem [0703]: Realtek Semiconductor Co., Ltd. SmartLAN56 56K Modem
[10ec:8197] (prog-if 00 [Generic])
Subsystem: AMBIT Microsystem Corp. Device [1468:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2800 [size=64]
Capabilities: <access denied>
Kernel driver in use: serial
0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller
[104c:8039]
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: d8000000-dbfff000 (prefetchable)
Memory window 1: dc000000-dffff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Acer Incorporated [ALI] Device [1025:0098]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
0b:00.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g
[1814:0302]
Subsystem: D-Link System Inc AirPlus G DWL-G630 Wireless Cardbus
Adapter (rev.E2) [1186:3c08]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:0892 Logitech, Inc. OrbiCam
Bus 009 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard
4000 V1.0
Bus 009 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-686-pae recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.13-7 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii grub-pc 1.99-6 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.30 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
* linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae:
false
linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae:
true
--- End Message ---
