Package: linux-2.6 Version: 3.0.0-3 Severity: serious Hello,
this is on testing, the relevant package versions are: udev 172-1 chromium 13.0.782.220~r99552-1 lvm2 2.02.86-1 This seems to be relevant and contains a patch: https://bugs.archlinux.org/task/24614 This is how I reproduce it: System just booted, chromium NOT running: root@viaza:~# lvcreate -L 1G -n foo viaza Logical volume "foo" created root@viaza:~# lvremove /dev/viaza/foo Do you really want to remove active logical volume foo? [y/n]: y Logical volume "foo" successfully removed After starting chromium: root@viaza:~# lvcreate -L 1G -n foo viaza /dev/mapper/viaza-foo: open failed: No such file or directory /dev/viaza/foo: not found: device not cleared Aborting. Failed to wipe start of new LV. LV viaza/foo in use: not deactivating Unable to deactivate failed new LV. Manual intervention required. After closing chromium: root@viaza:~# lvcreate -L 1G -n bar viaza Logical volume "bar" created After reopening chromium: root@viaza:~# lvcreate -L 1G -n baz viaza /dev/mapper/viaza-baz: open failed: No such file or directory /dev/viaza/baz: not found: device not cleared Aborting. Failed to wipe start of new LV. Unable to deactivate open viaza-baz (254:14) Unable to deactivate failed new LV. Manual intervention required. After closing chromium: root@viaza:~# lvcreate -L 1G -n wibble viaza Logical volume "wibble" created ...and so on. Nothing shows up in dmesg: the version you see attached is taken just after running the sequence of commands above. Chromium is running as a normal user, which means that whatever it is doing can make root unable[1] to create LVM volumes, which sounds to me like a security issue as well. Ciao, Enrico [1] running /etc/init.t/lvm2 restart causes those half-created volumes to show up, but still. -- Package-specific info: ** Version: Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-3.0.0-1-amd64 root=/dev/mapper/viaza-root ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 10.173145] Bluetooth: SCO socket layer initialized [ 10.329770] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 10.329978] usbcore: registered new interface driver btusb [ 10.503476] scsi6 : pata_pcmcia [ 10.503531] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22 [ 10.517882] iwlagn 0000:43:00.0: loaded firmware version 9.221.4.1 build 25532 [ 10.518177] Registered led device: phy0-led [ 10.804002] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.833225] fbcon: inteldrmfb (fb0) is primary device [ 11.216716] Linux media interface: v0.10 [ 11.241662] Linux video capture interface: v2.00 [ 11.266342] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b163) [ 11.304316] input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12 [ 11.304384] usbcore: registered new interface driver uvcvideo [ 11.304385] USB Video Class driver (v1.1.0) [ 12.815400] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting [ 12.896425] Console: switching to colour frame buffer device 160x50 [ 12.898421] fb0: inteldrmfb frame buffer device [ 12.898422] drm: registered panic notifier [ 12.919658] acpi device:0e: registered as cooling_device4 [ 12.919934] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 12.920020] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.920091] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.924343] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 12.924352] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 12.924362] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.924455] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 12.924493] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.007969] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14 [ 13.017426] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0 [ 13.017929] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0 [ 13.034386] input: HDA Intel Line In at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 13.034465] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 13.034541] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 13.034615] input: HDA Intel HP Out at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 13.034787] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 13.034861] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 13.493932] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 14.189098] EXT3-fs (dm-0): using internal journal [ 14.756976] loop: module loaded [ 28.165219] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 28.168150] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni)) [ 28.213232] padlock_aes: VIA PadLock not detected. [ 28.220072] padlock_sha: VIA PadLock Hash Engine not detected. [ 40.613652] Adding 3145724k swap on /dev/mapper/swap. Priority:-1 extents:1 across:3145724k [ 41.973150] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 42.034722] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 42.143870] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 42.196415] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 45.129330] RPC: Registered named UNIX socket transport module. [ 45.129332] RPC: Registered udp transport module. [ 45.129334] RPC: Registered tcp transport module. [ 45.129335] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 45.238839] FS-Cache: Loaded [ 45.300955] FS-Cache: Netfs 'nfs' registered for caching [ 45.336691] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 45.962505] fuse init (API version 7.16) [ 49.184766] Disabling lock debugging due to kernel taint [ 49.189891] vboxdrv: Found 4 processor cores. [ 49.190103] vboxdrv: fAsync=0 offMin=0x1e0 offMax=0x10a9 [ 49.190159] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 49.190162] vboxdrv: Successfully loaded version 4.1.0_Debian (interface 0x00190000). [ 49.305599] vboxpci: IOMMU not found (not registered) [ 49.567653] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input21 [ 52.916995] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 52.969352] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 52.970039] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 53.415558] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 54.602563] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx [ 54.602567] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 54.603190] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 57.442415] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 57.442417] Bluetooth: BNEP filters: protocol multicast [ 57.567932] Bluetooth: RFCOMM TTY layer initialized [ 57.567937] Bluetooth: RFCOMM socket layer initialized [ 57.567938] Bluetooth: RFCOMM ver 1.11 [ 59.810326] lp: driver loaded but no devices found [ 60.132258] ppdev: user-space parallel port driver [ 63.525905] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting [ 65.259948] eth0: no IPv6 routers present [ 87.702623] EXT4-fs (dm-8): re-mounted. Opts: commit=0 [ 87.706485] EXT4-fs (dm-9): re-mounted. Opts: commit=0 [ 87.709811] EXT4-fs (dm-2): re-mounted. Opts: commit=0 [ 87.712834] EXT4-fs (dm-4): re-mounted. Opts: commit=0 [ 128.092859] hda-intel: Invalid position buffer, using LPIB read method instead. [ 128.237143] hda-intel: Invalid position buffer, using LPIB read method instead. [ 128.277542] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 141.373504] wlan0: authenticate with 40:4a:03:57:cd:b8 (try 1) [ 141.375893] wlan0: authenticated [ 141.376009] wlan0: associate with 40:4a:03:57:cd:b8 (try 1) [ 141.379791] wlan0: RX AssocResp from 40:4a:03:57:cd:b8 (capab=0x411 status=0 aid=1) [ 141.379797] wlan0: associated [ 141.386172] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 152.094330] wlan0: no IPv6 routers present [ 242.987040] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null) [ 428.549756] exe (4672): /proc/4672/oom_adj is deprecated, please use /proc/4672/oom_score_adj instead. [ 950.991775] EXT4-fs (dm-11): warning: maximal mount count reached, running e2fsck is recommended [ 950.999877] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null) [ 1211.607652] wlan0: deauthenticating from 40:4a:03:57:cd:b8 by local choice (reason=3) [ 1211.697744] cfg80211: Calling CRDA for country: US ** Model information sys_vendor: Hewlett-Packard product_name: HP EliteBook 2540p product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 68CSU Ver. F.08 board_vendor: Hewlett-Packard board_name: 7008 board_version: KBC Version 38.32 ** Loaded modules: Module Size Used by dm_snapshot 32809 0 acpi_cpufreq 13009 1 mperf 12453 1 acpi_cpufreq cpufreq_stats 12862 0 cpufreq_conservative 13147 0 cpufreq_powersave 12454 0 cpufreq_userspace 12576 0 parport_pc 22395 0 ppdev 12763 0 lp 17270 0 parport 31929 3 parport_pc,ppdev,lp rfcomm 33848 10 bnep 17615 2 pci_stub 12429 1 vboxpci 19059 0 vboxnetadp 13202 0 vboxnetflt 23595 0 vboxdrv 194054 3 vboxpci,vboxnetadp,vboxnetflt uinput 17469 1 fuse 66430 1 nfsd 260662 2 nfs 259369 0 lockd 71503 2 nfsd,nfs fscache 36721 1 nfs auth_rpcgss 37204 2 nfsd,nfs nfs_acl 12511 2 nfsd,nfs sunrpc 172969 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl ext2 63732 1 ext4 313917 5 jbd2 62574 1 ext4 sha256_generic 16797 6 aesni_intel 50644 72 cryptd 14549 25 aesni_intel aes_x86_64 16796 1 aesni_intel aes_generic 33026 2 aesni_intel,aes_x86_64 cbc 12755 0 loop 22711 0 firewire_sbp2 18062 0 dm_crypt 22611 3 kvm_intel 47257 0 kvm 268970 1 kvm_intel snd_hda_codec_hdmi 26321 1 snd_hda_codec_idt 53749 1 uvcvideo 61887 0 videodev 66713 1 uvcvideo media 18184 2 uvcvideo,videodev v4l2_compat_ioctl32 16567 1 videodev arc4 12458 2 pata_pcmcia 16837 1 btusb 17462 2 snd_hda_intel 26140 3 snd_hda_codec 72699 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel bluetooth 114376 23 rfcomm,bnep,btusb snd_hwdep 13186 1 snd_hda_codec snd_pcm 68104 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec crc16 12343 2 ext4,bluetooth iwlagn 166455 0 snd_seq 45208 0 joydev 17262 0 snd_timer 22581 2 snd_pcm,snd_seq snd_seq_device 13137 1 snd_seq mac80211 182631 1 iwlagn snd 52823 15 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 13152 1 snd i915 342883 7 hp_wmi 13329 0 drm_kms_helper 27216 1 i915 drm 163280 3 i915,drm_kms_helper pcmcia 36815 1 pata_pcmcia battery 13109 0 ac 12624 0 snd_page_alloc 13043 2 snd_hda_intel,snd_pcm tpm_infineon 13021 0 sparse_keymap 12795 1 hp_wmi i2c_algo_bit 12850 1 i915 cfg80211 132564 2 iwlagn,mac80211 power_supply 13475 2 battery,ac evdev 17558 22 psmouse 55656 0 yenta_socket 22884 0 pcmcia_rsrc 17567 1 yenta_socket pcmcia_core 18333 3 pcmcia,yenta_socket,pcmcia_rsrc hp_accel 21104 0 lis3lv02d 17911 1 hp_accel i2c_core 23909 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit video 17707 1 i915 intel_ips 17694 0 tpm_tis 13152 0 serio_raw 12846 0 tpm 17819 2 tpm_infineon,tpm_tis rfkill 19080 5 bluetooth,hp_wmi,cfg80211 tpm_bios 12944 1 tpm processor 27942 5 acpi_cpufreq button 12930 1 i915 container 12581 0 input_polldev 12906 1 lis3lv02d pcspkr 12579 0 wmi 13243 1 hp_wmi ext3 114399 1 jbd 43355 1 ext3 mbcache 13066 3 ext2,ext4,ext3 dm_mod 63164 44 dm_snapshot,dm_crypt usbhid 40516 0 hid 73172 1 usbhid sg 25985 0 sr_mod 21811 0 sd_mod 36259 3 cdrom 35093 1 sr_mod crc_t10dif 12348 1 sd_mod mmc_block 22208 0 ahci 25089 2 libahci 22767 1 ahci firewire_ohci 35553 0 sdhci_pci 13304 0 sdhci 26511 1 sdhci_pci mmc_core 63601 2 mmc_block,sdhci firewire_core 48371 2 firewire_sbp2,firewire_ohci crc_itu_t 12347 1 firewire_core ehci_hcd 40090 0 libata 149043 3 pata_pcmcia,ahci,libahci e1000e 124997 0 scsi_mod 162442 5 firewire_sbp2,sg,sr_mod,sd_mod,libata usbcore 128338 5 uvcvideo,btusb,usbhid,ehci_hcd thermal 17426 0 thermal_sys 17949 3 video,processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5058 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d4724000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 5050 [size=8] Region 1: Memory at d472b000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d472a000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5020 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4729000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d4600000-d46fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=42, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: d0600000-d45fffff Prefetchable memory behind bridge: 00000000d4900000-00000000d4afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=43, subordinate=43, sec-latency=0 Memory behind bridge: d0500000-d05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d4728000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=44, subordinate=48, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0400000-d04fffff Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 5048 [size=8] Region 1: I/O ports at 5064 [size=4] Region 2: I/O ports at 5040 [size=8] Region 3: I/O ports at 5060 [size=4] Region 4: I/O ports at 5000 [size=32] Region 5: Memory at d4727000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at d4726000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 43:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35) Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1311] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn 44:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 06) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 44:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 25) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: Memory at d0403000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 44:06.2 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev bb) Subsystem: Hewlett-Packard Company Device [103c:7008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin B routed to IRQ 22 Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=4K] Bus: primary=44, secondary=45, subordinate=48, sec-latency=176 Memory window 0: d8000000-dbfff000 (prefetchable) Memory window 1: dc000000-dffff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:231d Hewlett-Packard Bus 001 Device 004: ID 138a:0007 Validity Sensors, Inc. VFS451 Fingerprint Reader Bus 001 Device 005: ID 04f2:b163 Chicony Electronics Co., Ltd Bus 002 Device 003: ID 03f0:2514 Hewlett-Packard Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.40 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.3 ii module-init-tools 3.16-1 Versions of packages linux-image-3.0.0-1-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.0.0-1-amd64 suggests: pn grub-pc 1.99-12 pn linux-doc-3.0.0 <none> Versions of packages linux-image-3.0.0-1-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi 0.33 pn firmware-linux 0.33 pn firmware-linux-nonfree 0.33 pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64: linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110919192703.3948.75590.report...@viaza.enricozini.org
