Your message dated Sat, 17 Sep 2011 14:25:34 -0500
with message-id <20110917192534.GC5657@elie>
and subject line Re: linux-image-2.6.32-5-amd64: General protection fault
has caused the Debian Bug report #631843,
regarding linux-image-2.6.32-5-amd64: General protection fault
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
631843: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631843
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-35
Severity: critical
Tags: upstream
Justification: breaks the whole system
This problem came after updating the kernel to the latest Debian release
which was released this weekend. There were to general protection faults
before the system become inaccesible. The relevant parts from the syslog
are found at the end.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=6ac1c9b1-47c2-4d3c-97cd-8fff337fda02 ro quiet
** Not tainted
** Kernel log:
[ 3.868815] EXT3-fs: write access will be enabled during recovery.
[ 4.740473] kjournald starting. Commit interval 5 seconds
[ 4.740493] EXT3-fs: recovery complete.
[ 4.741526] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.843724] udev[472]: starting version 164
[ 6.025630] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 6.025638] ACPI: Power Button [PWRB]
[ 6.025703] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.025707] ACPI: Power Button [PWRF]
[ 6.039332] processor LNXCPU:00: registered as cooling_device0
[ 6.039367] processor LNXCPU:01: registered as cooling_device1
[ 6.039404] processor LNXCPU:02: registered as cooling_device2
[ 6.039440] processor LNXCPU:03: registered as cooling_device3
[ 6.165344] EDAC MC: Ver: 2.1.0 Jun 14 2011
[ 6.165707] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.167283] parport_pc 00:0b: reported by Plug and Play ACPI
[ 6.167311] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 6.222762] EDAC MC0: Giving out device to 'i3200_edac' 'i3200': DEV
0000:00:00.0
[ 6.360906] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 6.497124] [drm] Initialized drm 1.1.0 20060810
[ 6.497246] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.552367] [drm] radeon kernel modesetting enabled.
[ 6.552415] radeon 0000:01:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.554009] [drm] radeon: Initializing kernel modesetting.
[ 6.554212] [drm] register mmio base: 0xD8000000
[ 6.554214] [drm] register mmio size: 65536
[ 6.554843] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 6.554859] [drm] radeon: VRAM 64M
[ 6.554860] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 6.554862] [drm] radeon: GTT 512M
[ 6.554863] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 6.554880] [drm] radeon: irq initialized.
[ 6.554887] mtrr: type mismatch for d0000000,8000000 old: write-back new:
write-combining
[ 6.554889] [drm] Detected VRAM RAM=64M, BAR=128M
[ 6.554890] [drm] RAM width 16bits DDR
[ 6.554943] [TTM] Zone kernel: Available graphics memory: 2031128 kiB.
[ 6.554966] [drm] radeon: 64M of VRAM memory ready
[ 6.554969] [drm] radeon: 512M of GTT memory ready.
[ 6.554990] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.566477] [drm] radeon: cp idle (0x00008080)
[ 6.566516] [drm] Loading R100 Microcode
[ 6.566791] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 6.632626] radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[ 6.632707] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 6.632784] radeon 0000:01:07.0: failled initializing CP (-2).
[ 6.632858] radeon 0000:01:07.0: Disabling GPU acceleration
[ 6.632933] [drm] radeon: cp finalized
[ 6.633328] [drm] Radeon Display Connectors
[ 6.633330] [drm] Connector 0:
[ 6.633331] [drm] VGA
[ 6.633333] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 6.633334] [drm] Encoders:
[ 6.633335] [drm] CRT1: INTERNAL_DAC1
[ 6.760927] [drm] fb mappable at 0xD0040000
[ 6.760929] [drm] vram apper at 0xD0000000
[ 6.760930] [drm] size 1996800
[ 6.760932] [drm] fb depth is 8
[ 6.760933] [drm] pitch is 1664
[ 6.932004] Console: switching to colour frame buffer device 200x75
[ 6.950219] fb0: radeondrmfb frame buffer device
[ 6.950221] registered panic notifier
[ 6.950226] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:07.0 on
minor 0
[ 9.176036] floppy0: no floppy controllers found
[ 9.563871] Adding 9767512k swap on /dev/sda2. Priority:-1 extents:1
across:9767512k
[ 9.600253] Adding 9767512k swap on /dev/sdb2. Priority:-2 extents:1
across:9767512k
[ 9.706258] EXT3 FS on md0, internal journal
[ 9.780615] loop: module loaded
[ 9.810312] coretemp coretemp.0: Using relative temperature scale!
[ 9.810357] coretemp coretemp.1: Using relative temperature scale!
[ 9.810402] coretemp coretemp.2: Using relative temperature scale!
[ 9.810891] coretemp coretemp.3: Using relative temperature scale!
[ 27.606356] kjournald starting. Commit interval 5 seconds
[ 27.606637] EXT3 FS on sdc1, internal journal
[ 27.606642] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.648594] kjournald starting. Commit interval 5 seconds
[ 27.652248] EXT3 FS on dm-4, internal journal
[ 27.652253] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.696018] kjournald starting. Commit interval 5 seconds
[ 27.696285] EXT3 FS on dm-3, internal journal
[ 27.696289] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.732903] kjournald starting. Commit interval 5 seconds
[ 27.737213] EXT3 FS on dm-2, internal journal
[ 27.737218] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.756209] kjournald starting. Commit interval 5 seconds
[ 27.760269] EXT3 FS on dm-1, internal journal
[ 27.760274] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.805293] kjournald starting. Commit interval 5 seconds
[ 27.809252] EXT3 FS on dm-0, internal journal
[ 27.809256] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.017720] e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
[ 29.073610] e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
[ 29.074221] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.027778] fuse init (API version 7.13)
[ 30.529377] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 30.529380] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 30.529939] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.728518] eth0: no IPv6 routers present
[ 42.159602] [drm:r100_bandwidth_update] *ERROR* You may not have enough
display bandwidth for current mode
[ 42.159605] If you have flickering problem, try to lower resolution, refresh
rate, or color depth
[ 4794.299811] Software Watchdog Timer: 0.07 initialized. soft_noboot=0
soft_margin=60 sec (nowayout= 0)
** Model information
sys_vendor: FUJITSU
product_name: PRIMERGY TX100 S1
product_version:
chassis_vendor: FUJITSU
chassis_version: TX100S1F2
bios_vendor: FUJITSU // Phoenix Technologies Ltd.
bios_version: 6.00 R1.04.2679.B1
board_vendor: FUJITSU
board_name: D2679-B1
board_version: S26361-D2679-Bxx WGSxx GSxx
** Loaded modules:
Module Size Used by
softdog 2896 2
binfmt_misc 6431 1
fuse 50892 1
coretemp 4325 0
loop 11799 0
radeon 574844 2
ttm 40146 1 radeon
drm_kms_helper 20369 1 radeon
drm 142327 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
snd_pcm 60503 0
snd_timer 15582 1 snd_pcm
snd 46526 2 snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6249 1 snd_pcm
i2c_i801 7830 0
i3200_edac 2671 0
i2c_core 15819 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
parport_pc 18855 0
pcspkr 1699 0
edac_core 29261 2 i3200_edac
parport 27954 1 parport_pc
evdev 7352 10
container 2389 0
processor 29935 0
button 4650 0
ext3 106630 7
jbd 37085 1 ext3
mbcache 5050 1 ext3
dm_mod 53706 15
raid1 18431 2
md_mod 73872 3 raid1
sg 24069 0
usbhid 33292 0
hid 63257 1 usbhid
sd_mod 29921 10
sr_mod 12602 0
crc_t10dif 1276 1 sd_mod
cdrom 29415 1 sr_mod
uhci_hcd 18521 0
ehci_hcd 32081 0
ata_generic 3239 0
thermal 11674 0
ata_piix 21124 7
libata 133760 2 ata_generic,ata_piix
thermal_sys 11942 2 processor,thermal
scsi_mod 126517 4 sg,sd_mod,sr_mod,libata
e1000e 110063 0
usbcore 122498 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.20
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 212.112.166.18
dns-search grimsta.fro.se
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 100
link/ether 00:19:99:6e:89:23 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.20/24 brd 192.168.1.255 scope global eth0
inet6 fe80::219:99ff:fe6e:8923/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 2576425 6252 0 0 0 0 0 0 2576425
6252 0 0 0 0 0 0
eth0: 6261831 22348 0 0 0 0 0 0 6959832
21565 0 0 0 0 0 0
*** Protocol statistics:
Ip:
27479 total packets received
0 forwarded
0 incoming packets discarded
27479 incoming packets delivered
24648 requests sent out
Icmp:
968 ICMP messages received
41 input ICMP message failed.
ICMP input histogram:
destination unreachable: 187
echo requests: 126
echo replies: 655
1103 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 189
echo request: 788
echo replies: 126
IcmpMsg:
InType0: 655
InType3: 187
InType8: 126
OutType0: 126
OutType3: 189
OutType8: 788
Tcp:
1073 active connections openings
631 passive connection openings
529 failed connection attempts
309 connection resets received
6 connections established
18650 segments received
15617 segments send out
67 segments retransmited
0 bad segments received.
760 resets sent
Udp:
8410 packets received
3 packets to unknown port received.
0 packet receive errors
8413 packets sent
UdpLite:
TcpExt:
4 resets received for embryonic SYN_RECV sockets
226 TCP sockets finished time wait in fast timer
260 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 5 times
2888 packets directly queued to recvmsg prequeue.
2908 bytes directly in process context from backlog
534137 bytes directly received in process context from prequeue
5132 packet headers predicted
1311 packets header predicted and directly queued to user
2553 acknowledgments not containing data payload received
4715 predicted acknowledgments
5 congestion windows recovered without slow start after partial ack
3 retransmits in slow start
41 other TCP timeouts
5 DSACKs sent for old packets
9 DSACKs received
228 connections reset due to unexpected data
21 connections reset due to early user close
TCPDSACKIgnoredOld: 4
TCPDSACKIgnoredNoUndo: 2
IpExt:
InOctets: 8444976
OutOctets: 9066205
*** Device features:
eth0: 0x9a9
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3200/3210 Chipset DRAM Controller
[8086:29f0] (rev 01)
Subsystem: Fujitsu Technology Solutions Device [1734:1101]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: i3200_edac
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network
Connection [8086:10bd] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:10fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at d8300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d8320000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d8321000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d8321400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d8000000-d80fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller [8086:2916] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c30 [size=16]
Region 5: I/O ports at 1c20 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d8321800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Fujitsu Technology Solutions Device [1734:10e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1c88 [size=8]
Region 1: I/O ports at 1c7c [size=4]
Region 2: I/O ports at 1c80 [size=8]
Region 3: I/O ports at 1c78 [size=4]
Region 4: I/O ports at 1c50 [size=16]
Region 5: I/O ports at 1c40 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:07.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000
[1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:1122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 005: ID 10d5:55a4 Uni Class Technology Co., Ltd
Bus 004 Device 004: ID 413c:3200 Dell Computer Corp. Mouse
Bus 004 Device 003: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 004 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-35 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
First instance:
Jun 26 02:11:00 server master[2089]: process 12847 exited, status 0
Jun 26 02:11:05 server kernel: [25987.488029] general protection fault: 0000
[#1] SMP
Jun 26 02:11:05 server kernel: [25987.488035] last sysfs file:
/sys/devices/platform/coretemp.3/temp1_input
Jun 26 02:11:05 server kernel: [25987.488038] CPU 3
Jun 26 02:11:05 server kernel: [25987.488040] Modules linked in: binfmt_misc
fuse coretemp loop radeon ttm drm_kms_helper snd_pcm snd_timer drm snd
soundcore i2c_i801 i2c_algo_bit i2c_core snd_page_alloc parport_pc parport
pcspkr i3200_edac evdev container button edac_core processor ext3 jbd mbcache
dm_mod raid1 md_mod sg sr_mod sd_mod cdrom crc_t10dif ata_generic uhci_hcd
ata_piix ehci_hcd libata scsi_mod thermal thermal_sys usbcore nls_base e1000e
[last unloaded: scsi_wait_scan]
Jun 26 02:11:05 server kernel: [25987.488089] Pid: 1455, comm: hald-addon-stor
Not tainted 2.6.32-5-amd64 #1 PRIMERGY TX100 S1
Jun 26 02:11:05 server kernel: [25987.488092] RIP: 0010:[<ffffffff810e7f8c>]
[<ffffffff810e7f8c>] __kmalloc+0xd2/0x141
Jun 26 02:11:05 server kernel: [25987.488103] RSP: 0018:ffff88017dafba18
EFLAGS: 00010002
Jun 26 02:11:05 server kernel: [25987.488106] RAX: 0000000000000000 RBX:
0006de4b0006de4a RCX: 0000000000000008
Jun 26 02:11:05 server kernel: [25987.488109] RDX: ffff880005392090 RSI:
00000000000080d0 RDI: ffffffffa009b4ce
Jun 26 02:11:05 server kernel: [25987.488112] RBP: 0000000000000246 R08:
ffff88017de74008 R09: 0000000000000000
Jun 26 02:11:05 server kernel: [25987.488116] R10: 000000000000000b R11:
ffff88017f032e80 R12: ffffffff81453f10
Jun 26 02:11:05 server kernel: [25987.488119] R13: 00000000000080d0 R14:
00000000000080d0 R15: 0000000000000008
Jun 26 02:11:05 server kernel: [25987.488123] FS: 00007f26209e6700(0000)
GS:ffff880005380000(0000) knlGS:0000000000000000
Jun 26 02:11:05 server kernel: [25987.488131] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
Jun 26 02:11:05 server kernel: [25987.488133] CR2: 00007fff6dfa8028 CR3:
000000017db79000 CR4: 00000000000006e0
Jun 26 02:11:05 server kernel: [25987.488135] DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jun 26 02:11:05 server kernel: [25987.488137] DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jun 26 02:11:05 server kernel: [25987.488140] Process hald-addon-stor (pid:
1455, threadinfo ffff88017dafa000, task ffff88017ca8aa60)
Jun 26 02:11:05 server kernel: [25987.488142] Stack:
Jun 26 02:11:05 server kernel: [25987.488143] 0000000300000292
ffffffffa009b4ce 000000087ca8ad58 ffff88017ca1b4b0
Jun 26 02:11:05 server kernel: [25987.488146] <0> ffff88017ca1b480
0000000000000000 00000000ffffffea ffff88017f4249c0
Jun 26 02:11:05 server kernel: [25987.488150] <0> ffff88017f4249e0
ffffffffa009b4ce 0000000000000296 ffff88017dafba98
Jun 26 02:11:05 server kernel: [25987.488154] Call Trace:
Jun 26 02:11:05 server kernel: [25987.488159] [<ffffffffa009b4ce>] ?
sr_media_change+0x46/0x27a [sr_mod]
Jun 26 02:11:05 server kernel: [25987.488163] [<ffffffffa009b4ce>] ?
sr_media_change+0x46/0x27a [sr_mod]
Jun 26 02:11:05 server kernel: [25987.488167] [<ffffffff81067bdf>] ?
hrtimer_cancel+0xc/0x16
Jun 26 02:11:05 server kernel: [25987.488171] [<ffffffff812fbbaf>] ?
schedule_hrtimeout_range+0xd5/0x112
Jun 26 02:11:05 server kernel: [25987.488175] [<ffffffffa004e074>] ?
media_changed+0x42/0x74 [cdrom]
Jun 26 02:11:05 server kernel: [25987.488179] [<ffffffff81111b6e>] ?
check_disk_change+0x22/0x53
Jun 26 02:11:05 server kernel: [25987.488183] [<ffffffffa005284c>] ?
cdrom_open+0x8d2/0x962 [cdrom]
Jun 26 02:11:05 server kernel: [25987.488187] [<ffffffff810fbe02>] ?
do_sys_poll+0x316/0x391
Jun 26 02:11:05 server kernel: [25987.488190] [<ffffffff810fcaaf>] ?
__pollwait+0x0/0xd6
Jun 26 02:11:05 server kernel: [25987.488193] [<ffffffff810fcb85>] ?
pollwake+0x0/0x5b
Jun 26 02:11:05 server kernel: [25987.488195] [<ffffffff810fcb85>] ?
pollwake+0x0/0x5b
Jun 26 02:11:05 server kernel: [25987.488199] [<ffffffff8118f973>] ?
kobject_get+0x12/0x17
Jun 26 02:11:05 server kernel: [25987.488203] [<ffffffff81184760>] ?
get_disk+0x95/0xb4
Jun 26 02:11:05 server kernel: [25987.488207] [<ffffffff81222d44>] ?
kobj_lookup+0x169/0x1a1
Jun 26 02:11:05 server kernel: [25987.488209] [<ffffffff8118f973>] ?
kobject_get+0x12/0x17
Jun 26 02:11:05 server kernel: [25987.488213] [<ffffffffa009b464>] ?
sr_block_open+0x86/0x9f [sr_mod]
Jun 26 02:11:05 server kernel: [25987.488216] [<ffffffff8111287f>] ?
__blkdev_get+0xc6/0x342
Jun 26 02:11:05 server kernel: [25987.488219] [<ffffffff81112b02>] ?
blkdev_open+0x0/0x96
Jun 26 02:11:05 server kernel: [25987.488222] [<ffffffff81112b69>] ?
blkdev_open+0x67/0x96
Jun 26 02:11:05 server kernel: [25987.488225] [<ffffffff810ed45a>] ?
__dentry_open+0x19d/0x2bf
Jun 26 02:11:05 server kernel: [25987.488228] [<ffffffff810f8cbb>] ?
do_filp_open+0x4e4/0x94b
Jun 26 02:11:05 server kernel: [25987.488232] [<ffffffffa004fecd>] ?
cdrom_release+0x1ae/0x1fe [cdrom]
Jun 26 02:11:05 server kernel: [25987.488236] [<ffffffff81097c96>] ?
rcu_start_gp+0x197/0x1c0
Jun 26 02:11:05 server kernel: [25987.488240] [<ffffffff8101657d>] ?
read_tsc+0xa/0x20
Jun 26 02:11:05 server kernel: [25987.488244] [<ffffffff81101d0d>] ?
alloc_fd+0x67/0x10c
Jun 26 02:11:05 server kernel: [25987.488246] [<ffffffff810ed1eb>] ?
do_sys_open+0x55/0xfc
Jun 26 02:11:05 server kernel: [25987.488249] [<ffffffff81010b42>] ?
system_call_fastpath+0x16/0x1b
Jun 26 02:11:05 server kernel: [25987.488251] Code: fa 66 0f 1f 44 00 00 65 8b
04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a
48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44
89 ee 83
Jun 26 02:11:05 server kernel: [25987.488278] RIP [<ffffffff810e7f8c>]
__kmalloc+0xd2/0x141
Jun 26 02:11:05 server kernel: [25987.488281] RSP <ffff88017dafba18>
Jun 26 02:11:05 server kernel: [25987.488284] ---[ end trace e28e02868d65ae51
]---
Jun 26 02:12:01 server /USR/SBIN/CRON[12956]: (root) CMD ([ -x
/root/bin/get_picture ] && /root/bin/get_picture > /dev/null 2>&1)
Second instance, after which the PC was inaccesible:
Jun 26 07:54:29 server rsyslogd: [origin software="rsyslogd" swVersion="4.6.4"
x-pid="1353" x-info="http://www.rsyslog.com";] rsyslogd was HUPed, type
'lightweight'.
Jun 26 07:54:30 server kernel: [46593.029539] general protection fault: 0000
[#2] SMP
Jun 27 16:47:18 server kernel: imklog 4.6.4, log source = /proc/kmsg started.
--- End Message ---
--- Begin Message ---
Thomas Nilsson wrote:
> I was not able to get the server up and running today. I doesn't matter
> if I try to boot from USB-stick, ordinary HD or not even the original
> diagnostic Windows DVD! The machine boot but when it, I think, starts
> the SMP or something like that it crashes...
>
> So right now I consider this a HW problem. The BIOS beeps 5 time which
> might indicate a Processor error (Given that it is an AMI BIOS...)
>
> Thank you very very much for taking your time trying to help me out!!!
Thanks; closing (but please do keep us posted).
Cheers,
Jonathan
> BR
>
> /Thomas
>
> PS I will let you know the rest of the story DS
--- End Message ---
