Linus Walleij <linus.wall...@stericsson.com> writes:
Hi,
> From: Linus Walleij <linus.wall...@linaro.org>
>
> This rewrites the U300 GPIO so as to use gpiolib and
> struct gpio_chip instead of just generic GPIO, hiding
> all the platform specifics and passing in GPIO chip
> variant as platform data at runtime instead of the
> compiletime kludges.
>
> Cc: Russell King <li...@arm.linux.org.uk>
> Cc: Grant Likely <grant.lik...@secretlab.ca>
> Cc: Debian kernel maintainers <debian-kernel@lists.debian.org>
> Reported-by: Ben Hutchings <b...@decadent.org.uk>
> Signed-off-nu: Linus Walleij <linus.wall...@linaro.org>
> ---
> First I though that I had to have runtime pin configuration
> to solve this, but it turns out that all users of the config
> functionality were inside the U300 GPIO driver itself, so
> I just made that functionality private to the driver.
>
> This solves the problem observed by Ben Hutchings that some
> touchscreen input devices wouldn't work with certain ARM
> machines still using just generic GPIO.
>
> This is based on top of the pending GPIO cleanups in Russells
> tree, if I can get some ACK on this I presume Russell can
> apply it to his branch.
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/mach-u300/Kconfig | 1 +
> arch/arm/mach-u300/core.c | 31 +-
> arch/arm/mach-u300/include/mach/gpio-u300.h | 149 +---
> arch/arm/mach-u300/include/mach/gpio.h | 40 +-
> arch/arm/mach-u300/include/mach/irqs.h | 25 +-
> drivers/gpio/Kconfig | 9 +
> drivers/gpio/gpio-u300.c | 1191
> ++++++++++++++++-----------
> 8 files changed, 795 insertions(+), 652 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f23712d..3f38a7f 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -831,6 +831,7 @@ config ARCH_U300
> select CLKDEV_LOOKUP
> select HAVE_MACH_CLKDEV
> select GENERIC_GPIO
> + select ARCH_REQUIRE_GPIOLIB
> help
> Support for ST-Ericsson U300 series mobile platforms.
>
> diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
> index 966a5a0..39e077e 100644
> --- a/arch/arm/mach-u300/Kconfig
> +++ b/arch/arm/mach-u300/Kconfig
> @@ -6,6 +6,7 @@ comment "ST-Ericsson Mobile Platform Products"
>
> config MACH_U300
> bool "U300"
> + select GPIO_U300
>
> comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
>
> diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
> index 724037e..2f1d758 100644
> --- a/arch/arm/mach-u300/core.c
> +++ b/arch/arm/mach-u300/core.c
> @@ -38,6 +38,7 @@
> #include <mach/hardware.h>
> #include <mach/syscon.h>
> #include <mach/dma_channels.h>
> +#include <mach/gpio-u300.h>
>
> #include "clock.h"
> #include "mmc.h"
> @@ -223,7 +224,7 @@ static struct resource gpio_resources[] = {
> .end = IRQ_U300_GPIO_PORT2,
> .flags = IORESOURCE_IRQ,
> },
> -#ifdef U300_COH901571_3
> +#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
> {
> .name = "gpio3",
> .start = IRQ_U300_GPIO_PORT3,
> @@ -236,6 +237,7 @@ static struct resource gpio_resources[] = {
> .end = IRQ_U300_GPIO_PORT4,
> .flags = IORESOURCE_IRQ,
> },
> +#endif
hmm.. silly question: Now that u300 gpios can/will be added through
gpiochip_add, is it still required to used #ifdef instead of
machine_is_foo() or use some different platform devices for that like it
was done on mxc ?
> #ifdef CONFIG_MACH_U300_BS335
> {
> .name = "gpio5",
> @@ -250,7 +252,6 @@ static struct resource gpio_resources[] = {
> .flags = IORESOURCE_IRQ,
> },
> #endif /* CONFIG_MACH_U300_BS335 */
> -#endif /* U300_COH901571_3 */
> };
>
> static struct resource keypad_resources[] = {
> @@ -1495,11 +1496,35 @@ static struct platform_device i2c1_device = {
> .resource = i2c1_resources,
> };
>
> +/*
> + * The different variants have a few different versions of the
> + * GPIO block, with different number of ports.
> + */
> +static struct u300_gpio_platform u300_gpio_plat = {
> +#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
> + .variant = U300_GPIO_COH901335,
> + .ports = 3,
> +#endif
> +#ifdef CONFIG_MACH_U300_BS335
> + .variant = U300_GPIO_COH901571_3_BS335,
> + .ports = 7,
> +#endif
> +#ifdef CONFIG_MACH_U300_BS365
> + .variant = U300_GPIO_COH901571_3_BS365,
> + .ports = 5,
> +#endif
> + .gpio_base = 0,
> + .gpio_irq_base = IRQ_U300_GPIO_BASE,
> +};
> +
> static struct platform_device gpio_device = {
> .name = "u300-gpio",
> .id = -1,
> .num_resources = ARRAY_SIZE(gpio_resources),
> .resource = gpio_resources,
> + .dev = {
> + .platform_data = &u300_gpio_plat,
> + },
> };
>
> static struct platform_device keypad_device = {
> @@ -1596,7 +1621,7 @@ void __init u300_init_irq(void)
> BUG_ON(IS_ERR(clk));
> clk_enable(clk);
>
> - for (i = 0; i < NR_IRQS; i++)
> + for (i = 0; i < U300_VIC_IRQS_END; i++)
> set_bit(i, (unsigned long *) &mask[0]);
> vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
> vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
> diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h
> b/arch/arm/mach-u300/include/mach/gpio-u300.h
> index a611906..0c2b202 100644
> --- a/arch/arm/mach-u300/include/mach/gpio-u300.h
> +++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
> @@ -9,132 +9,6 @@
> #ifndef __MACH_U300_GPIO_U300_H
> #define __MACH_U300_GPIO_U300_H
>
> -#include <linux/kernel.h>
> -#include <linux/io.h>
> -#include <mach/hardware.h>
> -#include <asm/irq.h>
> -
> -/* Switch type depending on platform/chip variant */
> -#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
> -#define U300_COH901335
> -#endif
> -#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
> -#define U300_COH901571_3
> -#endif
> -
> -/* Get base address for regs here */
> -#include "u300-regs.h"
> -/* IRQ numbers */
> -#include "irqs.h"
> -
> -/*
> - * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
> - * used for anything, and often is. The event/enable etc figures are for
> - * the lowermost pin (pin 0 on each port), shift this left to match your
> - * pin if you're gonna use these values.
> - */
> -#ifdef U300_COH901335
> -#define U300_GPIO_PORTX_SPACING (0x1C)
> -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
> -#define U300_GPIO_PXPDIR (0x00)
> -#define U300_GPIO_PXPDOR (0x00)
> -/* Port X Pin Config Register 32bit (R/W) */
> -#define U300_GPIO_PXPCR (0x04)
> -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
> -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
> -/* Port X Interrupt Event Register 32bit (R/W) */
> -#define U300_GPIO_PXIEV (0x08)
> -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
> -/* Port X Interrupt Enable Register 32bit (R/W) */
> -#define U300_GPIO_PXIEN (0x0C)
> -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
> -/* Port X Interrupt Force Register 32bit (R/W) */
> -#define U300_GPIO_PXIFR (0x10)
> -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
> -/* Port X Interrupt Config Register 32bit (R/W) */
> -#define U300_GPIO_PXICR (0x14)
> -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
> -/* Port X Pull-up Enable Register 32bit (R/W) */
> -#define U300_GPIO_PXPER (0x18)
> -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
> -/* Control Register 32bit (R/W) */
> -#define U300_GPIO_CR (0x54)
> -#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
> -/* three ports of 8 bits each = GPIO pins 0..23 */
> -#define U300_GPIO_NUM_PORTS 3
> -#define U300_GPIO_PINS_PER_PORT 8
> -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS
> - 1)
> -#endif
> -
> -#ifdef U300_COH901571_3
> -/*
> - * Control Register 32bit (R/W)
> - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
> - * gives the number of GPIO pins.
> - * bit 8-2 (mask 0x000001FC) contains the core version ID.
> - */
> -#define U300_GPIO_CR (0x00)
> -#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
> -#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
> -#define U300_GPIO_PORTX_SPACING (0x30)
> -/* Port X Pin Data INPUT Register 32bit (R/W) */
> -#define U300_GPIO_PXPDIR (0x04)
> -/* Port X Pin Data OUTPUT Register 32bit (R/W) */
> -#define U300_GPIO_PXPDOR (0x08)
> -/* Port X Pin Config Register 32bit (R/W) */
> -#define U300_GPIO_PXPCR (0x0C)
> -#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
> -#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
> -#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
> -/* Port X Pull-up Enable Register 32bit (R/W) */
> -#define U300_GPIO_PXPER (0x10)
> -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
> -/* Port X Interrupt Event Register 32bit (R/W) */
> -#define U300_GPIO_PXIEV (0x14)
> -#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
> -/* Port X Interrupt Enable Register 32bit (R/W) */
> -#define U300_GPIO_PXIEN (0x18)
> -#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
> -/* Port X Interrupt Force Register 32bit (R/W) */
> -#define U300_GPIO_PXIFR (0x1C)
> -#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
> -#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
> -/* Port X Interrupt Config Register 32bit (R/W) */
> -#define U300_GPIO_PXICR (0x20)
> -#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
> -#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
> -#ifdef CONFIG_MACH_U300_BS335
> -/* seven ports of 8 bits each = GPIO pins 0..55 */
> -#define U300_GPIO_NUM_PORTS 7
> -#else
> -/* five ports of 8 bits each = GPIO pins 0..39 */
> -#define U300_GPIO_NUM_PORTS 5
> -#endif
> -#define U300_GPIO_PINS_PER_PORT 8
> -#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
> -#endif
> -
> /*
> * Individual pin assignments for the B26/S26. Notice that the
> * actual usage of these pins depends on the PAD MUX settings, that
> @@ -250,4 +124,27 @@
>
> #endif
>
> +/**
> + * enum u300_gpio_variant - the type of U300 GPIO employed
> + */
> +enum u300_gpio_variant {
> + U300_GPIO_COH901335,
> + U300_GPIO_COH901571_3_BS335,
> + U300_GPIO_COH901571_3_BS365,
> +};
> +
> +/**
> + * struct u300_gpio_platform - U300 GPIO platform data
> + * @variant: IP block variant
> + * @ports: number of GPIO block ports
> + * @gpio_base: first GPIO number for this block (use a free range)
> + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
> + */
> +struct u300_gpio_platform {
> + enum u300_gpio_variant variant;
> + u8 ports;
> + int gpio_base;
> + int gpio_irq_base;
> +};
> +
> #endif /* __MACH_U300_GPIO_U300_H */
> diff --git a/arch/arm/mach-u300/include/mach/gpio.h
> b/arch/arm/mach-u300/include/mach/gpio.h
> index 430a054..ba224b5 100644
> --- a/arch/arm/mach-u300/include/mach/gpio.h
> +++ b/arch/arm/mach-u300/include/mach/gpio.h
> @@ -13,35 +13,15 @@
> #ifndef __MACH_U300_GPIO_H
> #define __MACH_U300_GPIO_H
>
> -#define __ARM_GPIOLIB_COMPLEX
> +#include <linux/io.h>
> +#include <mach/hardware.h>
> +#include <asm/irq.h>
> +#include <asm-generic/gpio.h>
>
> -/* These can be found in arch/arm/mach-u300/gpio.c */
> -extern int gpio_is_valid(int number);
> -extern int gpio_request(unsigned gpio, const char *label);
> -extern void gpio_free(unsigned gpio);
> -extern int gpio_direction_input(unsigned gpio);
> -extern int gpio_direction_output(unsigned gpio, int value);
> -extern int gpio_register_callback(unsigned gpio,
> - int (*func)(void *arg),
> - void *);
> -extern int gpio_unregister_callback(unsigned gpio);
> -extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
> -extern void disable_irq_on_gpio_pin(unsigned gpio);
> -extern void gpio_pullup(unsigned gpio, int value);
> -extern int gpio_get_value(unsigned gpio);
> -extern void gpio_set_value(unsigned gpio, int value);
> +/* Map these overrides to gpiolib functions, simply */
> +#define gpio_get_value __gpio_get_value
> +#define gpio_set_value __gpio_set_value
> +#define gpio_cansleep __gpio_cansleep
> +#define gpio_to_irq __gpio_to_irq
>
> -#define gpio_get_value_cansleep gpio_get_value
> -#define gpio_set_value_cansleep gpio_set_value
> -
> -/* translates a pin number to a port number */
> -#define PIN_TO_PORT(val) (val >> 3)
> -
> -/* wrappers to sleep-enable the previous two functions */
> -static inline unsigned gpio_to_irq(unsigned gpio)
> -{
> - return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
> -}
> -#define gpio_to_irq gpio_to_irq
> -
> -#endif /* __MACH_U300_GPIO_H */
> +#endif
> diff --git a/arch/arm/mach-u300/include/mach/irqs.h
> b/arch/arm/mach-u300/include/mach/irqs.h
> index 09b1b28..d270fea 100644
> --- a/arch/arm/mach-u300/include/mach/irqs.h
> +++ b/arch/arm/mach-u300/include/mach/irqs.h
> @@ -72,7 +72,7 @@
>
> /* DB3150 and DB3200 have only 45 IRQs */
> #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
> -#define U300_NR_IRQS 45
> +#define U300_VIC_IRQS_END 45
> #endif
>
> /* The DB3350-specific interrupt lines */
> @@ -88,7 +88,7 @@
> #define IRQ_U300_GPIO_PORT4 53
> #define IRQ_U300_GPIO_PORT5 54
> #define IRQ_U300_GPIO_PORT6 55
> -#define U300_NR_IRQS 56
> +#define U300_VIC_IRQS_END 56
> #endif
>
> /* The DB3210-specific interrupt lines */
> @@ -106,16 +106,25 @@
> #define IRQ_U300_NFIF 45
> #define IRQ_U300_NFIF2 46
> #define IRQ_U300_SYSCON_PLL_LOCK 47
> -#define U300_NR_IRQS 48
> +#define U300_VIC_IRQS_END 48
> #endif
>
> -#ifdef CONFIG_AB3550_CORE
> -#define IRQ_AB3550_BASE (U300_NR_IRQS)
> -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
> +/* Maximum 8*7 GPIO lines */
> +#ifdef CONFIG_GPIO_U300
> +#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
> +#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
> +#else
> +#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
> +#endif
>
> -#define NR_IRQS (IRQ_AB3550_END + 1)
> +/* Optional AB3550 mixsig chip */
> +#ifdef CONFIG_AB3550_CORE
> +#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
> +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
> #else
> -#define NR_IRQS U300_NR_IRQS
> +#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
> #endif
>
> +#define NR_IRQS (IRQ_AB3550_END)
> +
> #endif
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index d539efd..4caa3d3 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -178,6 +178,15 @@ config GPIO_SCH
> The Intel Tunnel Creek processor has 5 GPIOs powered by the
> core power rail and 9 from suspend power supply.
>
> +config GPIO_U300
> + bool "ST-Ericsson U300 COH 901 335/571 GPIO"
> + depends on GPIOLIB && ARCH_U300
> + help
> + Say yes here to support GPIO interface on ST-Ericsson U300.
> + The names of the two IP block variants supported are
> + COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
> + ports of 8 GPIO pins each.
> +
> config GPIO_VX855
> tristate "VIA VX855/VX875 GPIO"
> depends on MFD_SUPPORT && PCI
> diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
> index 92f2b8c..8e011d5 100644
> --- a/drivers/gpio/gpio-u300.c
> +++ b/drivers/gpio/gpio-u300.c
> @@ -1,18 +1,17 @@
> /*
> * U300 GPIO module.
> *
> - * Copyright (C) 2007-2009 ST-Ericsson AB
> + * Copyright (C) 2007-2011 ST-Ericsson AB
> * License terms: GNU General Public License (GPL) version 2
> * This can driver either of the two basic GPIO cores
> * available in the U300 platforms:
> * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
> * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
> - * Notice that you also have inline macros in <asm-arch/gpio.h>
> - * Author: Linus Walleij <linus.wall...@stericsson.com>
> + * Author: Linus Walleij <linus.wall...@linaro.org>
> * Author: Jonas Aaberg <jonas.ab...@stericsson.com>
> - *
> */
> #include <linux/module.h>
> +#include <linux/irq.h>
> #include <linux/interrupt.h>
> #include <linux/delay.h>
> #include <linux/errno.h>
> @@ -21,678 +20,900 @@
> #include <linux/err.h>
> #include <linux/platform_device.h>
> #include <linux/gpio.h>
> +#include <linux/list.h>
> +#include <linux/slab.h>
> #include <mach/gpio-u300.h>
>
> -/* Reference to GPIO block clock */
> -static struct clk *clk;
> +/*
> + * Bias modes for U300 GPIOs
> + *
> + * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
> + * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or
> state
> + * is not controlled by software
> + * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with
> high
> + * impedance to VDD)
> + */
> +#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
> +#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
> +#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
> +
> +/*
> + * Drive modes for U300 GPIOs (output)
> + *
> + * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high
> and
> + * low, this is the most typical case and is typically achieved with two
> + * active transistors on the output
> + * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
> + * (open collector) which means it is usually wired with other output
> + * ports which are then pulled up with an external resistor
> + * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open
> drain
> + * (open emitter) which is the same as open drain mutatis mutandis but
> + * pulled to ground
> + */
> +#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
> +#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
> +#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
> +
> +/*
> + * Register definitions for COH 901 335 variant
> + */
> +#define U300_335_PORT_STRIDE (0x1C)
> +/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
> +#define U300_335_PXPDIR (0x00)
> +#define U300_335_PXPDOR (0x00)
> +/* Port X Pin Config Register 32bit (R/W) */
> +#define U300_335_PXPCR (0x04)
> +/* This register layout is the same in both blocks */
> +#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
> +#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
> +#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
> +#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
> +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
> +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
> +#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
> +/* Port X Interrupt Event Register 32bit (R/W) */
> +#define U300_335_PXIEV (0x08)
> +/* Port X Interrupt Enable Register 32bit (R/W) */
> +#define U300_335_PXIEN (0x0C)
> +/* Port X Interrupt Force Register 32bit (R/W) */
> +#define U300_335_PXIFR (0x10)
> +/* Port X Interrupt Config Register 32bit (R/W) */
> +#define U300_335_PXICR (0x14)
> +/* This register layout is the same in both blocks */
> +#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
> +#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
> +#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
> +#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
> +/* Port X Pull-up Enable Register 32bit (R/W) */
> +#define U300_335_PXPER (0x18)
> +/* This register layout is the same in both blocks */
> +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
> +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
> +/* Control Register 32bit (R/W) */
> +#define U300_335_CR (0x54)
> +#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
>
> -/* Memory resource */
> -static struct resource *memres;
> -static void __iomem *virtbase;
> -static struct device *gpiodev;
> +/*
> + * Register definitions for COH 901 571 / 3 variant
> + */
> +#define U300_571_PORT_STRIDE (0x30)
> +/*
> + * Control Register 32bit (R/W)
> + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
> + * gives the number of GPIO pins.
> + * bit 8-2 (mask 0x000001FC) contains the core version ID.
> + */
> +#define U300_571_CR (0x00)
> +#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
> +#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
> +/*
> + * These registers have the same layout and function as the corresponding
> + * COH 901 335 registers, just at different offset.
> + */
> +#define U300_571_PXPDIR (0x04)
> +#define U300_571_PXPDOR (0x08)
> +#define U300_571_PXPCR (0x0C)
> +#define U300_571_PXPER (0x10)
> +#define U300_571_PXIEV (0x14)
> +#define U300_571_PXIEN (0x18)
> +#define U300_571_PXIFR (0x1C)
> +#define U300_571_PXICR (0x20)
> +
> +/* 8 bits per port, no version has more than 7 ports */
> +#define U300_GPIO_PINS_PER_PORT 8
> +#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
> +
> +struct u300_gpio {
> + struct gpio_chip chip;
> + struct list_head port_list;
> + struct clk *clk;
> + struct resource *memres;
> + void __iomem *base;
> + struct device *dev;
> + int irq_base;
> + int users;
> + u32 stride;
> + /* Register offsets */
> + u32 pcr;
> + u32 dor;
> + u32 dir;
> + u32 per;
> + u32 icr;
> + u32 ien;
> + u32 iev;
> +};
Do you really need all theses ? I'm thinking of the 'users' field but
there are maybe others ?
>
> struct u300_gpio_port {
> - const char *name;
> + struct list_head node;
> + struct u300_gpio *gpio;
> + char name[8];
> int irq;
> int number;
> + u8 toggle_edge_mode;
> };
>
> +/*
> + * Macro to expand to read a specific register found in the "gpio"
> + * struct. It requires the struct u300_gpio *gpio variable to exist in
> + * its context. It calculates the port offset from the given pin
> + * offset, muliplies by the port stride and adds the register offset
> + * so it provides a pointer to the desired register.
> + */
> +#define U300_PIN_REG(pin, reg) \
> + (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
>
> -static struct u300_gpio_port gpio_ports[] = {
> - {
> - .name = "gpio0",
> - .number = 0,
> - },
> - {
> - .name = "gpio1",
> - .number = 1,
> - },
> - {
> - .name = "gpio2",
> - .number = 2,
> - },
> -#ifdef U300_COH901571_3
> - {
> - .name = "gpio3",
> - .number = 3,
> - },
> - {
> - .name = "gpio4",
> - .number = 4,
> - },
> -#ifdef CONFIG_MACH_U300_BS335
> - {
> - .name = "gpio5",
> - .number = 5,
> - },
> - {
> - .name = "gpio6",
> - .number = 6,
> - },
> -#endif
> -#endif
> +/*
> + * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
> + * register.
> + */
> +#define U300_PIN_BIT(pin) \
> + (1 << (pin & 0x07))
>
> +struct u300_gpio_confdata {
> + u16 bias_mode;
> + bool output;
> + int outval;
> };
>
> +/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
> +#define BS335_GPIO_NUM_PORTS 7
> +/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
> +#define BS365_GPIO_NUM_PORTS 5
>
> -#ifdef U300_COH901571_3
> +#define U300_FLOATING_INPUT { \
> + .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
> + .output = false, \
> +}
>
> -/* Default input value */
> -#define DEFAULT_OUTPUT_LOW 0
> -#define DEFAULT_OUTPUT_HIGH 1
> +#define U300_PULL_UP_INPUT { \
> + .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
> + .output = false, \
> +}
>
> -/* GPIO Pull-Up status */
> -#define DISABLE_PULL_UP 0
> -#define ENABLE_PULL_UP 1
> +#define U300_OUTPUT_LOW { \
> + .output = true, \
> + .outval = 0, \
> +}
>
> -#define GPIO_NOT_USED 0
> -#define GPIO_IN 1
> -#define GPIO_OUT 2
> +#define U300_OUTPUT_HIGH { \
> + .output = true, \
> + .outval = 1, \
> +}
>
> -struct u300_gpio_configuration_data {
> - unsigned char pin_usage;
> - unsigned char default_output_value;
> - unsigned char pull_up;
> -};
>
> /* Initial configuration */
> -const struct u300_gpio_configuration_data
> -u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
> -#ifdef CONFIG_MACH_U300_BS335
> +static struct __initdata u300_gpio_confdata
> +bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
looks like const has been lost ?
Arnaud
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/87vct65782....@lebrac.rtp-net.org
