Package: linux-2.6
Version: 3.0.0-1
Severity: normal
Tags: wheezy
It seems the card reader is not properly recognized. When I inser a SD card
dmesg shows no activity at all and card is not mounted.
-- Package-specific info:
** Version:
Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae
root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[15063.870703] wlan0: associated
[15063.872381] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[15063.872398] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[15063.872430] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 0 (implement)
[15067.709758] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 1 (implement)
[19205.596406] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[19205.596422] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated
[19205.596438] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
false, count 1 (implement)
[19205.600520] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19205.732170] cfg80211: Calling CRDA to update world regulatory domain
[19205.745005] cfg80211: World regulatory domain updated:
[19205.745013] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[19205.745021] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19205.745027] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[19205.745034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[19205.745040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19205.745046] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19205.745075] cfg80211: Calling CRDA for country: EU
[19205.757820] cfg80211: Regulatory domain changed to country: EU
[19205.757828] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[19205.757835] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19205.757841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19205.757847] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19205.757853] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A,
2700 mBm)
[19205.832645] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19207.669818] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19207.670153] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19207.670168] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19207.868095] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 2)
[19208.068201] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 3)
[19208.268075] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[19208.268152] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19217.678315] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19218.745874] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19218.747755] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19218.747773] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19218.944077] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 2)
[19219.144088] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 3)
[19219.344082] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[19219.344157] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19223.084121] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19223.977943] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19223.978096] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19223.978109] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19224.176087] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 2)
[19224.376094] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 3)
[19224.576081] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[19224.576163] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19233.988631] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19235.082088] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19235.083641] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19235.083659] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19235.280122] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 2)
[19235.480097] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 3)
[19235.680093] wlan0: authentication with 00:23:f8:9d:ad:11 timed out
[19235.680170] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19245.092773] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19246.034044] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19246.034198] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19246.034210] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19246.056731] wlan0: authenticated
[19246.056788] wlan0: associate with 00:23:f8:9d:ad:11 (try 1)
[19246.120398] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0
aid=1)
[19246.120414] wlan0: associated
[19246.121621] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[19246.121630] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[19246.121656] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 0 (implement)
[19247.003693] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[19247.003712] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: disassociated
[19247.003731] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
false, count 0 (implement)
[19247.003742] wlan0: deauthenticating from 00:23:f8:9d:ad:11 by local choice
(reason=3)
[19247.032107] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19247.088150] cfg80211: Calling CRDA to update world regulatory domain
[19247.118219] cfg80211: World regulatory domain updated:
[19247.118229] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[19247.118239] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19247.118248] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[19247.118257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[19247.118266] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19247.118274] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[19247.118310] cfg80211: Calling CRDA for country: EU
[19247.136573] cfg80211: Regulatory domain changed to country: EU
[19247.136583] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[19247.136592] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19247.136600] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19247.136609] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A,
2000 mBm)
[19247.136617] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A,
2700 mBm)
[19672.704460] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19673.610065] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true
(implement)
[19673.610228] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false
(implement)
[19673.610241] wlan0: authenticate with 00:23:f8:9d:ad:11 (try 1)
[19673.612100] wlan0: authenticated
[19673.612160] wlan0: associate with 00:23:f8:9d:ad:11 (try 1)
[19673.615860] wlan0: RX AssocResp from 00:23:f8:9d:ad:11 (capab=0x471 status=0
aid=1)
[19673.615868] wlan0: associated
[19673.617271] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false
(implement)
[19673.617283] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[19673.617309] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 0 (implement)
[19675.738737] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled
true, count 1 (implement)
[26414.192029] pci 0000:01:00.1: vpd r/w failed. This is likely a firmware bug
on this device. Contact the card vendor for a firmware update.
** Model information
not available
** Loaded modules:
Module Size Used by
nls_utf8 12416 0
nls_cp437 12417 0
vfat 17078 0
fat 44609 1 vfat
sg 21564 0
usb_storage 35164 0
uas 13099 0
brcmsmac 489116 0
brcmutil 13187 1 brcmsmac
mac80211 165768 1 brcmsmac
cfg80211 112970 2 brcmsmac,mac80211
crc_ccitt 12331 1 brcmsmac
cpufreq_powersave 12422 0
cpufreq_stats 12758 0
mperf 12421 0
p4_clockmod 12572 1
speedstep_lib 12570 1 p4_clockmod
cpufreq_userspace 12520 0
cpufreq_conservative 12987 0
parport_pc 22059 0
ppdev 12651 0
lp 12894 0
parport 27241 3 parport_pc,ppdev,lp
rfcomm 28700 0
bnep 17301 2
bluetooth 94736 10 rfcomm,bnep
crc16 12327 1 bluetooth
binfmt_misc 12880 1
uinput 12953 1
fuse 56331 1
loop 17866 0
joydev 17006 0
arc4 12418 2
uvcvideo 56927 0
videodev 61530 1 uvcvideo
media 13692 2 uvcvideo,videodev
i915 294451 2
snd_hda_codec_idt 44757 1
drm_kms_helper 22688 1 i915
psmouse 46216 0
drm 129806 3 i915,drm_kms_helper
hp_wmi 13121 0
uhci_hcd 22275 0
snd_hda_intel 21691 1
snd_hda_codec 58364 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 12936 1 snd_hda_codec
snd_pcm 53315 2 snd_hda_intel,snd_hda_codec
serio_raw 12734 0
sparse_keymap 12707 1 hp_wmi
evdev 12995 16
pcspkr 12515 0
ac 12552 0
snd_seq 39539 0
snd_timer 22027 2 snd_pcm,snd_seq
snd_seq_device 12985 1 snd_seq
snd 38562 10
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 12992 1 snd
snd_page_alloc 12899 2 snd_hda_intel,snd_pcm
ehci_hcd 35401 0
i2c_i801 12670 0
rfkill 18522 5 cfg80211,bluetooth,hp_wmi
usbcore 104234 6 usb_storage,uas,uvcvideo,uhci_hcd,ehci_hcd
r8169 37326 0
mii 12595 1 r8169
battery 12957 0
i2c_algo_bit 12722 1 i915
i2c_core 19141 6
videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
power_supply 13283 2 ac,battery
wmi 13051 1 hp_wmi
video 17475 1 i915
button 12810 1 i915
processor 27382 2
reiserfs 176777 1
sd_mod 35493 3
crc_t10dif 12332 1 sd_mod
ahci 20897 2
libahci 18231 1 ahci
libata 133339 2 ahci,libahci
scsi_mod 135178 5 sg,usb_storage,uas,sd_mod,libata
thermal 13138 0
thermal_sys 17677 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 94180000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 30c0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 94000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 94200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 93000000-93ffffff
Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 92000000-92ffffff
Prefetchable memory behind bridge: 0000000091000000-0000000091ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 94204400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30cc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30c8 [size=4]
Region 4: I/O ports at 30a0 [size=16]
Region 5: Memory at 94204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at 90004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 90000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
01:00.1 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device
[10ec:5288] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:148a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 93000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:145c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 92000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 174f:1122 Syntek
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.0.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-3.0.0-1-686-pae suggests:
ii grub-pc 1.99-11 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.33 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20110814191831.5084.44450.report...@stt300.linux.site
